My Tips and Tricks for How to Boil Potatoes (2024)

FAQs

My Tips and Tricks for How to Boil Potatoes? ›

In a large pot, add potatoes, 1 tablespoon salt, and cold water to cover by 1 inch. Bring to a boil, reduce heat to medium, and cook uncovered until potatoes are tender and can easily be pierced by a knife, about 10 to 15 minutes (20 to 25 minutes for larger potatoes).

Bring the water to a boil. Reduce the heat to medium-low. Cover the pot with a lid and let simmer until fork-tender, about 10 to 15 minutes for small and/or cubed potatoes or 20 to 25 minutes for large potatoes. Drain and cool.

Here's the golden rule of potato boiling: Instead of dropping them into a pot of already boiling water, cover the potatoes in cold water, then bring to a boil.

For most potato dishes it's important to add the potatoes to cold water and allow the water to come to a boil with the potatoes in the water. The potato starch can react as soon as it comes in contact with hot water, which will promote uneven cooking and mealy potatoes.

Place the pot over medium-high heat and bring to a boil. Once boiling, reduce the heat to a bare simmer. Do not cover. (Covering changes the environment in the pot and can make the potatoes turn mushy.)

The starch in potatoes is held together by pectin. When that pectin breaks down too quickly in the boiling process, mushy potatoes result. Adding vinegar to the water fixes that problem because, as López-Alt explains, “pectin breaks down much more slowly in acidic environments.”

Dense potatoes don't absorb seasonings easily, so you'll need to salt the water liberally so that the water the potatoes do drink up also carries in seasoning. And because potatoes are so timid in flavor, they need that salt to bring them out of their shells. Pour some salt in, then keep going.

I first came across this trick from a post on Serious Eats – baking soda creates an alkaline environment for the potatoes to boil in, which maximises the starch so our roast potatoes are extra crispy! Swish the potatoes around your colander after boiling.

Why potatoes can absorb too much water. If your potatoes have been growing in very dry soil, the potatoes themselves will have a fairly low moisture content when harvested. What this then means is that when the potatoes are build they absorb more water and fall to pieces quite quickly.

Peeled, cubed potatoes cut into small, one-inch pieces should cook in 10 to 12 minutes, once the water reaches a boil. Larger pieces (about 2 inches across) may need longer, around 15 minutes. Medium whole potatoes should boil 20 minutes before they'll be tender.

Do you rinse potatoes in cold water after boiling? ›

Rinsing potatoes helps remove excess starch, so it is recommended to rinse the potatoes before cooking. To ensure even more starch is out of the way, it's recommended that they even be quickly rinsed after boiling. We recommend using hot water for rinsing after boiling and cold water prior to boiling.

If you overcook them they disintegrate and your potatoes will be soupy. The specific cooking time depends on the size of your potato: a perfectly cooked piece of potato should give no resistance when cut with a knife, but shouldn't crumble into a million pieces.

In the anomaly, very-high solid potato little water resides within, hence nothing to permeate around or within the solids' cells to cook the potato, no matter how long exposed to surrounding, external heat medium such as baking or boiling - explaining the hard or crunchy potatoes texture described.

In general, I like Yukon Gold potatoes for boiling. They are medium-starch potatoes that contain more moisture so they can handle boiling well without completely falling apart.

Season with a teaspoon of salt per pound of potatoes. Bring water to a boil over high heat, then reduce heat to medium and cook at rapid simmer until potatoes are easily pierced with a paring knife, about 10 minutes for chopped potatoes and 20 minutes for whole potatoes.

Place a wooden spoon across the top of the pot. Wood is more heat-resistant than metal, so it stays cooler to burst hot bubbles that reach it. Add a dash of butter or oil to water with starchy foods such as potatoes or pasta. The oil remains at the top and breaks the surface tension, helping pop bubbles.

Waxy potatoes can be cooked whole or cut, with or without the skin. Starchy potatoes should be cooked whole with the skin on, then peeled and cut after they're cooked. Select medium Russet potatoes, not large ones, to ensure the skin doesn't split while cooking.

Soaking potatoes in water helps remove excess starch. Excess starch can inhibit the potatoes from cooking evenly as well as creating a gummy or sticky texture on the outside of your potatoes. Cold water is used because hot water would react with the starch activating it, making it harder to separate from the potatoes.