NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list ofAbbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
3M / Electrical Markets Division | ![]() |
3M Center, Building 201-2C-11 | |
St. Paul, MN 55144 | |
United States | |
651-736-9030 | |
Visit this company's website |
Facility : Angleton, TX
Protective (Barrier) Materials
Water | Water | |||
Water Contact | Contact | Contact | ||
Trade Designation | Size Restriction | Temp | Material | |
Coatings - Fittings | ||||
3M Scotchkote Fusion Bonded Epoxy Coating 6233W 11G[1] | >= 1/2" | D. HOT | PEC | |
3M Scotchkote Fusion Bonded Epoxy Coating 6233W 4G[1] | >= 1/2" | D. HOT | PEC | |
3M Scotchkote Fusion Bonded Epoxy Coating 6233W 8G[1] | >= 1/2" | D. HOT | PEC | |
ScotchKote 134[4] | >= 1/2"[5] | D. HOT | PEC | |
Scotchkote 206N[2] | >= 4" | D. HOT | PEC | |
Scotchkote 206N Extra LG[2] | >= 4" | D. HOT | PEC | |
Scotchkote 206N Fluid Bed[2] | >= 4" | D. HOT | PEC | |
Scotchkote 206N Long Gel[2] | >= 4" | D. HOT | PEC | |
[1] Colors: Dark Green Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 50 Maximum thinner: None Final Cure Time and Temperature: 6233W 4G: 30-45 seconds at 450°F; 6233W 8G: 60-90 seconds at 450°F; 6233W 11G: 90-120 seconds at 450°F Special Comments: Preheat part to 425° - 488° F before application of powder.[2] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 60 Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at 400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F[4] Number of Coats: 1 Sequence of Coats: N/A Maximum Field Use Dry Film Thickness (in mils): 60 Maximum Thinner: None Final Cure Time and Temperature: 25 minutes at 425° F[5] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L for pump end use. | ||||
Coatings - Pipe | ||||
3M Scotchkote Fusion Bonded Epoxy Coating 6233W 11G[1] | >= 1/2" | D. HOT | PEC | |
3M Scotchkote Fusion Bonded Epoxy Coating 6233W 4G[1] | >= 1/2" | D. HOT | PEC | |
3M Scotchkote Fusion Bonded Epoxy Coating 6233W 8G[1] | >= 1/2" | D. HOT | PEC | |
ScotchKote 134[4] | >= 1/2"[5] | D. HOT | PEC | |
Scotchkote 206N[2] | >= 4" | D. HOT | PEC | |
Scotchkote 206N Extra LG[2] | >= 4" | D. HOT | PEC | |
Scotchkote 206N Fluid Bed[2] | >= 4" | D. HOT | PEC | |
Scotchkote 206N Long Gel[2] | >= 4" | D. HOT | PEC | |
[1] Colors: Dark Green Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 50 Maximum thinner: None Final Cure Time and Temperature: 6233W 4G: 30-45 seconds at 450°F; 6233W 8G: 60-90 seconds at 450°F; 6233W 11G: 90-120 seconds at 450°F Special Comments: Preheat part to 425° - 488° F before application of powder.[2] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 60 Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at 400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F[4] Number of Coats: 1 Sequence of Coats: N/A Maximum Field Use Dry Film Thickness (in mils): 60 Maximum Thinner: None Final Cure Time and Temperature: 25 minutes at 425° F[5] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L for pump end use. | ||||
Coatings - Pump | ||||
ScotchKote 134[4] | [5] | D. HOT | PEC | |
Scotchkote 206N[2][3] | >= 2" | D. HOT | PEC | |
Scotchkote 206N Extra LG[2][3] | >= 2" | D. HOT | PEC | |
Scotchkote 206N Fluid Bed[2][3] | >= 2" | D. HOT | PEC | |
Scotchkote 206N Long Gel[2][3] | >= 2" | D. HOT | PEC | |
[2] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 60 Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at 400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F[3] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L. for pump end use.[4] Number of Coats: 1 Sequence of Coats: N/A Maximum Field Use Dry Film Thickness (in mils): 60 Maximum Thinner: None Final Cure Time and Temperature: 25 minutes at 425° F[5] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L for pump end use. | ||||
Coatings - Tank | ||||
ScotchKote 134[4] | >= 5 gal. | D. HOT | PEC | |
Scotchkote 206N[2] | >= 5 gal. | D. HOT | PEC | |
Scotchkote 206N Extra LG[2] | >= 5 gal. | D. HOT | PEC | |
Scotchkote 206N Fluid Bed[2] | >= 5 gal. | D. HOT | PEC | |
Scotchkote 206N Long Gel[2] | >= 5 gal. | D. HOT | PEC | |
[2] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 60 Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at 400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F[4] Number of Coats: 1 Sequence of Coats: N/A Maximum Field Use Dry Film Thickness (in mils): 60 Maximum Thinner: None Final Cure Time and Temperature: 25 minutes at 425° F | ||||
Coatings - Valve | ||||
3M Scotchkote Fusion Bonded Epoxy Coating 6233W 11G[1] | >= 1/2" | D. HOT | PEC | |
3M Scotchkote Fusion Bonded Epoxy Coating 6233W 4G[1] | >= 1/2" | D. HOT | PEC | |
3M Scotchkote Fusion Bonded Epoxy Coating 6233W 8G[1] | >= 1/2" | D. HOT | PEC | |
ScotchKote 134[4] | >= 1/2"[5] | D. HOT | PEC | |
Scotchkote 206N[2] | >= 2" | D. HOT | PEC | |
Scotchkote 206N Extra LG[2] | >= 2" | D. HOT | PEC | |
Scotchkote 206N Fluid Bed[2] | >= 2" | D. HOT | PEC | |
Scotchkote 206N Long Gel[2] | >= 2" | D. HOT | PEC | |
[1] Colors: Dark Green Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 50 Maximum thinner: None Final Cure Time and Temperature: 6233W 4G: 30-45 seconds at 450°F; 6233W 8G: 60-90 seconds at 450°F; 6233W 11G: 90-120 seconds at 450°F Special Comments: Preheat part to 425° - 488° F before application of powder.[2] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 60 Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at 400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F[4] Number of Coats: 1 Sequence of Coats: N/A Maximum Field Use Dry Film Thickness (in mils): 60 Maximum Thinner: None Final Cure Time and Temperature: 25 minutes at 425° F[5] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L for pump end use. |
3R Valve, LLC | |
29299 Madison Road | |
Echo, OR 97826 | |
United States | |
541-376-8107 | |
Visit this company's website |
Facility : Echo, OR
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Valves[G] | ||||
ASR (Aqua System Recovery) Valve[1] | 5" - 14" | CLD 23 | MLTPL | |
[1] Certified for use in municipal wells in conjunction with a submersible pump. Not Certified for residential use.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
A. W. Chesterton Co. | |
860 Salem Street | |
Groveland, MA 01834 | |
United States | |
978-469-6446 |
Facility : Groveland, MA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Miscellaneous Process Devices/Components[1] | ||||
150 Non-Split Cartridge Seal[G] | [2] | D. HOT | MLTPL | |
1510 Non-Split Cartridge Seal[G] | [2] | D. HOT | MLTPL | |
155 Non-Split Cartridge Seal[G] | [2] | D. HOT | MLTPL | |
1725A[3][G] | D. HOT | PTFE | ||
180 Non-Split Cartridge Seal[G] | [2] | D. HOT | MLTPL | |
1810 Non-Split Cartridge Seal[G] | [2] | D. HOT | MLTPL | |
442 Split Mechanical Seal[G] | [2] | D. HOT | MLTPL | |
442C Split Mechanical Seal[G] | [2] | D. HOT | MLTPL | |
S10 Non-Split Cartridge Seal[G] | [2] | D. HOT | MLTPL | |
Single Non-Split Cartridge Seals[G] | [2] | D. HOT | MLTPL | |
Spare Part Kit (SPK)[G] | [2] | D. HOT | MLTPL | |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.[2] Certified for mechanical seals for use with pump shafts ranging from 1" - 12" in diameter. Certified for equivalent metric sizes.[3] Certified for use as a packing material in pumps with shaft diameters >= 0.625".[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Protective (Barrier) Materials
Water | Water | |||
Water Contact | Contact | Contact | ||
Trade Designation | Size Restriction | Temp | Material | |
Coatings - Fittings | ||||
ARC S1 PW BLU[1] | >= 1/2" | CLD 23 | EPOXY | |
ARC S1 PW HB WH[2] | >= 18" | CLD 23 | EPOXY | |
ARC S1 PW WH[1] | >= 1/2" | CLD 23 | EPOXY | |
[1] Colors: Blue, White Number of coats: 3 Maximum field use dry film thickness (in mils): 45 (15 mils/coat) Recoat cure time and temperature: 6 hours at 77°F Final cure time and temperature: 7 days at 77°F Special Comments: Mix ratio of Part A:B is 2:1 by volume[2] Colors: White Number of coats: 1-3 Maximum field use dry film thickness (in mils): 240 (80 mils/coat) Recoat cure time and temperature: 6 hours at 77°F Final cure time and temperature: 7 days at 77°F Special Comments: Mix ratio of Part A:B is 2:1 by volume. Minimum mil thickness is 1 coat at 80 mils. | ||||
Coatings - Pump | ||||
ARC S1 PW BLU[1] | >= 1/2" | CLD 23 | EPOXY | |
ARC S1 PW WH[1] | >= 1/2" | CLD 23 | EPOXY | |
[1] Colors: Blue, White Number of coats: 3 Maximum field use dry film thickness (in mils): 45 (15 mils/coat) Recoat cure time and temperature: 6 hours at 77°F Final cure time and temperature: 7 days at 77°F Special Comments: Mix ratio of Part A:B is 2:1 by volume | ||||
Coatings - Pipe | ||||
ARC S1 PW WH[1] | >= 1/2" | CLD 23 | EPOXY | |
ARC S1 PW HB WH[2] | >= 18" | CLD 23 | EPOXY | |
ARC S1 PW BLU[1] | >= 1/2" | CLD 23 | EPOXY | |
[1] Colors: Blue, White Number of coats: 3 Maximum field use dry film thickness (in mils): 45 (15 mils/coat) Recoat cure time and temperature: 6 hours at 77°F Final cure time and temperature: 7 days at 77°F Special Comments: Mix ratio of Part A:B is 2:1 by volume[2] Colors: White Number of coats: 1-3 Maximum field use dry film thickness (in mils): 240 (80 mils/coat) Recoat cure time and temperature: 6 hours at 77°F Final cure time and temperature: 7 days at 77°F Special Comments: Mix ratio of Part A:B is 2:1 by volume. Minimum mil thickness is 1 coat at 80 mils. | ||||
Coatings - Valve | ||||
ARC S1 PW WH[1] | >= 1/2" | CLD 23 | EPOXY | |
ARC S1 PW BLU[1] | >= 1/2" | CLD 23 | EPOXY | |
[1] Colors: Blue, White Number of coats: 3 Maximum field use dry film thickness (in mils): 45 (15 mils/coat) Recoat cure time and temperature: 6 hours at 77°F Final cure time and temperature: 7 days at 77°F Special Comments: Mix ratio of Part A:B is 2:1 by volume | ||||
Coatings - Tank | ||||
ARC S1 PW BLU[1] | >= 1,500 gal. | CLD 23 | EPOXY | |
ARC S1 PW WH[1] | >= 1,500 gal. | CLD 23 | EPOXY | |
ARC S1 PW HB WH[2] | >= 1,500 gal. | CLD 23 | EPOXY | |
[1] Colors: Blue, White Number of coats: 3 Maximum field use dry film thickness (in mils): 45 (15 mils/coat) Recoat cure time and temperature: 6 hours at 77°F Final cure time and temperature: 7 days at 77°F Special Comments: Mix ratio of Part A:B is 2:1 by volume[2] Colors: White Number of coats: 1-3 Maximum field use dry film thickness (in mils): 240 (80 mils/coat) Recoat cure time and temperature: 6 hours at 77°F Final cure time and temperature: 7 days at 77°F Special Comments: Mix ratio of Part A:B is 2:1 by volume. Minimum mil thickness is 1 coat at 80 mils. |
A. W. Chesterton Co. | |
860 Salem Street | |
Groveland, MA 01834 | |
United States | |
978-469-6446 | |
Visit this company's website |
Facility : # 1 USA
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Patching Materials | ||||
ARC 5ES | [1] | C. HOT | EPOXY | |
[1] The exposed surface area of each sealant in a household distribution system should not exceed 1.3 sq. cm/L or .2 sq. in/L. |
A.W. Cook Cement Products, Inc. | |
242 Amy Industrial Lane | |
Hoschton, GA 30548 | |
United States | |
706-654-3677 |
Facility : Hoschton, GA
Protective (Barrier) Materials
Water | Water | |||
Water Contact | Contact | Contact | ||
Trade Designation | Size Restriction | Temp | Material | |
Coatings - Fittings[1] | ||||
Cemtec Silatec PW | >= 6" | CLD 23 | CMNT | |
[1] Coating Notes: Color: Gray Number of Coats: 2 - 4 Maximum Field Use Dry Thickness (in mils): 2000 mils Recoat Cure Time and Temperature: 1 hour at 75°F Final Cure Time/Temperature: 7 days @ 75°F Special Comments: Mix ratio is 4 quarts of water to one 60 lb bag of Cemtec Silatec PW. Ensure proper surface preparation guidelines are followed prior to installation. | ||||
Coatings - Pipe[1] | ||||
Cemtec Silatec PW | >= 48" | CLD 23 | CMNT | |
[1] Coating Notes: Color: Gray Number of Coats: 2 - 4 Maximum Field Use Dry Thickness (in mils): 2000 mils Recoat Cure Time and Temperature: 1 hour at 75°F Final Cure Time/Temperature: 7 days @ 75°F Special Comments: Mix ratio is 4 quarts of water to one 60 lb bag of Cemtec Silatec PW. Ensure proper surface preparation guidelines are followed prior to installation. | ||||
Coatings - Tank[1] | ||||
Cemtec Silatec PW | >= 10,000 gal. | CLD 23 | CMNT | |
[1] Coating Notes: Color: Gray Number of Coats: 2 - 4 Maximum Field Use Dry Thickness (in mils): 2000 mils Recoat Cure Time and Temperature: 1 hour at 75°F Final Cure Time/Temperature: 7 days @ 75°F Special Comments: Mix ratio is 4 quarts of water to one 60 lb bag of Cemtec Silatec PW. Ensure proper surface preparation guidelines are followed prior to installation. |
A.Y. McDonald Manufacturing | |
4800 Chavenelle Road | |
Dubuque, IA 52001 | |
United States | |
563-583-7311 |
Facility : Santa Fe Springs, CA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings | ||||
Copper Alloy Press-Connect Pressure Fittings | 1/8" - 2 | C. HOT | BRASS |
[1] Certified for the following configurations: 90º Elbow Drop Ear PXF 1/2" x 3/8" - 1" x 1" 90º Elbow Brass PXF 1/2" X 3/8" - 2" x 2" 90º Elbow HI Ear PXF 1/2" Elbow Double Drop PXPXF 1/2" - 3/4" Union PxP 1/2" - 2" Union PxF 1/2" - 2" Union PxM 1/2" - 2" Vent Elbow PXPXF 1/2" x 1/2" x 1/8" - 3/4" x 3/4" x 1/8"[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
AAG - All American Gasket | |
291 Howard St. | |
Brockton, MA 02302 | |
United States | |
508-588-7500 |
Facility : Brockton, MA
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials[1][G] | ||||
EP61 | [2] | C. HOT | EPDM | |
[1] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 0.2 square inches/L.[2] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
O-Rings[1][G] | ||||
EP61 | [2] | C. HOT | EPDM | |
[1] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 0.2 square inches/L.[2] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
ABB Ltd. | |
Oldends Lane | |
Stonehouse, Glos | |
GL10 3TA | |
United Kingdom | |
44 14 5382 6661 |
Facility : Warminster, PA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Water Meters[1][G] | ||||
AquaMaster FEF[1] | >= 250 mm | CLD 23 | MLTPL | |
AquaMaster FER[1] | 40 mm - 600 mm | CLD 23 | MLTPL | |
AquaMaster FEW[2] | 40 mm - 2400 mm | CLD 23 | MLTPL | |
FEW XYZ.F[2] | 40 mm - 2400 mm | CLD 23 | MLTPL | |
FEW XYZ.R[1] | 40 mm - 600 mm | CLD 23 | MLTPL | |
ProcessMaster FEW XYZ[2] | 40 mm - 2400 mm | CLD 23 | MLTPL | |
WaterMaster FEF[1] | >= 250 mm | CLD 23 | MLTPL | |
WaterMaster FER[1] | 40 mm - 600 mm | CLD 23 | MLTPL | |
WaterMaster FEW[2] | 40 mm - 2400 mm | CLD 23 | MLTPL | |
[1] For all meters: X - Type of electronics 4 - AquaMaster 5 - WaterMaster Y - Tier of Electronics 1 - Standard Electronics 3 - Advanced Electronics 5 - Premium Electronics Z - Type of mounting 1 - Integral with transmitter 2 - Remote with transmitter (Sensor + Transmitter) 8 - Sensor only Type of bore and liner F - FEF/Full bore/Rubber liner R - FER/Reduced bore/Rubber liner [1] For all meters: X - Type of electronics 4 - AquaMaster 5 - WaterMaster Y - Tier of Electronics 1 - Standard Electronics 3 - Advanced Electronics 5 - Premium Electronics Z - Type of mounting 1 - Integral with transmitter 2 - Remote with transmitter (Sensor + Transmitter) 8 - Sensor only Type of bore and liner F - FEF/Full bore/Rubber liner R - FER/Reduced bore/Rubber liner [2] For all meters: X - Type of electronics 4 - AquaMaster 5 - WaterMaster 6 - ProcessMaster Y - Tier of Electronics 1 - Standard Electronics 2 - Enhanced Electronic 3 - Advanced Electronics 5 - Premium Electronics Z - Type of mounting 1 - Integral with transmitter 2 - Remote with transmitter (Sensor + Transmitter) 8 - Sensor only Type of bore and liner F - FEF/Full bore/Rubber liner[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
ABB S.p.A. | |
Via Luigi Vaccani, 4 | |
22016 Ossuccio, Como | |
Italy | |
39 03 445 8111 | |
Visit this company's website |
Facility : Warminster, PA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Transmitters/Gauges[G] | ||||
261AS ABSOLUTE PRESS XMTR | 60 x 60 x 112 mm | C. HOT | MLTPL | |
261GS GAUGE PRESS XMTR | 60 x 60 x 112 mm | C. HOT | MLTPL | |
266DSH Differential Pressure Transmitter | 142 x 142 x 210 mm | C. HOT | MLTPL | |
266HSH Gauge Pressure Transmitter | 142 x 91 x 215 mm | C. HOT | MLTPL | |
266NSH Absolute Pressure Transmitter | 142 x 91 x 215 mm | C. HOT | MLTPL | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Accella Polyurethane Systems, LLC DBA Carlisle Polyurethane Systems, | |
Carlisle Roof Foam and Coatings | |
2500 Adie Road | |
Maryland Heights, MO 63043 | |
United States | |
770-528-9556 | |
Visit this company's website |
Facility : Rancho Cucamonga, CA
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Grouts[1] | ||||
Substratum | [2] | CLD 23 | PUR | |
Substratum 2F | [2] | CLD 23 | PUR | |
Substratum 2R | [2] | CLD 23 | PUR | |
Substratum 3F | [2] | CLD 23 | PUR | |
Substratum 3R | [2] | CLD 23 | PUR | |
Substratum 4F | [2] | CLD 23 | PUR | |
Substratum 4R | [2] | CLD 23 | PUR | |
Substratum 4S | [2] | CLD 23 | PUR | |
Substratum 5R | [2] | CLD 23 | PUR | |
Substratum 6R | [2] | CLD 23 | PUR | |
Substratum Geopolymer | [2] | CLD 23 | PUR | |
[1] Certified for product with the following densities and reaction speeds: 2 pounds per cubic foot (regular speed) 2 pounds per cubic foot (fast speed) 3 pounds per cubic foot (regular speed) 3 pounds per cubic foot (fast speed) 4 pounds per cubic foot (slow speed) 4 pounds per cubic foot (regular speed) 4 pounds per cubic foot (fast speed) 5 pounds per cubic foot (regular speed) 6 pounds per cubic foot (regular speed) Mix ratio is 1:1 (A:B) by volume or 8.1:6.9 (A:B) by weight. Minimum cure time is 60 minutes at ambient temperatures.[2] Certified for a maximum surface area to volume ratio of 0.375 square inches per liter. |
Facility : Chattanooga, TN
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Grouts[1] | ||||
Substratum | [2] | CLD 23 | PUR | |
Substratum 2F | [2] | CLD 23 | PUR | |
Substratum 2R | [2] | CLD 23 | PUR | |
Substratum 3F | [2] | CLD 23 | PUR | |
Substratum 3R | [2] | CLD 23 | PUR | |
Substratum 4F | [2] | CLD 23 | PUR | |
Substratum 4R | [2] | CLD 23 | PUR | |
Substratum 4S | [2] | CLD 23 | PUR | |
Substratum 5R | [2] | CLD 23 | PUR | |
Substratum 6R | [2] | CLD 23 | PUR | |
Substratum Geopolymer | [2] | CLD 23 | PUR | |
[1] Certified for product with the following densities and reaction speeds: 2 pounds per cubic foot (regular speed) 2 pounds per cubic foot (fast speed) 3 pounds per cubic foot (regular speed) 3 pounds per cubic foot (fast speed) 4 pounds per cubic foot (slow speed) 4 pounds per cubic foot (regular speed) 4 pounds per cubic foot (fast speed) 5 pounds per cubic foot (regular speed) 6 pounds per cubic foot (regular speed) Mix ratio is 1:1 (A:B) by volume or 8.1:6.9 (A:B) by weight. Minimum cure time is 60 minutes at ambient temperatures.[2] Certified for a maximum surface area to volume ratio of 0.375 square inches per liter. |
Access-Able Technologies, Inc. | |
1275 Bennett Drive #115 | |
Longwood, FL 32750 | |
United States | |
800-572-4894 | |
407-834-2999 |
Facility : # 1 USA
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Patching Materials[G] | ||||
Pow-R Stick Steel Hard Epoxy Putty (Copper Color) | [1][2] | C. HOT | EPOXY | |
Pow-R Stick Steel Hard Epoxy Putty (Grey Color) | [1][2] | C. HOT | EPOXY | |
Pow-R Stick Steel Hard Epoxy Putty (White Color) | [1][2] | C. HOT | EPOXY | |
STIC-O-STEEL POW-R Putty | [1][2] | C. HOT | EPOXY | |
[1] Certified for a maximum surface area to volume ratio of 0.3 sq. in./L in pipe or 1% of a 20,000 gallon tank.[2] To obtain the proper mix, use at least a 3/4" length, but no more than 1/3 of a full stick, of product which has been cut with a knife. Product must be mixed for 60-90 seconds.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Accor Technology Inc. | |
3310 South East 5th Street | |
East Wenatchee, WA 98802 | |
United States | |
800-447-5848 | |
509-662-0608 |
Facility : East Wenatchee, WA
Mechanical Plumbing Devices
Trade Designation | ||||
Connector Hoses | ||||
Riser Assemblies[1] | ||||
R-5CP(1)-7(2) | ||||
R-5CS(1)-7(2) | ||||
R-5LP(1)-5(2) | ||||
R-5LS(1)-5(2) | ||||
R-CP(1)-7(2) | ||||
R-CS(1)-7(2) | ||||
R-LP(1)-3(2) | ||||
R-LP(1)-5(2) | ||||
R-LS(1)-3(2) | ||||
R-LS(1)-5(2) | ||||
R2-IP(1)-2(2) | ||||
R3-LP(1)-3(2) | ||||
RCP45T12-7(2) | ||||
[1] (1) Hose length (2) Packaging options (M, F, E, EL, CF, CM, PF, FM, XM, XF, XE, XL, XC, or R) | ||||
Supply Stops | ||||
Coupling w/ attached riser[1][G] | ||||
PR30-LP(1)-3(2) | ||||
PR30-SP(1)-3(2) | ||||
PR50-CP(1)-7(2) | ||||
PR50-CS(1)-7(2) | ||||
PR50-LP(1)-3(2) | ||||
PR50-LP(1)-5(2) | ||||
PR50-LS(1)-3(2) | ||||
PR50-LS(1)-5(2) | ||||
PR50-P(1)-RK(2) | ||||
PR50-S(1)-RK(2) | ||||
PR50-SP(1)-5(2) | ||||
[1] (1) Hose length (2) Packaging options (M, F, E, EL, CF, CM, PF, FM, XM, XF, XE, XL, XC, or R)[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Valve or Coupling[1][G] | ||||
PC5-3(2) | ||||
PC5S-3(2) | ||||
PE5-3(2) | ||||
PE5S-3(2) | ||||
PO5-2(2) | ||||
PO5-3(2) | ||||
PO5-75(2) | ||||
PO5-CAP(2) | ||||
PR-30(2) | ||||
PR-50(2) | ||||
TH5-3(2) | ||||
[1] (1) Hose length (2) Packaging options (M, F, E, EL, CF, CM, PF, FM, XM, XF, XE, XL, XC, or R)[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Valve w/ attached riser[1][G] | ||||
PC5-CP(1)-7(2) | ||||
PC5-CS(1)-7(2) | ||||
PC5-LP(1)-5(2) | ||||
PC5-LS(1)-5(2) | ||||
PE5-CP(1)-7(2) | ||||
PE5-CS(1)-7(2) | ||||
PE5-LP(1)-5(2) | ||||
PE5-LS(1)-5(2) | ||||
PO5-CP(1)-7(2) | ||||
PO5-CS(1)-7(2) | ||||
PO5-IP(1)-2(2) | ||||
PO5-LP(1)-3(2) | ||||
PO5-LP(1)-5(2) | ||||
PO5-LP4T15-5(2) | ||||
PO5-LS(1)-3(2) | ||||
PO5-LS(1)-5(2) | ||||
PO5-LS4T15-5(2) | ||||
PO5-P(1)-RK(2) | ||||
PO5-P-PR30(2) | ||||
PO5-S(1)-RK(2) | ||||
PO5-S-PR30(2) | ||||
PO5P10T10RK(2) | ||||
[1] (1) Hose length (2) Packaging options (M, F, E, EL, CF, CM, PF, FM, XM, XF, XE, XL, XC, or R)[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
ACCOR Technology, Inc. | |
3310 5th Street Southeast | |
East Wenatchee, WA 98802 | |
United States | |
509-888-2233 | |
Visit this company's website |
Facility : East Wenatchee, WA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Miscellaneous Process Devices/Components[G] | ||||
PushOn 113A Accor Arrester | 1/2" | C. HOT | MLTPL | |
PushOn 109A Accor Arrester | 1/2" | C. HOT | MLTPL | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[G] | ||||
PF50C XE[1] | 1/2" | C. HOT | MLTPL | |
PF50E XE[1] | 1/2" | C. HOT | MLTPL | |
PF50MT XE[2] | 1/2" | C. HOT | MLTPL | |
PF50T XE[1] | 1/2" | C. HOT | MLTPL | |
PF75C XE[1] | 3/4" | C. HOT | MLTPL | |
PF75E XE[1] | 3/4" | C. HOT | MLTPL | |
PF75T XE[1] | 3/4" | C. HOT | MLTPL | |
[1] Configuration code breakdown: P – PushOn F – Fitting 50 - 1/2" 75 - 3/4" M – Manifold T – Tee C – Coupling E – Elbow X – Compatible with PEX pipe (as well as copper and CPVC) E – Bulk packaged (each)[2] PF50MT XE – 1/2" PushOnManifold Tee Code: P – PushOn F – Fitting 50 – 1/2 inch M – Manifold T – Tee X – Compatible with PEX pipe (as well as copper and CPVC). E – Bulk packaged (each)[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Ace Duraflo Systems, LLC | |
3122 West Alpine Street | |
Santa Ana, CA 92704 | |
United States | |
714-256-0220 | |
Visit this company's website |
Facility : # 1 USA
Protective (Barrier) Materials
Water | Water | |||
Water Contact | Contact | Contact | ||
Trade Designation | Size Restriction | Temp | Material | |
Coatings - Pipe - Immediate Return to Service | ||||
ePIPE FRS[1][2] | >= 1/2" | C. HOT | EPOXY | |
[1] Colors: Red Number of Coats: 1 Maximum Field Use Dry Thickness (in mils): 4-500 Final Cure Time/Temperature: 15 minutes in water at a service temperature of 23C and greater. Special Comments: Mix ratio of A:B is 2:1 by volume. Product shall be preconditioned to at least 95F prior to mixing. Induction time is at least 10 minutes. Cure with air at a minimum of 95F for at least 2 hours. Following the air cure, product cure shall continue in water at a service temperature of 23C and greater for 15 minutes with a flow rate of 1 to 5 liters per minute prior to being placed into service.[2] Certified for Immediate Return to Service. |
Ace Hardware Corporation | |
2200 Kensington Ct | |
Oakbrook, IL 60523 | |
United States | |
630-990-8686 | |
Visit this company's website |
Facility : Omaha, NE
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Sealants | ||||
ACE PIPE THREAD COMPOUND TFE PASTE | >= 1/2" | C. HOT | SLT | |
Ace Pipe Thread Compound | >= 1/2" | C. HOT | SLT |
Ace Roto-Mold | |
Division of Den Hartog Industries Inc. | |
4010 Hospers Drive South | |
P.O. Box 425 | |
Hospers, IA 51238-0425 | |
United States | |
800-342-3408 | |
712-752-8432 | |
Visit this company's website |
Facility : Hospers, IA
Protective (Barrier) Materials
Water | Water | |||
Water Contact | Contact | Contact | ||
Trade Designation | Size Restriction | Temp | Material | |
Tanks[1] | ||||
ACTXXXX-LP Cistern Tank | [2] | CLD 23 | MLTPL | |
ARM-VVVVV | [2] | CLD 23 | MLTPL | |
AST-XXXX-1W Cistern Tank | [2] | CLD 23 | MLTPL | |
CBXXXX-YY Batch Tank - Cone Bottom | [2] | CLD 23 | MLTPL | |
CBXXXX-YY Cone Bottom - Industrial Top | [2] | CLD 23 | MLTPL | |
CBXXXX-YYY Cone Bottom Tank | [2] | CLD 23 | MLTPL | |
CBXXXXX-YYY Cone Bottom Tank | [2] | CLD 23 | MLTPL | |
DWXXXX-120 Double Wall Vertical Tank | [2] | CLD 23 | MLTPL | |
DWXXXX-YY Double Wall Vertical Tank | [2] | CLD 23 | MLTPL | |
EOXXXX-YY Elliptical Tank - Offset Lid | [2] | CLD 23 | MLTPL | |
FMXXXX-YYS Leg Tank | [2] | CLD 23 | MLTPL | |
FMXXXX-YYY Leg Tank | [2] | CLD 23 | MLTPL | |
FS01600 Sectional Tank | 1600 gal. | CLD 23 | MLTPL | |
FS01610 Flat Bottom Leg Tank | 1610 gal. | CLD 23 | MLTPL | |
FSXXXXX-YY Leg Tank | [2] | CLD 23 | MLTPL | |
FSXXXXX-YYW Leg Tank | [2] | CLD 23 | MLTPL | |
GVXXXX-86 Gusset Top Tank | [2] | CLD 23 | MLTPL | |
GVXXXXX-142 Vertical Polyethylene Storage Tank | [2] | CLD 23 | MLTPL | |
HEDXXXX-YY Elliptical Tank | [2] | CLD 23 | MLTPL | |
HEXXXX-YY Elliptical Tank | [2] | CLD 23 | MLTPL | |
HZXXXXX-YY Horizontal Tank | [2] | CLD 23 | MLTPL | |
IBFDXX-SET Inductor Tank | [2] | CLD 23 | MLTPL | |
INFD085 Full Drain Inductor | 85 gal. | CLD 23 | MLTPL | |
INFDXXX-YY Inductor Tank | [2] | CLD 23 | MLTPL | |
INXXXX-YYYY Inductor Tank | [2] | CLD 23 | MLTPL | |
LPXXXX-HT Holding Tank | [2] | CLD 23 | MLTPL | |
LPXXXX-RT Low Profile Tank | [2] | CLD 23 | MLTPL | |
LPXXXX-RT Rectangle Tank | [2] | CLD 23 | MLTPL | |
OCXXXX-YY Batch Tank - Cone Bottom - Open Top | [2] | CLD 23 | MLTPL | |
OCXXXX-YY Cone Bottom Tank - Open Top | [2] | CLD 23 | MLTPL | |
OP0210-40 Open Top | 210 gal. | CLD 23 | MLTPL | |
OPXXXX-YY Batch Tank- Vertical - Open Top | [2] | CLD 23 | MLTPL | |
PCOXXX-YYZ PCO tank | [2] | CLD 23 | MLTPL | |
PUXXXX-YY Pickup Tank | [2] | CLD 23 | MLTPL | |
SBXXXXX Spot Spray | [2] | CLD 23 | MLTPL | |
SP-XXXX-QQ Applicator Tank | [2] | CLD 23 | MLTPL | |
SP-XXXXQQ Applicator Tank | [2] | CLD 23 | MLTPL | |
SP002.8-RT Rectangle Tank – Flat Bottom | 2.8 gal. | CLD 23 | MLTPL | |
SPBMXX-SQ# Specialty Tank | [2] | CLD 23 | MLTPL | |
SPBMXXXX-RT Specialty Tank | [2] | CLD 23 | MLTPL | |
SPXXXX-RT Total Drain Rectangular Tank | [2] | CLD 23 | MLTPL | |
SPXXXX-SQ# Specialty Tank | [2] | CLD 23 | MLTPL | |
SPXXXX-UU Rectangle Tank | [2] | CLD 23 | MLTPL | |
SPXXXX-UU Specialty Tank | [2] | CLD 23 | MLTPL | |
SPXXXX-VM Applicator Tank | [2] | CLD 23 | MLTPL | |
SPXXXXX-UU Utility Tank | [2] | CLD 23 | MLTPL | |
SSPUXXXX-70 Pickup Tank | [2] | CLD 23 | MLTPL | |
VTXXXX-YY Batch Tank- Vertical | [2] | CLD 23 | MLTPL | |
VTXXXXX-YYY | [2] | CLD 23 | MLTPL | |
VTXXXXX-YYYY Vertical Polyethylene Storage Tank | [2] | CLD 23 | MLTPL | |
WOXXXX-VT Water Only Tank | [2] | CLD 23 | MLTPL | |
[1] Certified for the following tank/component combinations: 3/4" fittings/fitting gaskets shall only be used with tanks greater than or equal to 2.8 gallons. 1" fittings/fitting gaskets shall only be used with tanks greater than or equal to 3 gallons. 1-1/4" and 1-1/2" fittings/fitting gaskets shall only be used with tanks greater than or equal to 4 gallons. 2" fittings/fitting gaskets shall only be used with tanks greater than or equal to 5 gallons. 3" fittings/fitting gaskets shall only be used with tanks greater than or equal to 95 gallons. Siphon tubes shall only be used with tanks greater than or equal to 5 gallons.[2] The trade names include product information represented by alphanumeric code, denoted as follows: XXXX, XXXXX, XXXXXX: Tank volume in gallons (2.8 gallons and greater) YY, YYY, YYYY diameter/width of tank in inches QQ: Customer code Z: Can be S (sump) or W (no sump) UU: Can be RT (Rectangular Tank), SQ (Square Tank), 2P (2in lid), 5N (5 in lid), or any other two alphabetical code (customer code) VVVVV: Part number #: Lid size in inches. |
Action Technology | |
10610 State Highway 10 | |
Clinton, IL 61727 | |
United States | |
217-935-1066 |
Facility : Clinton, IL
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Tubing/Hose | ||||
AT Alpha PE Series | .17" - .5" | D. HOT | PE |
AdEdge Technologies, Inc. | |
5152 Belle Wood Court | |
Suites A | |
Burford, GA 30518 | |
United States | |
678-835-0052 |
Facility : Quincy, IL
Process Media
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Oxidative Media | ||||
AD26 | [1] | CLD 23 | MNDOX | |
[1] Certified for the following mesh sizes: 8 x 20, 20 x 40. |
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
Adhesive R&D, Inc. | |
4603 Anderson Drive | |
Eau Claire, WI 54703 | |
United States | |
715-832-4557 | |
Visit this company's website |
Facility : Eau Claire, WI
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Thread Compounds | ||||
DFM 555 | [1] | CLD 23 | SLT | |
DFM 63 | [1] | CLD 23 | SLT | |
DFM 64 | [1] | CLD 23 | SLT | |
DFM 65 | [1] | CLD 23 | SLT | |
DFM 66 | [1] | CLD 23 | SLT | |
DFM 67 | [1] | CLD 23 | SLT | |
DFM 68 | [1] | CLD 23 | SLT | |
FMB64 | [1] | CLD 23 | SLT | |
FMB65 | [1] | CLD 23 | SLT | |
FMB66 | [1] | CLD 23 | SLT | |
RubberMAX iPipe 70 | [1] | CLD 23 | SLT | |
RubberMAX iPipe 71 | [1] | CLD 23 | SLT | |
RubberMAX iPipe 72 | [1] | CLD 23 | SLT | |
RubberMAX iPipe 73 | [1] | CLD 23 | SLT | |
[1] Certified for a maximum of 18.5 joints per liter. |
Advance Products & Systems | |
108 Asset Avenue | |
Scott, LA 70583 | |
United States | |
800-315-6009 | |
337-233-6116 | |
Visit this company's website |
Facility : Scott, LA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Dielectric Insulator[1] | ||||
Trojan G-10, Type ET | 1/2" - 160" | D. HOT | MLTPL | |
Trojan G-10, Type FT | 1/2" - 160" | D. HOT | MLTPL | |
[1] Certified for 1/8" thick flange insulating gaskets. |
Advanced Technology Products | |
12740 State Route 4 | |
P.O. Box 335 | |
Milford Center, OH 43045 | |
United States | |
937-349-4055 | |
Visit this company's website |
Facility : Milford Center, OH
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Tubing | ||||
Imbibe™ LLDPE Tubing[1] | [2] | D. HOT | PE | |
[1] Certified for the following tubing colors: Black Blue Green Natural Red White Yellow[2] Certified for the following sizes: 5/32 " - 1" 4 mm - 16 mm |
AERCO International | |
100 Oritani Drive | |
Blauvelt, NY 10913 | |
United States | |
845-580-8000 | |
Visit this company's website |
Facility : # 1 USA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Valves[G] | ||||
ADMS200 | 2" | C. HOT | MLTPL | |
DigiTemp Sr. ADMS150 | 1 1/2" | C. HOT | MLTPL | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Franklin, NH
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Valves[G] | ||||
DigiTemp Jr. V23NN | 3/4" | C. HOT | MLTPL | |
DigiTemp Jr. V55NN | 1" | C. HOT | MLTPL | |
DigiTemp Jr. V71NN | 1 1/2" | C. HOT | MLTPL | |
DigiTemp Jr. V125NN | 2" | C. HOT | MLTPL | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Agru America, Inc. | |
500 Garrison Road | |
Georgetown, SC 29440 | |
United States | |
834-546-0600 | |
Visit this company's website |
Facility : # 2 Andrews
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings | ||||
IPS Elbow 45° | 3/4" - 18" | CLD 23 | PE | |
IPS Elbow 90° | 3/4" - 18" | CLD 23 | PE | |
IPS End Cap | 3/4" - 18" | CLD 23 | PE | |
IPS Flange Adaptor | 3/4" - 18" | CLD 23 | PE | |
IPS Reducer | 2" x 1 ½"-12" x 10" | CLD 23 | PE | |
IPS Tee | 3/4" - 18" | CLD 23 | PE |
Facility : Charleston, SC
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe[1][G] | ||||
AGRULINE° HDPE PIPE | 24" - 138" | CLD 23 | HDPE | |
[1] Certified also for metric sizes: 609 mm - 3500 mm.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Akron Porcelain & Plastics Company | |
2739 Cory Avenue | |
Akron, OH 44314-0157 | |
United States | |
330-745-2159 |
Facility : Akron, OH
Process Media
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Filtration Media | ||||
Porcelain Spheres | >= 1 1/4" diameter | CLD 23 | CERAM |
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
Akzo Nobel Coatings Inc. | |
P.O. Box 91629 | |
Cleveland, OH 44101 | |
United States | |
216-750-6475 |
Facility : Warsaw, IN
Protective (Barrier) Materials
Water | Water | |||
Water Contact | Contact | Contact | ||
Trade Designation | Size Restriction | Temp | Material | |
Coatings - Pipe[1] | ||||
HA000Q INT 100 White Primer | >= 6" | CLD 23 | PEC | |
HL001QF Interpon 100 Duracoat Grey | >= 6" | CLD 23 | PEC | |
HM001QF INT100 16452 Tarsco Tan | >= 6" | CLD 23 | PEC | |
[1] Number of Coats: 1-2 Maximum Field Use Dry Film Thickness (in mils): 10 Final Cure Time and Temperature: 15 minutes at 350°F | ||||
Coatings - Tank[1] | ||||
HA000Q INT 100 White Primer | >= 4000 gal. | CLD 23 | PEC | |
HL001QF Interpon 100 Duracoat Grey | >= 4000 gal. | CLD 23 | PEC | |
HM001QF INT100 16452 Tarsco Tan | >= 4000 gal. | CLD 23 | PEC | |
[1] Number of Coats: 1-2 Maximum Field Use Dry Film Thickness (in mils): 10 Final Cure Time and Temperature: 15 minutes at 350°F |
Facility : Nashville, TN
Protective (Barrier) Materials
Water | Water | |||
Water Contact | Contact | Contact | ||
Trade Designation | Size Restriction | Temp | Material | |
Coatings - Fittings | ||||
HAF09R Resicoat R4-ES White[1] | >= 1" | D. HOT | PEC | |
HEF22R Resicoat R4-ES Yellow[1] | >= 1" | D. HOT | PEC | |
HGC17R Resicoat R4-FB Red[2] | >= 1" | D. HOT | PEC | |
HGF17R Resicoat R4-ES Rust[3] | >= 1" | D. HOT | PEC | |
HJ606R Resicoat R4-ES Blue[1] | >= 1" | D. HOT | PEC | |
HJC08R Resicoat R4-FB Blue[4] | >= 1" | D. HOT | PEC | |
HJF10R Resicoat R4-ES RAL5017 Blue[1] | >= 1" | D. HOT | PEC | |
HJF14R Resicoat R4-ES RAL5015 Blue[1] | >= 1" | D. HOT | PEC | |
HJF24R Resicoat R4-ES Blue[5] | >= 1" | D. HOT | PEC | |
HJF42R Resicoat R4-ES Blue[1] | >= 1" | D. HOT | PEC | |
HJF4BR Resicoat R4-ES Blue[1] | >= 1" | D. HOT | PEC | |
HJF99R Resicoat R4-ES RAL5009 Blue[1] | >= 1" | D. HOT | PEC | |
HKF47R Resicoat R4-ES Green[6] | >= 1" | D. HOT | PEC | |
HNF24R Resicoat R4-ES Black[3] | >= 1" | D. HOT | PEC | |
Resicoat R4-ES HGF38R[7] | >= 1" | D. HOT | PEC | |
[1] Colors: Blue, white, yellow Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Maximum Thinner: None Final Cure: 20 minutes at 428°F[2] Colors: Red Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 20 minutes at 220°C Special Comments: Preheat at 200°C - 230°C[3] Colors: Black, rust Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 20 minutes at 428°F[4] Colors: Blue Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Recoat Cure Time and Temperature: 20 minutes at 220°C Special Comments: Pre-heat at 200°C - 230°C[5] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 20 minutes at 428°F Special Comments: Self curing on 8 mm or heavier steel at 392°F - 428°F metal temperature.[6] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 35 Final Cure Time and Temperature: 455°F metal temperature and post cured for 10 minutes at 455°F Special Comments: Metal plates are pre-heated to 455°F and sprayed while hot. Plates are then post cured for 10 minutes at 455°F.[7] Colors: Red brown Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Maximum Thinner: None Final Cure Time and Temperature: 20 minutes at 428ºF | ||||
Coatings - Pipe | ||||
AD139QF Interpon 100 Tank Tan[8] | >= 6" | CLD 23 | PEC | |
HA000Q Interpon 100 White Primer[9] | >= 1/2" | CLD 23 | PEC | |
HKF47R Resicoat R4-ES Green[6] | >= 1/2" | D. HOT | PEC | |
HL001QF Interpon 100 Duracoat Grey[9] | >= 1/2" | CLD 23 | PEC | |
[6] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 35 Final Cure Time and Temperature: 455°F metal temperature and post cured for 10 minutes at 455°F Special Comments: Metal plates are pre-heated to 455°F and sprayed while hot. Plates are then post cured for 10 minutes at 455°F.[8] Number of Coats: 1 Maximum Field Use Dry Thickness: 10 mils Final Cure Time/Temperature: 10 minutes at 400°F[9] Colors: White, Grey Number of Coats: 1 Maximum field use dry film thickness (in mils): 10 Final cure time and temperature: 15 minutes at 350° F | ||||
Coatings - Tank | ||||
AD139QF Interpon 100 Tank Tan[8] | >= 4000 gal. | CLD 23 | PEC | |
HA000Q Interpon 100 White Primer[9] | >= 4000 gal. | CLD 23 | PEC | |
HL001QF Interpon 100 Duracoat Grey[9] | >= 4000 gal. | CLD 23 | PEC | |
[8] Number of Coats: 1 Maximum Field Use Dry Thickness: 10 mils Final Cure Time/Temperature: 10 minutes at 400°F[9] Colors: White, Grey Number of Coats: 1 Maximum field use dry film thickness (in mils): 10 Final cure time and temperature: 15 minutes at 350° F | ||||
Coatings - Valve | ||||
HAF09R Resicoat R4-ES White[1] | >= 1" | D. HOT | PEC | |
HEF22R Resicoat R4-ES Yellow[1] | >= 1" | D. HOT | PEC | |
HGC17R Resicoat R4-FB Red[2] | >= 1" | D. HOT | PEC | |
HGF17R Resicoat R4-ES Rust[3] | >= 1" | D. HOT | PEC | |
HJ606R Resicoat R4-ES Blue[1] | >= 1" | D. HOT | PEC | |
HJC08R Resicoat R4-FB Blue[4] | >= 1" | D. HOT | PEC | |
HJF10R Resicoat R4-ES RAL5017 Blue[1] | >= 1" | D. HOT | PEC | |
HJF14R Resicoat R4-ES RAL5015 Blue[1] | >= 1" | D. HOT | PEC | |
HJF24R Resicoat R4-ES Blue[5] | >= 1" | D. HOT | PEC | |
HJF42R Resicoat R4-ES Blue[1] | >= 1" | D. HOT | PEC | |
HJF4BR Resicoat R4-ES Blue[1] | >= 1" | D. HOT | PEC | |
HJF99R Resicoat R4-ES RAL5009 Blue[1] | >= 1" | D. HOT | PEC | |
HKF47R Resicoat R4-ES Green[6] | >= 1" | D. HOT | PEC | |
HNF24R Resicoat R4-ES Black[3] | >= 1" | D. HOT | PEC | |
Resicoat R4-ES HGF38R[7] | >= 1" | D. HOT | PEC | |
[1] Colors: Blue, white, yellow Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Maximum Thinner: None Final Cure: 20 minutes at 428°F[2] Colors: Red Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 20 minutes at 220°C Special Comments: Preheat at 200°C - 230°C[3] Colors: Black, rust Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 20 minutes at 428°F[4] Colors: Blue Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Recoat Cure Time and Temperature: 20 minutes at 220°C Special Comments: Pre-heat at 200°C - 230°C[5] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 20 minutes at 428°F Special Comments: Self curing on 8 mm or heavier steel at 392°F - 428°F metal temperature.[6] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 35 Final Cure Time and Temperature: 455°F metal temperature and post cured for 10 minutes at 455°F Special Comments: Metal plates are pre-heated to 455°F and sprayed while hot. Plates are then post cured for 10 minutes at 455°F.[7] Colors: Red brown Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Maximum Thinner: None Final Cure Time and Temperature: 20 minutes at 428ºF |
Akzo Nobel Coatings, Inc. | |
Flying Hills Corporate Center | |
3 Commerce Drive | |
Reading, PA 19607 | |
United States | |
610-775-6600 |
Facility : Reading, PA
Protective (Barrier) Materials
Water | Water | |||
Water Contact | Contact | Contact | ||
Trade Designation | Size Restriction | Temp | Material | |
Coatings - Fittings | ||||
AA119QF INTERPON 100 10-1160 JERSEY CREAM[1] | >= 2" | CLD 23 | PEC | |
AM106QF INTERPON 100 10-4081 RED BROWN[3] | >= 2" | CLD 23 | PEC | |
HAF06QF RESICOAT R4-ES 10-1161 WHITE[4] | >= 2" | CLD 23 | PEC | |
HNF12QF RESICOAT R4-ES 10-7314 BLACK[5] | >= 1/2" | CLD 23 | PEC | |
HNF13QF RESICOAT PI 76-7001 BLACK[2] | >= 1" | D. HOT | NP | |
[1] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 15 minutes at 350°F Special Comments: Preheat substrate to 350° F.[2] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 18 Final Cure Time and Temperature:: 1 minute at 475ºF Special Comments: Preheat panel to 650ºF before coating[3] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 16 Special Comments: Preheat part before powder application to 350°F for 20 minutes. Post heat to 350°F for 15 minutes.[4] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 15 Maximum Thinner: None Final Cure Time and Temperature: 20 minutes at 350°F Special Comments: Preheat substrate to 350°F[5] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 16 Special Comments: Preheat part before powder application to 350°F for 20 minutes. Post heat part to 350°F for 20 minutes. | ||||
Coatings - Pipe | ||||
AA119QF INTERPON 100 10-1160 JERSEY CREAM[1] | >= 2" | CLD 23 | PEC | |
AM106QF INTERPON 100 10-4081 RED BROWN[3] | >= 2" | CLD 23 | PEC | |
HAF06QF RESICOAT R4-ES 10-1161 WHITE[4] | >= 2" | CLD 23 | PEC | |
HNF12QF RESICOAT R4-ES 10-7314 BLACK[5] | >= 1/2" | CLD 23 | PEC | |
HNF13QF RESICOAT PI 76-7001 BLACK[2] | >= 18" | D. HOT | NP | |
[1] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 15 minutes at 350°F Special Comments: Preheat substrate to 350° F.[2] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 18 Final Cure Time and Temperature:: 1 minute at 475ºF Special Comments: Preheat panel to 650ºF before coating[3] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 16 Special Comments: Preheat part before powder application to 350°F for 20 minutes. Post heat to 350°F for 15 minutes.[4] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 15 Maximum Thinner: None Final Cure Time and Temperature: 20 minutes at 350°F Special Comments: Preheat substrate to 350°F[5] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 16 Special Comments: Preheat part before powder application to 350°F for 20 minutes. Post heat part to 350°F for 20 minutes. | ||||
Coatings - Tank | ||||
AA119QF INTERPON 100 10-1160 JERSEY CREAM[1] | >= 5 gal. | CLD 23 | PEC | |
AM106QF INTERPON 100 10-4081 RED BROWN[3] | >= 5 gal. | CLD 23 | PEC | |
HAF06QF RESICOAT R4-ES 10-1161 WHITE[4] | >= 5 gal. | CLD 23 | PEC | |
HLF93QF RESICOAT R4-ES 10-7208 GRAY[3] | >= 5 gal. | CLD 23 | PEC | |
HNF12QF RESICOAT R4-ES 10-7314 BLACK[5] | >= 5 gal. | CLD 23 | PEC | |
HNF13QF RESICOAT PI 76-7001 BLACK[2] | >= 300 gal. | D. HOT | NP | |
[1] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 15 minutes at 350°F Special Comments: Preheat substrate to 350° F.[2] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 18 Final Cure Time and Temperature:: 1 minute at 475ºF Special Comments: Preheat panel to 650ºF before coating[3] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 16 Special Comments: Preheat part before powder application to 350°F for 20 minutes. Post heat to 350°F for 15 minutes.[4] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 15 Maximum Thinner: None Final Cure Time and Temperature: 20 minutes at 350°F Special Comments: Preheat substrate to 350°F[5] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 16 Special Comments: Preheat part before powder application to 350°F for 20 minutes. Post heat part to 350°F for 20 minutes. | ||||
Coatings - Valve | ||||
AA119QF INTERPON 100 10-1160 JERSEY CREAM[1] | >= 2" | CLD 23 | PEC | |
HAF06QF RESICOAT R4-ES 10-1161 WHITE[4] | >= 2" | CLD 23 | PEC | |
HNF12QF RESICOAT R4-ES 10-7314 BLACK[5] | >= 1/2" | CLD 23 | PEC | |
HNF13QF RESICOAT PI 76-7001 BLACK[2] | >= 4" | D. HOT | NP | |
[1] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 15 minutes at 350°F Special Comments: Preheat substrate to 350° F.[2] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 18 Final Cure Time and Temperature:: 1 minute at 475ºF Special Comments: Preheat panel to 650ºF before coating[4] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 15 Maximum Thinner: None Final Cure Time and Temperature: 20 minutes at 350°F Special Comments: Preheat substrate to 350°F[5] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 16 Special Comments: Preheat part before powder application to 350°F for 20 minutes. Post heat part to 350°F for 20 minutes. |
Alar Chemical Sales, Inc. | |
9651 196th Street | |
Mokena, IL 60448 | |
United States | |
708-479-6100 | |
Visit this company's website |
Facility : # 1 USA
Process Media
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Diatomaceous Earth[1] | ||||
FA-140-F | 1 um - 200 um | CLD 23 | DE | |
[1] Certified for a maximum use level of 5,000 mg/L. |
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
Allchem Performance Products | |
416 South Main Street | |
Corsicana, TX 75110 | |
United States | |
903-872-9997 |
Facility : Corsicana, TX
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Chemical Feeders[1] | ||||
Horizon PCF-60 | [2] | CLD 23 | MLTPL | |
Horizon PTF-100 | [3] | CLD 23 | MLTPL | |
Horizon PTF-250 | [3] | CLD 23 | MLTPL | |
Horizon PTF-60 | [3] | CLD 23 | MLTPL | |
[1] Certification of this product has been performed to the health effects requirements of NSF/ANSI/CAN 61, which assesses the acceptability of potential extractants from the chemical feeder when used with the manufacturer's recommended use chemicals. Any modifications including the use of chemicals other than those recommended by the manufacturer and chemicals that are not compliant to NSF/ANSI/CAN 60 will void the NSF Certification for this feeder.[2] Horizon PCF-60 is Certified for a maximum 0.2% calcium hypochlorite solution added to drinking water to effect a maximum use level (MUL) of 10 ppm total chlorine, with a minimum of 47,500 gallons of water treated per day.[3] Horizon PTF-60, Horizon PTF-100, and Horizon PTF-250 are Certified for a maximum 0.11% trichloroisocyanurate solution added to drinking water to effect a maximum use level (MUL) of 10 ppm total chlorine, with a minimum of 18,000 gallons of water treated per day. |
Allied Group | |
7200 Mykawa Road | |
Houston, TX 77033 | |
United States | |
713-799-1100 | |
Visit this company's website |
Facility : Houston, TX
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings | ||||
Fittings | [1][2][3] | CLD 23 | SS | |
[1] Fittings can be welded or seamless, and come in the following configurations and corresponding sizes: - 3R Elbow: 90°, 60°, 45°, 30°. - 90° and 45°: 3/4" - 60" - 60° and 30°: 16"-60" - Long Radius Elbow: 90°C and 45°. All 1/2" - 60". - Long Radius Return: 1/2" - 24". - Short Radius Elbow: 1" – 24" - Short radius 180° Return: 1" – 24" - Long Radius Reducing Elbow: 2" x 1 1/2" – 24" x 12" - Tee: 1/2" - 60" - Cross: 1/2" - 60" - Reducing Tee: 1/2" x 1/2" x 3/8" – 60" x 60" x 30" - Concentric Reducer: 3/4" x 1/2" – 60" x 30" - Eccentric Reducer: 3/4" x 1/2" – 60" x 30" - Cap: 1/2" - 60" - Stub Ends: 1/2" - 60"[2] Forged and cast fittings can come in the following configurations and corresponding sizes: - Cross: 1/8" – 4" - Tee: 1/8" – 4" - 90° Elbow: 1/8" – 4" - 45° Elbow: 1/8" – 4" - Coupling: 1/8" – 4" - Half-coupling: 1/8" – 4" - Boss: 1/8" – 4" - Cap: 1/8" – 4" - Couplet: 1/8" – 4" - Threaded Street Elbows: 1/8" – 2" - Square head plug: 1/8" – 4" - Hex head plug: 1/8" – 4" - Round head plug: 1/8" – 4" - Hex head bushing: 1/8" – 4" - Flush bushing: 1/8" – 4"[3] Flanges come in the following configurations and range in 0.5-96" diameter: - Threaded - Slip-on - Socket weld - Lap joint - Blind - Welding neck | ||||
Pipe | ||||
Seamless Pipe | 1/2" - 96" | CLD 23 | SS |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Facility : Missouri City, TX
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe | ||||
Seamless Pipe | 1/2" - 96" | CLD 23 | SS | |
Fittings | ||||
Fittings | [1][2][3] | CLD 23 | SS | |
[1] Fittings can be welded or seamless, and come in the following configurations and corresponding sizes: - 3R Elbow: 90°, 60°, 45°, 30°. - 90° and 45°: 3/4" - 60" - 60° and 30°: 16"-60" - Long Radius Elbow: 90°C and 45°. All 1/2" - 60". - Long Radius Return: 1/2" - 24". - Short Radius Elbow: 1" – 24" - Short radius 180° Return: 1" – 24" - Long Radius Reducing Elbow: 2" x 1 1/2" – 24" x 12" - Tee: 1/2" - 60" - Cross: 1/2" - 60" - Reducing Tee: 1/2" x 1/2" x 3/8" – 60" x 60" x 30" - Concentric Reducer: 3/4" x 1/2" – 60" x 30" - Eccentric Reducer: 3/4" x 1/2" – 60" x 30" - Cap: 1/2" - 60" - Stub Ends: 1/2" - 60"[2] Forged and cast fittings can come in the following configurations and corresponding sizes: - Cross: 1/8" – 4" - Tee: 1/8" – 4" - 90° Elbow: 1/8" – 4" - 45° Elbow: 1/8" – 4" - Coupling: 1/8" – 4" - Half-coupling: 1/8" – 4" - Boss: 1/8" – 4" - Cap: 1/8" – 4" - Couplet: 1/8" – 4" - Threaded Street Elbows: 1/8" – 2" - Square head plug: 1/8" – 4" - Hex head plug: 1/8" – 4" - Round head plug: 1/8" – 4" - Hex head bushing: 1/8" – 4" - Flush bushing: 1/8" – 4"[3] Flanges come in the following configurations and range in 0.5-96" diameter: - Threaded - Slip-on - Socket weld - Lap joint - Blind - Welding neck |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Alloy Machine Works, Inc. | |
18102 East Hardy Road | |
Houston, TX 77073 | |
United States | |
800-577-5068 | |
281-233-0214 |
Facility : Houston, TX
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Well Screens[1][G] | ||||
AMW Stainless Steel Wire Wrapped Well Screen | 1.25" - 24" | CLD 23 | SS | |
[1] All well screens 1.25" – 5" are Certified for a minimum daily flow of 450 L. All well screen 6" - 24" are Certified for minimum daily flow of 136,000 L.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Alyan Pump | |
930 Henderson Boulevard | |
Folcroft, PA 19032-1807 | |
United States | |
610-583-1883 | |
Visit this company's website |
Facility : Folcroft, PA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pumps[G] | ||||
VSPM-ES-2 (Duplex) | 2" - 6" | CLD 23 | MLTPL | |
VSPM-ES-3 (Triplex) | 2" - 6" | CLD 23 | MLTPL | |
VSPM-ES-4 (Quadplex) | 2" - 6" | CLD 23 | MLTPL | |
VSPM-MS-2 (Duplex) | 2" - 6" | CLD 23 | MLTPL | |
VSPM-MS-3 (Triplex) | 2" - 6" | CLD 23 | MLTPL | |
VSPM-MS-4 (Quadplex) | 2" - 6" | CLD 23 | MLTPL | |
VSPP-ES-1 (Simplex) | 1 1/4" - 6" | CLD 23 | MLTPL | |
VSPP-MS-1 (Simplex) | 1 1/4" - 6" | CLD 23 | MLTPL | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Amaltech, Inc. | |
30670 Bainbridge Road | |
Solon, OH 44139 | |
United States | |
440-248-7500 | |
Visit this company's website |
Facility : # 1 USA
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Lubricants | ||||
Nepro | >= 1/2" | CLD 23 | LUB | |
VSL35-2 | >= 1/2" | CLD 23 | LUB |
American AVK | |
2155 Meridian Boulevard | |
Minden, NV 89423 | |
United States | |
775-552-1400 | |
Visit this company's website |
Facility : Minden, NV
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fire Hydrants[G] | ||||
AVK Series 24XX Wet Barrel Fire Hydrant - Ductile Iron[1] | 6" | CLD 23 | MLTPL | |
AVK Series 24XX Wet Barrel Fire Hydrant - Stainless Steel[1] | 6" | CLD 23 | MLTPL | |
Series 27XX Dry Barrel Fire Hydrants[2] | 4" - 8" | CLD 23 | MLTPL | |
Series 67 Post Hydrant | 2" - 4" | CLD 23 | MLTPL | |
[1] AVK Order Codes for XX: Ductile Iron Hydrants 10 - 2 x Hose + 1 x Pumper outlets, flanged with 4" ANSI B16.42 Monitor Flange drilled to ANSI B16.42 Class 150 20 - 1 x Hose + 2 x Pumper outlets, flanged. 23 - 1 x Hose + 2 x Pumper outlets, flanged with San Diego drilling 30 - 1 x Hose + 1 x Pumper outlet, with 6" NPT thread, UL 40 - 1 x Hose + 1 x Pumper outlet, flanged, UL 60 - 1 x Hose + 1 x Pumper outlet, with 6" NPT thread, UL and FM 70 - 1 x Hose + 1 x Pumper outlet, flanged, UL and FM 72 - EBMUD Hydrant 73 - 1 x Hose + 1 x Pumper outlet, flanged, UL and FM, San Diego drilling 74 - 1 x Hose + 1 x Pumper outlet, flanged, UL (FM removed) 75 - 1 x Hose + 1 x Pumper outlet, flanged, UL (FM removed, San Diego drilling) 76 - EBMUD Hydrant with San Diego drilling 87 - 2 x Threaded hose + 1 Threaded pumper outlet, UL and FM, San Diego Drilling 90 - 2 x Hose + 1 x Pumper outlet, flanged, UL and FM 91 - Three outlets (2 x 2 1/2" - 1 x 4”/4 1/2") 92 - 2 x Treaded hose + 1 Threaded pumper outlet, UL and FM 93 - 2 x Hose + 1 x Pumper outlet, flanged, UL and FM, San Diego drilling 94 - 2 x Hose + 1 x Pumper outlet, flanged, UL (FM removed) 95 - 2 x Hose + 1 x Pumper outlet, flanged, UL (FM removed, San Diego drilling) 96 - 2 x Hose + 1 x Pumper outlet, UL and FM, ANSI B16.1 Class 125 drilling Stainless Steel Hydrants 42 - Stainless steel 1 x Hose + 1 x pumper 43 - Stainless steel 1 x Hose + 1 x pumper, flanged with San Diego drilling 44 - Stainless steel 1 x Hose + 1 x pumper, flanged with 8 bolt drilling to ANSI B16.1, class 125 50 - 2 x Hose + 1 x Pumper outlet, flanged, UL and FM 52 - Stainless steel 2 x Hose + 1 x pumper. 53 - Stainless steel 2 x Hose + 1 x pumper, flanged with San Diego drilling 54 - Stainless steel 2 x Hose + 1 x pumper, flanged with 8 bolt drilling to ANSI B16.1, class 125 Certified hydrants use NBR valve discs and o-rings. Acceptable order codes for interior coating are 00, 01, 03, 08, 13, 29 and 53.[2] XX refers to non-wetted characteristics of the hydrant and may be any value.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Valves[G] | ||||
AVK Series 25/11 NRS GroovexGroove Gate Valve | 2 1/2" - 10" | CLD 23 | MLTPL | |
AVK Series 25/16 OS&Y GroovexGroove Gate Valve | 2 1/2" - 10" | CLD 23 | MLTPL | |
AVK Series 25/21 NRS GroovexFLange Gate Valve | 2 1/2" - 10" | CLD 23 | MLTPL | |
AVK Series 25/26 OS&Y GroovexFLange Gate Valve | 2 1/2" - 10" | CLD 23 | MLTPL | |
AVK Series 25/41 NRS GroovexFLange Gate Valve | 2 1/2" - 10" | CLD 23 | MLTPL | |
AVK Series 25/46 OS&Y FlangexFlange Gate Valve | 2 1/2" - 10" | CLD 23 | MLTPL | |
FlowGuard II® 2488X Wet Barrel Hydrant Check Valve[4] | 6" | CLD 23 | MLTPL | |
S816 Butterfly Valve; FL x FL | 3" - 24" | CLD 23 | MLTPL | |
S816 Butterfly Valve; MJ x FL | 6" - 24" | CLD 23 | MLTPL | |
S816 Butterfly Valve; MJ x MJ | 4"- 24" | CLD 23 | MLTPL | |
S816 Butterfly Valve; Wafer | 3" - 24" | CLD 23 | MLTPL | |
Series 41 Swing Check Valve[5] | 3" - 12" | CLD 23 | MLTPL | |
Valves 27-160-9176(Y)(XX)-05[3] | 6" | CLD 23 | MLTPL | |
[3] Valves 27-160-9176(Y)(XX)-05: Y - Bolting Material 1 - 316 bolting 3 - 304 bolting XX - Description of non-wetted options 29 – Valspar Red Oxide. Int. and ext. 34 – Valspar Red Oxide. Holiday free Int. and no holiday free ext. 35 – Valspar Red Oxide. Holiday free Int. and holiday free ext. 87 – Valspar Red Oxide. Int. and Polyurethan ext. 88 – Valspar Red Oxide. Holiday free Int. and Polyurethan ext. Where YXX can be 129, 134, 135, 187, 188, 329, 334, 335, 387, 388[4] Acceptable order codes for interior coating are 00, 01, 03, 08, 13, 29 and 53.[5] Certified for resilient seat to epoxy coated ductile iron seat. Certified for valves with no external actuation, lever and spring actuation, and lever and weight actuation.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
American Cast Iron Pipe Company | |
1501 North 31st Avenue | |
Birmingham, AL 35207 | |
United States | |
205-325-8971 | |
Visit this company's website |
Facility : # 1 Birmingham, AL
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Ductile Iron Fitting[1][2][G] | ||||
American Cast Iron Fittings | 4" - 64" | CLD 23 | ASPH | |
American Cast Iron Fittings | 4" - 64" | CLD 23 | CMNT | |
American Ductile Iron Fittings | 4" - 64" | CLD 23 | ASPH | |
American Ductile Iron Fittings | 4" - 64" | CLD 23 | CMNT | |
American Earthquake Joint System (EQ) | 6" - 42" | CLD 23 | ASPH | |
American Earthquake Joint System (EQ) | 6" - 42" | CLD 23 | CMNT | |
American Fastite® Fittings (FST) | 4" - 64" | CLD 23 | CMNT | |
American Fastite® Fittings (FST) | 4" - 64" | CLD 23 | ASPH | |
American Flanged Fittings (FL) | 4" - 64" | CLD 23 | CMNT | |
American Flanged Fittings (FL) | 4" - 64" | CLD 23 | ASPH | |
American Flex-Ring® Joint Fittings (FRE) | 4" - 64" | CLD 23 | ASPH | |
American Flex-Ring® Joint Fittings (FRE) | 4" - 64" | CLD 23 | CMNT | |
American Grooved Joint Fittings | 4" - 64" | CLD 23 | ASPH | |
American Grooved Joint Fittings | 4" - 64" | CLD 23 | CMNT | |
American Lok-Fast® Joint Fittings | 4" - 64" | CLD 23 | CMNT | |
American Lok-Fast® Joint Fittings | 4" - 64" | CLD 23 | ASPH | |
American Lok-Ring® Joint Fittings (LKR) | 4" - 64" | CLD 23 | CMNT | |
American Lok-Ring® Joint Fittings (LKR) | 4" - 64" | CLD 23 | ASPH | |
American Mechanical Joint Fittings (MJ) | 4" - 64" | CLD 23 | CMNT | |
American Mechanical Joint Fittings (MJ) | 4" - 64" | CLD 23 | ASPH | |
American Mechanical Joint Fittings-Retainer Gland (MJ) | 4" - 64" | CLD 23 | ASPH | |
American Mechanical Joint Fittings-Retainer Gland (MJ) | 4" - 64" | CLD 23 | CMNT | |
American Shouldered Joint Fittings | 4" - 64" | CLD 23 | ASPH | |
American Shouldered Joint Fittings | 4" - 64" | CLD 23 | CMNT | |
American Specials Fittings | 4" - 64" | CLD 23 | ASPH | |
American Specials Fittings | 4" - 64" | CLD 23 | CMNT | |
American Threaded Joint Fittings | 4" - 64" | CLD 23 | ASPH | |
American Threaded Joint Fittings | 4" - 64" | CLD 23 | CMNT | |
[1] Products also Certified for 100 mm - 1600 mm.[2] Certification is for all fittings configurations in any combination.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Ductile Iron Pipe[G] | ||||
American Ductile Iron Pipe[1] | 4" - 64" | CLD 23 | CMNT | |
American Ductile Iron Pipe[1] | 4" - 64" | CLD 23 | ASPH | |
American Fastite® Joint Pipe (FST)[1] | 4" - 64" | CLD 23 | ASPH | |
American Fastite® Joint Pipe (FST)[1] | 4" - 64" | CLD 23 | CMNT | |
American Flanged Pipe[1] | 4" - 64" | CLD 23 | ASPH | |
American Flanged Pipe[1] | 4" - 64" | CLD 23 | CMNT | |
American Flex-Lok® Ball Joint Pipe (FLB)[1] | 4" - 64" | CLD 23 | ASPH | |
American Flex-Lok® Ball Joint Pipe (FLB)[1] | 4" - 64" | CLD 23 | CMNT | |
American Flex-Ring® Joint Pipe (FRE)[1] | 4" - 64" | CLD 23 | ASPH | |
American Flex-Ring® Joint Pipe (FRE)[1] | 4" - 64" | CLD 23 | CMNT | |
American Grooved Joint Pipe[1] | 4" - 64" | CLD 23 | CMNT | |
American Grooved Joint Pipe[1] | 4" - 64" | CLD 23 | ASPH | |
American Lok-Fast® Joint Pipe (LKR)[1] | 4" - 64" | CLD 23 | CMNT | |
American Lok-Fast® Joint Pipe (LKR)[1] | 4" - 64" | CLD 23 | ASPH | |
American Lok-Ring® Joint Pipe[1] | 4" - 64" | CLD 23 | ASPH | |
American Lok-Ring® Joint Pipe[1] | 4" - 64" | CLD 23 | CMNT | |
American MJ Coupled Joint Pipe[1] | 4" - 64" | CLD 23 | CMNT | |
American MJ Coupled Joint Pipe[1] | 4" - 64" | CLD 23 | ASPH | |
American Mechanical Joint Pipe (MJ)[1] | 4" - 64" | CLD 23 | CMNT | |
American Mechanical Joint Pipe (MJ)[1] | 4" - 64" | CLD 23 | ASPH | |
American Mechanical Joint Pipe-Retainer Gland (MJ)[1] | 4" - 64" | CLD 23 | ASPH | |
American Mechanical Joint Pipe-Retainer Gland (MJ)[1] | 4" - 64" | CLD 23 | CMNT | |
American Molox® Bolted Ball Joint Pipe[1] | 4" - 64" | CLD 23 | ASPH | |
American Molox® Bolted Ball Joint Pipe[1] | 4" - 64" | CLD 23 | CMNT | |
American Shouldered Joint Pipe[1] | 4" - 64" | CLD 23 | CMNT | |
American Shouldered Joint Pipe[1] | 4" - 64" | CLD 23 | ASPH | |
American Specials Pipe[1][3] | 4" - 64" | CLD 23 | ASPH | |
American Specials Pipe[1][3] | 4" - 64" | CLD 23 | CMNT | |
American Threaded Joint Pipe[1] | 4" - 64" | CLD 23 | CMNT | |
American Threaded Joint Pipe[1] | 4" - 64" | CLD 23 | ASPH | |
Ductile Iron Pipe System for Hot Water[4] | 8" - 64" | D. HOT | MLTPL | |
[1] Products also Certified for 100 mm - 1600 mm.[3] All joint configurations.[4] Ductile Iron Pipe is lined with cement and then seal-coated with asphaltic coating.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
AMERICAN Flow Control | |
1501 North 31st Avenue | |
Birmingham, AL 35207 | |
United States | |
800-326-8051 | |
205-325-7856 | |
Visit this company's website |
Facility : Conway, AR
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Valves[1][2][3][G] | ||||
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) NRS | 14" - 30" | CLD 23 | MLTPL | |
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) OS&Y | 14" - 24" | CLD 23 | MLTPL | |
American Flow Control Series 2500-1 Resilient Wedge Gate Valve (25XX-1) NRS | 2" - 12" | CLD 23 | MLTPL | |
American Flow Control Series 2500-1 Resilient Wedge Gate Valve (25XX-1) OS&Y | 2" - 12" | CLD 23 | MLTPL | |
American Flow Control Series 3500 Resilient Wedge Gate Valve NRS | 4" - 12" | CLD 23 | MLTPL | |
American Flow Control Series 3500 Resilient Wedge Gate Valve OSY | 4" - 12" | CLD 23 | MLTPL | |
[1] XX and YY refer to the size in inches.[2] Certified for use in distribution systems only.[3] 2500 series valves are certified with the following optional connection types: (A) - ALPHA (AX) - ALPHA XL (F) - Flanged (ANSI Class 125) (F2) - Flanged (ANSI Class 250 with raised face) (F3) - Flanged (PN16 with raised face) (F4) - Flanged (PN16 with flat face) (FB) - Flanged (ANSI Class 250 with flat face) (FX) - Flex Ring (MJ) - Mechanical Joint (PO) - Push-on (PVC) – PVC (RF) - Flanged (ANSI Class 150 with raised face) (S) - Threaded (NPT) (TM) - Tapping flanged by mechanical joint (TYT) – Tyton [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : South St. Paul, MN
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fire Hydrants[1][G] | ||||
AMERICAN Waterous Pacer Fire Hydrant (Model W67-250) | 5 1/4" | CLD 23 | MLTPL | |
AMERICAN Waterous Pacer Fire Hydrant (Model W67-350) | 5 1/4" | CLD 23 | MLTPL | |
AMERICAN Waterous Pacer Fire Hydrant (Model WB67-250) | 5 1/4" | CLD 23 | MLTPL | |
AMERICAN Waterous Pacer Fire Hydrant (Model WB67-350) | 5 1/4" | CLD 23 | MLTPL | |
AMERICAN Waterous Trend Fire Hydrant (Model WB77-1) | 4 3/4" | CLD 23 | MLTPL | |
Sequoia Wet Barrel Hydrant PH | 6" | CLD 23 | MLTPL | |
Sequoia Wet Barrel Hydrant PPH/PHH | 6" | CLD 23 | MLTPL | |
[1] Trend and Pacer models are certified with the following optional end connections: - 4 inch mechanical joint - 6 inch mechanical joint - 6 inch mechanical joint for Dallas, Texas - 6 inch Class B mechanical joint - 8 inch mechanical joint - 6 inch flanged - 6 inch flanged with 2 inch NPT pipe plugs - 6 inch Tyton - 6 inch plain end - 6 inch PVC - 6 inch vertical entry - 6 inch vertical entry for Traverse City TVC5 - 6 inch ALPHA - 6 inch ALPHA XL[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Valves[G] | ||||
AMERICAN Waterous Series 6XX Swing Check Valves[2][3] | 3" - 12" | CLD 23 | MLTPL | |
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) NRS[4][5][6] | 14" - 30" | CLD 23 | MLTPL | |
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) OS&Y[4][5][6] | 14" - 24" | CLD 23 | MLTPL | |
American Flow Control Series 2500-1 Resilient Wedge Gate Valve (25XX-1) NRS[4][5][6] | 2" - 12" | CLD 23 | MLTPL | |
American Flow Control Series 2500-1 Resilient Wedge Gate Valve (25XX-1) OS&Y[4][5][6] | 2" - 12" | CLD 23 | MLTPL | |
American Flow Control Series 3500 Resilient Wedge Gate Valve (35YY) NRS[4][5][6] | 4" - 12" | CLD 23 | MLTPL | |
American Flow Control Series 3500 Resilient Wedge Gate Valve (35YY) OSY[4][5][6] | 4" - 12" | CLD 23 | MLTPL | |
CV 2203 | 3" | CLD 23 | MLTPL | |
CV 2210 | 10" | CLD 23 | MLTPL | |
CV 2212 | 12" | CLD 23 | MLTPL | |
CV2204 [7] | 4" | CLD 23 | MLTPL | |
CV2206[7] | 6" | CLD 23 | MLTPL | |
CV2208[7] | 8" | CLD 23 | MLTPL | |
[2] XX refers to size and may be 03, 04, 06, 08, 10 or 12.[3] Certified for standard and outside shaft models.[4] XX and YY refers to the size in inches.[5] Certified for use in distribution systems only.[6] 2500 and 3500 series valves are certified with the following optional connection types: (A) - ALPHA (AX) - ALPHA XL (F) - Flanged (ANSI Class 125) (F2) - Flanged (ANSI Class 250 with raised face) (F3) - Flanged (PN16 with raised face) (F4) - Flanged (PN16 with flat face) (FB) - Flanged (ANSI Class 250 with flat face) (FX) - Flex Ring (MJ) - Mechanical Joint (PO) - Push-on (PVC) – PVC (RF) - Flanged (ANSI Class 150 with raised face) (S) - Threaded (NPT) (TM) - Tapping flanged by mechanical joint (TYT) – Tyton[7] Certified for standard and outside shaft models.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Beaumont, TX
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fire Hydrants[1][2][G] | ||||
American-Darling B-62-B-5 Fire Hydrant | 5.25" | CLD 23 | MLTPL | |
American-Darling B-62-B-BB-5 Fire Hydrant | 5.25" | CLD 23 | MLTPL | |
American-Darling B-84-B-5 Fire Hydrant | 5.25", 6" | CLD 23 | MLTPL | |
American-Darling B-84-B-BB-5 Fire Hydrant | 6" | CLD 23 | MLTPL | |
American-Darling Mark 73-5 (MK73-5) Fire Hydrant | 4.5" | CLD 23 | MLTPL | |
[1] Certification does not include any connection gaskets.[2] All model hydrants are certified with the following optional connection types: - ALPHA - ALPHA XL - Flanged - Flanged (ANSI Class 250 with raised face) - Flanged (ANSI Class 250 with flat face) - Mechanical Joint - Mechanical Joint Plain End - Push-on - Tyton[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Valves[G] | ||||
American Flow Control Series 2100 Resilient Seat Swing Check Valve (21XX)[3][4][5] | 3" - 16" | CLD 23 | MLTPL | |
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) NRS[6][7] | 14" - 66" | CLD 23 | MLTPL | |
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) OS&Y[6][7] | 14" - 24" | CLD 23 | MLTPL | |
American Flow Control Series 2500-1 Resilient Wedge Gate Valve (25XX-1) NRS[6][7] | 4" - 12" | CLD 23 | MLTPL | |
American Flow Control Series 3500 Resilient Wedge Gate Valve (35YY) NRS[6][7] | 4" - 12" | CLD 23 | MLTPL | |
Swing Check Valve - Series 52 SC[8] | 3" - 16" | CLD 23 | MLTPL | |
[3] XX refers to the size of the valve in inches and may be 03, 04, 06, 08, 10, 12, 14, or 16.[4] Certified for use in distribution systems only.[5] 2100 series check valves are certified with the following optional connection types: - Flanged - Mechanical Joint - Mechanical Joint Plain End[6] XX and YY refer to the size in inches.[7] 2500 and 3500 series valves are certified with the following optional connection types: (A) - ALPHA (AX) - ALPHA XL (F) - Flanged (ANSI Class 125) (F2) - Flanged (ANSI Class 250 with raised face) (F3) - Flanged (PN16 with raised face) (F4) - Flanged (PN16 with flat face) (FB) - Flanged (ANSI Class 250 with flat face) (FX) - Flex Ring (MJ) - Mechanical Joint (PO) - Push-on (PVC) – PVC (RF) - Flanged (ANSI Class 150 with raised face) (S) - Threaded (NPT) (TM) - Tapping flanged by mechanical joint (TYT) – Tyton[8] The Swing Check Valve - Series 52 SC may use a "lever and weight" or "lever and spring" option.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
AMERICAN Flow Control | |
1501 31st Avenue North | |
Birmingham, AL 35207 | |
United States | |
800-326-8051 | |
205-325-7856 | |
Visit this company's website |
Facility : Tipp City, OH
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Switches/Sensors | ||||
AFC-20-1004 | N/A | CLD 23 | MLTPL | |
AFC-20-1021 | N/A | CLD 23 | MLTPL | |
AFC-20-1022 | N/A | CLD 23 | MLTPL | |
AFC-20-1023 | N/A | CLD 23 | MLTPL | |
AFC-20-1024 | N/A | CLD 23 | MLTPL | |
AFC-20-1025 | N/A | CLD 23 | MLTPL |
American Polywater Corporation | |
11222 60th Street North | |
Stillwater, MN 55082 | |
United States | |
800-328-9384 | |
651-430-2270 | |
Visit this company's website |
Facility : Stillwater, MN
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Lubricants | ||||
Grand Slam™ Pipe Joint Lubricant Type GSQ-128 | N/A | CLD 23 | LUB | |
Grand Slam™ Pipe Joint Lubricant Type GSQ-128A | N/A | CLD 23 | LUB | |
Grand Slam™ Pipe Joint Lubricant Type GSQ-35 | N/A | CLD 23 | LUB | |
Grand Slam™ Pipe Joint Lubricant Type GSQ-35A | N/A | CLD 23 | LUB | |
Grand Slam™ Pipe Joint Lubricant Type GSQ-448 | N/A | CLD 23 | LUB | |
Grand Slam™ Pipe Joint Lubricant Type GSQ-448A | N/A | CLD 23 | LUB | |
Grand Slam™ Pipe Joint Lubricant Type GSQ-55DRUMA | N/A | CLD 23 | LUB | |
Grand Slam™ Pipe Joint Lubricant Type GSQ-640 | N/A | CLD 23 | LUB | |
Grand Slam™ Pipe Joint Lubricant Type GSQ-640A | N/A | CLD 23 | LUB | |
Grand Slam™ Pipe Joint Lubricant Type Wintergrade Formula GWQ-128 | N/A | CLD 23 | LUB | |
Grand Slam™ Pipe Joint Lubricant Type Wintergrade Formula GWQ-128A | N/A | CLD 23 | LUB | |
Grand Slam™ Pipe Joint Lubricant Type Wintergrade Formula GWQ-35 | N/A | CLD 23 | LUB | |
Grand Slam™ Pipe Joint Lubricant Type Wintergrade Formula GWQ-35A | N/A | CLD 23 | LUB | |
Grand Slam™ Pipe Joint Lubricant Type Wintergrade Formula GWQ-448 | N/A | CLD 23 | LUB | |
Grand Slam™ Pipe Joint Lubricant Type Wintergrade Formula GWQ-448A | N/A | CLD 23 | LUB | |
Grand Slam™ Pipe Joint Lubricant Type Wintergrade Formula GWQ-640 | N/A | CLD 23 | LUB | |
Grand Slam™ Pipe Joint Lubricant Type Wintergrade Formula GWQ-640A | N/A | CLD 23 | LUB |
American Spiralweld Pipe Co., LLC | |
2061 American Italian Way | |
Columbia, SC 29209 | |
United States | |
803-695-2200 |
Facility : Flint, MI
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1][G] | ||||
American | >= 4" | CLD 23 | CMNT | |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Pipe[1][G] | ||||
American | 24" - 120" | CLD 23 | CMNT | |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Columbia, SC
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1][G] | ||||
American | >= 4" | CLD 23 | CMNT | |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Pipe[1][G] | ||||
American | 24" - 120" | CLD 23 | CMNT | |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Paris, TX
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1][G] | ||||
American | >=4" | CLD 23 | CMNT | |
[1] Only products bearing the NSF mark on the product, product packaging, and/or documentation shipped with the product are Certified.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Pipe[1][G] | ||||
American | 24" - 120" | CLD 23 | CMNT | |
[1] Only products bearing the NSF mark on the product, product packaging, and/or documentation shipped with the product are Certified.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
American-Marsh Pumps LLC, A Wilo Company | |
550 East South Street | |
Collierville, TN 38017 | |
United States | |
800-888-7167 | |
901-860-2300 | |
Visit this company's website |
Facility : Collierville, TN
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pumps[1][2][G] | ||||
VTP/OLS/[AA][BB][CC]-[DD] | 6" - 42" | CLD 23 | MLTPL | |
VTP/SC/OLS/[AA][BB][CC]-[DD] | 6" - 42" | CLD 23 | MLTPL | |
[1] Certified for a minimum daily flow of 116,000 L. Certification includes only the open lineshaft configuration.[2] AA - Size of pump in inches (6" - 42") BB - Pump model (D, G, H, I, J, K, L, M, N, W, X, Y, Z, EH, HH) CC - Impeller design (C) DD - Number of stages (1-48) ["C" impeller design indicates "enclosed"][G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Ameriforge | |
13770 Industrial Road | |
Houston, TX 77015 | |
United States | |
713-329-5500 | |
Visit this company's website |
Facility : Houston, TX
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1][G] | ||||
Maass Flange 304 | 1/2" - 96" | C. HOT | SS | |
Maass Flange 316 | 1/2" - 96" | C. HOT | SS | |
[1] Certified for the following configurations: slip on flange, lap joint flange, socket welding flange, orifice flange, threaded flange, blind flange, welding neck flange, and line blanks (spectacle blind, paddle blind, paddle spacers).[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Amerochem Corporation | |
1885 Old Airport Road | |
P.O. Box 3009 | |
New Bern, NC 28564 | |
United States | |
800-990-4949 | |
252-634-9344 |
Facility : New Bern, NC
Process Media
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Powdered Activated Carbon[1][2] | ||||
Activated Carbon Slurry 20% | [3] | CLD 23 | PAC | |
[1] This product is Certified for a maximum use level of 250 mg/L.[2] The carbon source is bituminous coal. Physical state: Liquid[3] Certified for the following mesh sizes: -200 and -325. |
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
Ames Fire & Waterworks, a Watts Regulator Co. | |
1485 Tanforan Avenue | |
Woodland, CA 95776 | |
United States | |
530-666-2493 |
Facility : Woodland, CA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Backflow Preventers[G] | ||||
C200-X-YY-ZZ-TT[1] | 2 1/2" - 10" | CLD 23 | MLTPL | |
C200a-X-YY-ZZ-TT[1] | 2 1/2" - 10" | CLD 23 | MLTPL | |
C400-X-YY-ZZ-TT[1] | 2 1/2" - 10" | CLD 23 | MLTPL | |
C400a-X-YY-ZZ-TT[1] | 2 1/2" - 10" | CLD 23 | MLTPL | |
M200-X-YY-ZZ-TT[1] | 2 1/2" - 10" | CLD 23 | MLTPL | |
M200a-X-YY-ZZ-TT[1] | 2 1/2" - 10" | CLD 23 | MLTPL | |
M400-X-YY-ZZ-TT[1] | 2 1/2" - 10" | CLD 23 | MLTPL | |
M400a-X-YY-ZZ-TT[1] | 2 1/2" - 10" | CLD 23 | MLTPL | |
[1] X - Valve pattern Blank - Straight N - N pattern Z - Z pattern YY - Backflow shutoff designation where 2 per units may be mixed like NRS x PIV BFG - Butterfly valve DNRS - Domestic non-rising stem gate DOSY - Domestic outside stem and yoke gate DPIV - Domestic post indicator gate NRS - Non-rising stem gate OSY - Outside stem and yoke gate PIV - Post indicator gate QT - Quarter turn ball valve ZZ - Inlet and outlet connections Blank - Flange by flange FxG - Flange by groove GxF - Groove by flange GxG - Groove by groove TT - Strainer options Blank - No strainer S - 77F-DI-FDA-125 strainer S - SS Stainless Strainer 8000F[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Valves[2][G] | ||||
605D Series | 3" - 24" | CLD 23 | MLTPL | |
605S Series | 6" - 24" | CLD 23 | MLTPL | |
905D Series | 1 1/4" - 16" | CLD 23 | MLTPL | |
905S Series | 4" - 16" | CLD 23 | MLTPL | |
[2] The following accessories are use with the globe or angle pattern control valve tubing and fittings: Model LFFBV-3C-M1 Ball Valves (1/4" - 1") Figure 60 Flow Clean Strainer (1/4" - 1") 263SS Pressure reducing pilot Mechanical check option Anti-Cavitation trim option[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1][G] | ||||
IBR (X)(Y) | 4" - 12" | CLD 23 | MLTPL | |
IBR2 (X)(Y) | 2" - 3" | CLD 23 | MLTPL | |
[1] May consist of any of below: (X) - Inlet connection GRV - Grooved end CIPS - Cast iron pipe size FLG - Flanged end THR - Thread (Y) - Outlet connection GRV - Grooved end CIPS - Cast iron pipe size FLG - Flanged end THR - Thread[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Fort Worth, TX
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1][G] | ||||
IBR (X)(Y) | 4" - 12" | CLD 23 | MLTPL | |
IBR2 (X)(Y) | 2" - 3" | CLD 23 | MLTPL | |
[1] May consist of any of below: (X) Inlet connection CIPS - Cast Iron Pipe Size FLG - Flanged End GRV - Grooved end THR - Thread (Y) Outlet connection CIPS - Cast Iron Pipe Size FLG - Flanged End GRV - Grooved end THR - Thread[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Ames Fire & Waterworks, a Watts Regulators Co. Division | |
1485 Tanforan Avenue | |
Woodland, CA 95776 | |
United States | |
530-666-2493 |
Facility : Franklin, NH
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Backflow Preventers[G] | ||||
LF2000B-YY-ZZ[2] | 1/2" | CLD 23 | MLTPL | |
LF2000BM1-YY-ZZ[1] | 1" - 2" | CLD 23 | MLTPL | |
LF2000BM2-YY-ZZ[1] | 1 1/4" - 1 1/2" | CLD 23 | MLTPL | |
LF2000BM3-YY-ZZ[1] | 3/4" | CLD 23 | MLTPL | |
LF200B[2] | 1/2" - 2" | CLD 23 | MLTPL | |
LF4000B-YY-ZZ[1] | 1/2" | CLD 23 | MLTPL | |
LF4000BM2-YY-ZZ[1] | 1" - 2" | CLD 23 | MLTPL | |
LF4000BM3-YY-ZZ[1] | 3/4" | CLD 23 | MLTPL | |
LF400B[2] | 1/2" - 2" | CLD 23 | MLTPL | |
LFU2000B-YY-ZZ[1] | 1/2" | CLD 23 | MLTPL | |
LFU2000BM1-YY-ZZ[1] | 1" - 2" | CLD 23 | MLTPL | |
LFU2000BM2-YY-ZZ[1] | 3/4" - 1 1/2" | CLD 23 | MLTPL | |
LFU4000B-YY-ZZ[1] | 1/2" | CLD 23 | MLTPL | |
LFU4000BM2-YY-ZZ[1] | 3/4" - 2" | CLD 23 | MLTPL | |
[1] YY LBV - Supplied without shut-off valves Blank - Supplied with shut-off valves ZZ - Any Combination of the following: Blank - Standard unit BC - Brass Cap CT (or C&T) - Cap and teather FP - Gear Operated Ball Valve LH - Locking Handles S - Strainer (LF777SI) SH - Stainless handles Z3 - Stainless handles and nuts Z4 - Non-removable handles Z5 - Special dipped test co*ck adapter[2] Products may include one or more of the following prefixes or suffixes: S - Lead Free Strainer LF (as prefix) - Lead free LF (as suffix) - Less fitting QT - Quarter turn ball valve Options for non-wetted: C & T - Cap and tether test co*ck covers LH - Locking handled ball valves SH - Stainless handled ball valves[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
AMETEK, Inc. | |
1100 Cassatt Road | |
Berwyn, PA 19312 | |
United States | |
610-647-2121 | |
Visit this company's website |
Facility : Horsham, PA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Switches/Sensors[1][G] | ||||
575ABCDEFGH | 1 1/4" x 7" | CLD 23 | MLTPL | |
[1] Naming Convention: 575-A-B-C-D-E-F-G A - Sensing Port S - Nylon M - 316SS B - Input/Output (all) B - (12-40VDC / 4-20mA) C - Pressure Ranges (all listed) [0006 (0-6psi, up to 13.8ft water) to 0300 (0-300psi, up to 690ft water)] D - Electrical Connection N - Polyurethane with nut R - Polyurethane with nut and support bracket C - Polyurethane with conduit adapter E - Diaphragm Material L - 316SS F - Fill Fluid M - Mineral Oil G - X459 H - Cable Length [005 to 700 (range of feet of cable, custom)][G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Amtrol, Inc. | |
1400 Division Road | |
West Warwick, RI 02893-1008 | |
United States | |
800-736-1149 | |
401-884-6300 |
Facility : West Warwick, RI
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pressurized Water Storage Tanks[1] | ||||
ALTAPRO-MXB20 | 20 gal. | CLD 23 | MLTPL | |
ALTAPRO-MXB26 | 26 gal. | CLD 23 | MLTPL | |
ALTAPRO-MXB44 | 44 gal. | CLD 23 | MLTPL | |
ALTAPRO-MXB62 | 62 gal. | CLD 23 | MLTPL | |
ALTAPRO-MXB86 | 86 gal. | CLD 23 | MLTPL | |
ALTAPRO-MXB119 | 119 gal. | CLD 23 | MLTPL | |
HT2 | 2 gal. | CLD 23 | MLTPL | |
SL2I | 2 gal. | CLD 23 | MLTPL | |
WX-101 | 2 gal. | CLD 23 | MLTPL | |
CH1002 | 4.4 gal. | CLD 23 | MLTPL | |
HT4 | 4.4 gal. | CLD 23 | MLTPL | |
SL4I | 4.4 gal. | CLD 23 | MLTPL | |
WX-102 | 4.4 gal. | CLD 23 | MLTPL | |
WX-102PS | 4.4 gal. | CLD 23 | MLTPL | |
HT6H | 5.3 gal. | CLD 23 | MLTPL | |
SL5H | 5.3 gal. | CLD 23 | MLTPL | |
WX-105 | 5.3 gal. | CLD 23 | MLTPL | |
WX-105PS | 5.3 gal. | CLD 23 | MLTPL | |
WX-20H | 5.3 gal. | CLD 23 | MLTPL | |
WX-103 | 7.6 gal. | CLD 23 | MLTPL | |
HT8 | 8.6 gal. | CLD 23 | MLTPL | |
SL8I | 8.6 gal. | CLD 23 | MLTPL | |
SL 10I | 10.3 gal. | CLD 23 | MLTPL | |
SL10V | 10.3 gal. | CLD 23 | MLTPL | |
VW10 | 10.3 gal. | CLD 23 | MLTPL | |
WX-104 | 10.3 gal. | CLD 23 | MLTPL | |
WX-104OC | 10.3 gal. | CLD 23 | MLTPL | |
WX-104S | 10.3 gal. | CLD 23 | MLTPL | |
WX-104TK | 10.3 gal. | CLD 23 | MLTPL | |
TC-14[G] | 14 gal. | CLD 23 | MLTPL | |
PL-14[5] | 14 gal. | CLD 23 | MLTPL | |
CH-14[5] | 14 gal. | CLD 23 | MLTPL | |
HT14 | 14 gal. | CLD 23 | MLTPL | |
HT14H | 14 gal. | CLD 23 | MLTPL | |
SL14 | 14 gal. | CLD 23 | MLTPL | |
SL14H | 14 gal. | CLD 23 | MLTPL | |
SL14I | 14 gal. | CLD 23 | MLTPL | |
SL14V | 14 gal. | CLD 23 | MLTPL | |
WX-201 | 14 gal. | CLD 23 | MLTPL | |
VW14 | 14 gal. | CLD 23 | MLTPL | |
WF-14[5] | 14 gal. | CLD 23 | MLTPL | |
WX-200[4] | 14 gal. | CLD 23 | MLTPL | |
WXL-14[G] | 14 gal. | CLD 23 | MLTPL | |
WTA-401 | 17.5 gal. | CLD 23 | MLTPL | |
WX-401 | 17.5 gal. | CLD 23 | MLTPL | |
WX-401C | 17.5 gal. | CLD 23 | MLTPL | |
TC-20[G] | 20 gal. | CLD 23 | MLTPL | |
BN4202 | 20 gal. | CLD 23 | MLTPL | |
PL-20[5] | 20 gal. | CLD 23 | MLTPL | |
CH-20[5] | 20 gal. | CLD 23 | MLTPL | |
HT20 | 20 gal. | CLD 23 | MLTPL | |
PF-20 | 20 gal. | CLD 23 | MLTPL | |
SF-20 | 20 gal. | CLD 23 | MLTPL | |
SL20V | 20 gal. | CLD 23 | MLTPL | |
VW20 | 20 gal. | CLD 23 | MLTPL | |
WF-20[5] | 20 gal. | CLD 23 | MLTPL | |
WXL-20[G] | 20 gal. | CLD 23 | MLTPL | |
WP20 | 20 gal. | CLD 23 | MLTPL | |
WP20SS | 20 gal. | CLD 23 | MLTPL | |
WX-202[3] | 20 gal. | CLD 23 | MLTPL | |
WX-202PRO | 20 gal. | CLD 23 | MLTPL | |
WTA-402 | 25 gal. | CLD 23 | MLTPL | |
WX-402 | 25 gal. | CLD 23 | MLTPL | |
WX-402C | 25 gal. | CLD 23 | MLTPL | |
BN4202XL | 26 gal. | CLD 23 | MLTPL | |
PL-26[5] | 26 gal. | CLD 23 | MLTPL | |
CH-26[5] | 26 gal. | CLD 23 | MLTPL | |
HT26 | 26 gal. | CLD 23 | MLTPL | |
PF26 | 26 gal. | CLD 23 | MLTPL | |
SL26V | 26 gal. | CLD 23 | MLTPL | |
VW26 | 26 gal. | CLD 23 | MLTPL | |
WF-26[5] | 26 gal. | CLD 23 | MLTPL | |
WP26 | 26 gal. | CLD 23 | MLTPL | |
WP26SS | 26 gal. | CLD 23 | MLTPL | |
WX-202XL | 26 gal. | CLD 23 | MLTPL | |
WX-202XLPRO | 26 gal. | CLD 23 | MLTPL | |
WX-202XLUG | 26 gal. | CLD 23 | MLTPL | |
HT30 | 30 gal. | CLD 23 | MLTPL | |
TC-32[G] | 32 gal. | CLD 23 | MLTPL | |
BN8003 | 32 gal. | CLD 23 | MLTPL | |
PL-32[5] | 32 gal. | CLD 23 | MLTPL | |
CH-32[5] | 32 gal. | CLD 23 | MLTPL | |
HT32 | 32 gal. | CLD 23 | MLTPL | |
PF-32 | 32 gal. | CLD 23 | MLTPL | |
SF-32 | 32 gal. | CLD 23 | MLTPL | |
SL32V | 32 gal. | CLD 23 | MLTPL | |
VW32 | 32 gal. | CLD 23 | MLTPL | |
WF-32[5] | 32 gal. | CLD 23 | MLTPL | |
WXL-32[G] | 32 gal. | CLD 23 | MLTPL | |
WP32 | 32 gal. | CLD 23 | MLTPL | |
WP32SS | 32 gal. | CLD 23 | MLTPL | |
WX-203 | 32 gal. | CLD 23 | MLTPL | |
WX-203PRO | 32 gal. | CLD 23 | MLTPL | |
BN8205 | 34 gal. | CLD 23 | MLTPL | |
PL-34[5] | 34 gal. | CLD 23 | MLTPL | |
CH-34[5] | 34 gal. | CLD 23 | MLTPL | |
PF-20 | 34 gal. | CLD 23 | MLTPL | |
PF-34 | 34 gal. | CLD 23 | MLTPL | |
SF-34 | 34 gal. | CLD 23 | MLTPL | |
SL34V | 34 gal. | CLD 23 | MLTPL | |
VW34 | 34 gal. | CLD 23 | MLTPL | |
WF-34[5] | 34 gal. | CLD 23 | MLTPL | |
WP-34 | 34 gal. | CLD 23 | MLTPL | |
WP34SS | 34 gal. | CLD 23 | MLTPL | |
WTA-403 | 34 gal. | CLD 23 | MLTPL | |
WX-205 | 34 gal. | CLD 23 | MLTPL | |
WX-205PRO | 34 gal. | CLD 23 | MLTPL | |
WX-205TK | 34 gal. | CLD 23 | MLTPL | |
WX-205UG | 34 gal. | CLD 23 | MLTPL | |
WX-403 | 34 gal. | CLD 23 | MLTPL | |
WX-403C | 34 gal. | CLD 23 | MLTPL | |
TC-44[G] | 44 gal. | CLD 23 | MLTPL | |
BN10050 | 44 gal. | CLD 23 | MLTPL | |
PL-44[5] | 44 gal. | CLD 23 | MLTPL | |
CH-44[5] | 44 gal. | CLD 23 | MLTPL | |
HT44 | 44 gal. | CLD 23 | MLTPL | |
PF-44 | 44 gal. | CLD 23 | MLTPL | |
SF-44 | 44 gal. | CLD 23 | MLTPL | |
SL44V | 44 gal. | CLD 23 | MLTPL | |
VW44 | 44 gal. | CLD 23 | MLTPL | |
WF-44[5] | 44 gal. | CLD 23 | MLTPL | |
WXL-44[G] | 44 gal. | CLD 23 | MLTPL | |
WP44 | 44 gal. | CLD 23 | MLTPL | |
WP44SS | 44 gal. | CLD 23 | MLTPL | |
WX-250[2] | 44 gal. | CLD 23 | MLTPL | |
WX-250PRO | 44 gal. | CLD 23 | MLTPL | |
WX1T-250 | 44 gal. | CLD 23 | MLTPL | |
TC-62[G] | 62 gal. | CLD 23 | MLTPL | |
BN12051 | 62 gal. | CLD 23 | MLTPL | |
PL-62[5] | 62 gal. | CLD 23 | MLTPL | |
CH-62[5] | 62 gal. | CLD 23 | MLTPL | |
HT62 | 62 gal. | CLD 23 | MLTPL | |
PF-62 | 62 gal. | CLD 23 | MLTPL | |
SF-62 | 62 gal. | CLD 23 | MLTPL | |
SL62V | 62 gal. | CLD 23 | MLTPL | |
VW62 | 62 gal. | CLD 23 | MLTPL | |
WF-62 | 62 gal. | CLD 23 | MLTPL | |
WXL-62[G] | 62 gal. | CLD 23 | MLTPL | |
WP62 | 62 gal. | CLD 23 | MLTPL | |
WP62SS | 62 gal. | CLD 23 | MLTPL | |
WX-251[2] | 62 gal. | CLD 23 | MLTPL | |
WX1T-251 | 62 gal. | CLD 23 | MLTPL | |
WX-404 | 66 gal. | CLD 23 | MLTPL | |
WX-404C | 66 gal. | CLD 23 | MLTPL | |
WTA-404 | 66 gal. | CLD 23 | MLTPL | |
BN12055 | 81 gal. | CLD 23 | MLTPL | |
PL-81[5] | 81 gal. | CLD 23 | MLTPL | |
HT81 | 81 gal. | CLD 23 | MLTPL | |
PF-81 | 81 gal. | CLD 23 | MLTPL | |
SL81V | 81 gal. | CLD 23 | MLTPL | |
VW81 | 81 gal. | CLD 23 | MLTPL | |
WF-81 | 81 gal. | CLD 23 | MLTPL | |
WP81 | 81 gal. | CLD 23 | MLTPL | |
WP81SS | 81 gal. | CLD 23 | MLTPL | |
WX-255 | 81 gal. | CLD 23 | MLTPL | |
WX-255PRO | 81 gal. | CLD 23 | MLTPL | |
WX-255UG | 81 gal. | CLD 23 | MLTPL | |
TC-86[G] | 86 gal. | CLD 23 | MLTPL | |
BN17002 | 86 gal. | CLD 23 | MLTPL | |
PL-86[5] | 86 gal. | CLD 23 | MLTPL | |
CH-86[5] | 86 gal. | CLD 23 | MLTPL | |
HT86 | 86 gal. | CLD 23 | MLTPL | |
PF-86 | 86 gal. | CLD 23 | MLTPL | |
SF-86 | 86 gal. | CLD 23 | MLTPL | |
SL86VS | 86 gal. | CLD 23 | MLTPL | |
SL86VT | 86 gal. | CLD 23 | MLTPL | |
VW86 | 86 gal. | CLD 23 | MLTPL | |
WF-86[5] | 86 gal. | CLD 23 | MLTPL | |
WXL-86[G] | 86 gal. | CLD 23 | MLTPL | |
WP86 | 86 gal. | CLD 23 | MLTPL | |
WP86SS | 86 gal. | CLD 23 | MLTPL | |
WX-252 | 86 gal. | CLD 23 | MLTPL | |
WX-302 | 86 gal. | CLD 23 | MLTPL | |
WX-302PRO | 86 gal. | CLD 23 | MLTPL | |
WX-325L | 86 gal. | CLD 23 | MLTPL | |
WX1T-302 | 86 gal. | CLD 23 | MLTPL | |
WTA-405 | 88 gal. | CLD 23 | MLTPL | |
WX-405 | 88 gal. | CLD 23 | MLTPL | |
WX-405C | 88 gal. | CLD 23 | MLTPL | |
WX-406-C | 90 gal. | CLD 23 | MLTPL | |
TC-119[G] | 119 gal. | CLD 23 | MLTPL | |
BN22050 | 119 gal. | CLD 23 | MLTPL | |
PL-119[5] | 119 gal. | CLD 23 | MLTPL | |
CH-119[5] | 119 gal. | CLD 23 | MLTPL | |
HT119 | 119 gal. | CLD 23 | MLTPL | |
SF-119 | 119 gal. | CLD 23 | MLTPL | |
VW119 | 119 gal. | CLD 23 | MLTPL | |
WF-119[5] | 119 gal. | CLD 23 | MLTPL | |
WXL-119[G] | 119 gal. | CLD 23 | MLTPL | |
WP119 | 119 gal. | CLD 23 | MLTPL | |
WP119SS | 119 gal. | CLD 23 | MLTPL | |
WX-350 | 119 gal. | CLD 23 | MLTPL | |
WX-350PRO | 119 gal. | CLD 23 | MLTPL | |
WX-407-C | 132 gal. | CLD 23 | MLTPL | |
[1] Certified Pressurized Water Storage Tanks may be sold with a union which is designated by the inclusion of a "U" in the model number.[2] Optional suffixes UG or TK[3] Optional suffixes OC, HG, TK, H or HTC[4] Optional suffixes PS, UG, TK, or OC[5] Optional suffix WT[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Thermal Expansion Tanks | ||||
ST-1 | 0.038 gal. | D. HOT | MLTPL | |
G-5L | 2 gal. | D. HOT | MLTPL | |
PFT-5 | 2 gal. | D. HOT | MLTPL | |
PFXT5 | 2 gal. | D. HOT | MLTPL | |
PT-5 | 2 gal. | D. HOT | MLTPL | |
PTA-5 | 2 gal. | D. HOT | MLTPL | |
ST-5 | 2 gal. | D. HOT | MLTPL | |
ST-5-C | 2 gal. | D. HOT | MLTPL | |
T-5 | 2 gal. | D. HOT | MLTPL | |
G12L | 3.2 gal. | D. HOT | MLTPL | |
G8 | 3.2 gal. | D. HOT | MLTPL | |
G12 | 3.2 gal. | D. HOT | MLTPL | |
PFT-5XL | 3.2 gal. | D. HOT | MLTPL | |
PFT-8 | 3.2 gal. | D. HOT | MLTPL | |
PT-5XL | 3.2 gal. | D. HOT | MLTPL | |
PT-8 | 3.2 gal. | D. HOT | MLTPL | |
PTA-5XL | 3.2 gal. | D. HOT | MLTPL | |
PTA-8 | 3.2 gal. | D. HOT | MLTPL | |
RRT-8 | 3.2 gal. | D. HOT | MLTPL | |
RRT-12 | 3.2 gal. | D. HOT | MLTPL | |
ST-5XL | 3.2 gal. | D. HOT | MLTPL | |
ST-8 | 3.2 gal. | D. HOT | MLTPL | |
T-5XL | 3.2 gal. | D. HOT | MLTPL | |
T-8 | 3.2 gal. | D. HOT | MLTPL | |
TX-8 | 3.2 gal. | D. HOT | MLTPL | |
TX-12 | 3.2 gal. | D. HOT | MLTPL | |
PFT-12 | 4.4 gal. | D. HOT | MLTPL | |
PFXT12 | 4.4 gal. | D. HOT | MLTPL | |
PT-12 | 4.4 gal. | D. HOT | MLTPL | |
ST-12 | 4.4 gal. | D. HOT | MLTPL | |
T-12 | 4.4 gal. | D. HOT | MLTPL | |
NW12C | 5 gal. | D. HOT | MLTPL | |
PTA-12 | 5 gal. | D. HOT | MLTPL | |
ST-12-C | 5 gal. | D. HOT | MLTPL | |
NW20VC | 8 gal. | D. HOT | MLTPL | |
PTA-20V | 8 gal. | D. HOT | MLTPL | |
ST-20V-C | 8 gal. | D. HOT | MLTPL | |
PT-25V | 10.3 gal. | D. HOT | MLTPL | |
ST-25V | 10.3 gal. | D. HOT | MLTPL | |
PTA-30V | 13 gal. | D. HOT | MLTPL | |
ST-30V-C | 13 gal. | D. HOT | MLTPL | |
PT-30V | 14 gal. | D. HOT | MLTPL | |
ST-30V | 14 gal. | D. HOT | MLTPL | |
PTA-42V | 18 gal. | D. HOT | MLTPL | |
ST-42V-C | 18 gal. | D. HOT | MLTPL | |
PT-42V | 20 gal. | D. HOT | MLTPL | |
ST-42V | 20 gal. | D. HOT | MLTPL | |
PTA-60V | 25 gal. | D. HOT | MLTPL | |
ST-60V-C | 25 gal. | D. HOT | MLTPL | |
PT-60V | 34 gal. | D. HOT | MLTPL | |
ST-60V | 34 gal. | D. HOT | MLTPL | |
PT-80V | 44 gal. | D. HOT | MLTPL | |
ST-80V | 44 gal. | D. HOT | MLTPL | |
PTA-80V | 53 gal. | D. HOT | MLTPL | |
ST-80V-C | 53 gal. | D. HOT | MLTPL | |
PT-180V | 62 gal. | D. HOT | MLTPL | |
ST-180V | 62 gal. | D. HOT | MLTPL | |
ST-120V-C | 68 gal. | D. HOT | MLTPL | |
PTA-180V | 77 gal. | D. HOT | MLTPL | |
ST-180V-C | 77 gal. | D. HOT | MLTPL | |
ST-200V | 77 gal. | D. HOT | MLTPL | |
PT-210V | 86 gal. | D. HOT | MLTPL | |
ST-210V | 86 gal. | D. HOT | MLTPL | |
PTA-210V | 88 gal. | D. HOT | MLTPL | |
ST-210V-C | 88 gal. | D. HOT | MLTPL |
Anderson Metals, LLC | |
9311 Troost Avenue | |
Kansas City, MO 64131 | |
United States | |
800-821-5672 | |
816-471-2600 | |
Visit this company's website |
Facility : Kansas City, MO
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1][2][G] | ||||
7X0060 - [XX] Lead Free Yellow Brass Compression Sleeve | [3] | D. HOT | MLTPL | |
7X0061 - [XX] Lead Free Yellow Brass Compression Nut | [3] | D. HOT | MLTPL | |
7X0062 - [XX] Lead Free Yellow Brass Union Compression x Compression | [3] | D. HOT | MLTPL | |
7X0064 - [XX] Lead Free Yellow Brass Compression Tee (x3) | [3] | D. HOT | MLTPL | |
7X0066 - [XX] Lead Free Yellow Brass Female Coupling Compression x Female Pipe | [3] | D. HOT | MLTPL | |
7X0068 - [XXYY] Lead Free Yellow Brass Connector Compression x Male Pipe | [3] | D. HOT | MLTPL | |
7X0069 - [XXYY] Lead Free Yellow Brass Compression Elbow x Male Pipe | [3] | D. HOT | MLTPL | |
7X0071 - [XXYY] Lead Free Yellow Brass Compression Elbow x Female Pipe | [3] | D. HOT | MLTPL | |
7X0071 - [XXYY] Lead Free Yellow Brass Tee Compression x Male Pipe | [3] | D. HOT | MLTPL | |
7X0072 - [XXYY] Lead Free Yellow Brass Tee Compression x Male Pipe | [3] | D. HOT | MLTPL | |
7X0078 - [XXYY] Lead Free Yellow Brass Tee Compression x Female Pipe | [3] | D. HOT | MLTPL | |
7X0081 - [XX] Lead Free Yellow Brass Compression Cap | [3] | D. HOT | MLTPL | |
7X0082 - [XXYY] Lead Free Yellow Brass Reducing Union Compression x Compression | [3] | D. HOT | MLTPL | |
7X0084 - [XXYYZZ] Lead Free Yellow Brass Reducing Tee Compression (x3) | [3] | D. HOT | MLTPL | |
7X0086 - [XXYY] Lead Free Yellow Brass Compression x Sweat Adapter | [3] | D. HOT | MLTPL | |
7X0088-[XXYY] Lead Free Yellow Brass Tank Connector Compression x Male Pipe | [3] | D. HOT | MLTPL | |
7X0092-[XX] Lead Free Yellow Brass Tank Union Compression x Compression | [3] | D. HOT | MLTPL | |
7X0093 - [XXYY] Lead Free Yellow Brass Female Adapter Compression x Female Flare | [3] | D. HOT | MLTPL | |
7X0094 - [XXYY] Lead Free Yellow Brass Compression x Male Flare Adapter | [3] | D. HOT | MLTPL | |
7X0096-[XXYY] Lead Free Yellow Brass Tank Coupling Compression x Female Pipe | [3] | D. HOT | MLTPL | |
7X0097 - [XXYY] Lead Free Yellow Brass Compression x Female Compression | [3] | D. HOT | MLTPL | |
7X0622 - [XX] Lead Free Yellow Brass Union | [3] | D. HOT | MLTPL | |
7X0626 - [XXYY] Lead Free Yellow Brass Coupling | [3] | D. HOT | MLTPL | |
7X0628 - [XXYY] Lead Free Yellow Brass Connector Compression x Male Pipe | [3] | D. HOT | MLTPL | |
7X0642 - [XXYY] Lead Free Yellow Brass Union | [3] | D. HOT | MLTPL | |
7X0646 - [XXYY] Lead Free Yellow Brass Compression x Sweat Adapter | [3] | D. HOT | MLTPL | |
7X0662-[XX] Lead Free Yellow Brass Chrome Plated Union CompressionxCompression | [3] | D. HOT | MLTPL | |
7X0666-[XXYY] Lead Free Yellow Brass Chrome Plated Female Coupling | [3] | D. HOT | MLTPL | |
7X0668-[XXYY] Lead Free Yellow Brass Chrome Plated Connector | [3] | D. HOT | MLTPL | |
7X0682-[XXYY] Lead Free Yellow Brass Chrome Plated Reducing Union | [3] | D. HOT | MLTPL | |
7X0686 - [XXYY] Lead Free Yellow Brass Compression x Sweat Adapter | [3] | D. HOT | MLTPL | |
7X0962 - [XX] Lead Free Yellow Brass Union | [3] | D. HOT | MLTPL | |
7X0966 - [XX] Lead Free Yellow Brass Female Coupling Compression x Female Pipe | [3] | D. HOT | MLTPL | |
7X0968 - [XXYY] Lead Free Yellow Brass Connector | [3] | D. HOT | MLTPL | |
7X0982 - [XXYY] Lead Free Yellow Brass Union | [3] | D. HOT | MLTPL | |
7X0988 - [XXYY] Lead Free Yellow Brass Connector | [3] | D. HOT | MLTPL | |
7X0992 - [XX] Lead Free Yellow Brass Tank Union | [3] | D. HOT | MLTPL | |
7X0993 - [XXYY] Lead Free Yellow Brass Coupling | [3] | D. HOT | MLTPL | |
7X0994 - [XXYY] Lead Free Yellow Brass Coupling | [3] | D. HOT | MLTPL | |
7X0996 - [XXYY] Female Coupling Compression x Female Pipe | [3] | D. HOT | MLTPL | |
7X0997 - [XXYY] Compression x Female Compression | [3] | D. HOT | MLTPL | |
7X4014 - [XX] Lead Free Yellow Brass Short Flare Nut | [3] | D. HOT | MLTPL | |
7X4039 - [XX] Lead Free Yellow Brass Flare Plug | [3] | D. HOT | MLTPL | |
7X4040 - [XX] Lead Free Yellow Brass Flare Cap | [3] | D. HOT | MLTPL | |
7X4042 - [XX] Lead Free Yellow Brass Union Flare x Flare | [3] | D. HOT | MLTPL | |
7X4045 - [XXYY] Lead Free Yellow Brass Tee Flare x Male Pipe | [3] | D. HOT | MLTPL | |
7X4046 - [XXYY] Lead Free Yellow Brass Female Coupling Flare x Female Pipe | [3] | D. HOT | MLTPL | |
7X4048 - [XXYY] Lead Free Yellow Brass Half Union Flare x Male Pipe | [3] | D. HOT | MLTPL | |
7X4049 - [XXYY] Lead Free Yellow Brass Elbow Flare x Male Pipe | [3] | D. HOT | MLTPL | |
7X4050 - [XXYY] Lead Free Yellow Brass Elbow Flare x Female Pipe | [3] | D. HOT | MLTPL | |
7X4051 - [XXYY] Lead Free Yellow Brass Tee Flare x Male Pipe | [3] | D. HOT | MLTPL | |
7X4056 - [XXYY] Lead Free Yellow Brass Reducing Union Flare x Flare | [3] | D. HOT | MLTPL | |
7X4057 - [XXYY] Lead Free Yellow Brass Reducing Elbow Flare x Flare | [3] | D. HOT | MLTPL | |
7X4070 - [XX] Lead Free Yellow Brass Swivel Connector Flare x Flare | [3] | D. HOT | MLTPL | |
7X6100-[XX] Lead Free Yellow Brass Elbow 90 Degree Female Pipe x Female Pipe | [3] | D. HOT | MLTPL | |
7X6101 - [XX] Lead Free Yellow Brass Tee Barstock Female Pipe (x3) | [3] | D. HOT | MLTPL | |
7X6102 - [XX] Lead Free Yellow Brass Cross Barstock Female Pipe (x4) | [3] | D. HOT | MLTPL | |
7X6107 - [XX] Lead Free Yellow Brass Elbow 45 Degree Female Pipe x Female Pipe | [3] | D. HOT | MLTPL | |
7X6108 - [XX] Lead Free Yellow Brass Cap | [3] | D. HOT | MLTPL | |
7X6109-XX Lead Free Yellow Brass Plug Cored Square Head | [3] | D. HOT | MLTPL | |
7X6110 - [XXYY] Lead Free Yellow Brass Hex Bushing Male Pipe x Female Pipe | [3] | D. HOT | MLTPL | |
7X6112 - [XX] Lead Free Yellow Brass Close Nipple Male Pipe x Male Pipe | [3] | D. HOT | MLTPL | |
7X6113 - [XXYY] Lead Free Yellow Brass Long Nipple Male Pipe x Length | [3] | D. HOT | MLTPL | |
7X6114 - [XX] Lead Free Yellow Brass Plug Solid Square Head | [3] | D. HOT | MLTPL | |
7X6116-[XX] Lead Free Yellow Brass Street Elbow 90 Deg Female Pipe x Male Pipe | [3] | D. HOT | MLTPL | |
7X6119-[XXYY] Lead Free Yellow Brass Red Coupling Female Pipe x Female Pipe | [3] | D. HOT | MLTPL | |
7X6120 - [XXYY] Lead Free Yellow Brass Adapter Female Pipe x Male Pipe | [3] | D. HOT | MLTPL | |
7X6121 - [XX] Lead Free Yellow Brass Hex Head Plug Cored | [3] | D. HOT | MLTPL | |
7X6122 - [XX] Lead Free Yellow Brass Hex Nipple Male Pipe x Male Pipe | [3] | D. HOT | MLTPL | |
7X6123 - [XXYY] Lead Free Yellow Brass Reducing Hex Nipple Male Pipe x Male Pipe | [3] | D. HOT | MLTPL | |
7X6125 - [XX] Lead Free Yellow Brass Plug Solid Hex Head | [3] | D. HOT | MLTPL | |
7X6130 - [XX] Lead Free Yellow Brass Elbow Barstock Male Pipe x Male Pipe | [3] | D. HOT | MLTPL | |
7X6140 - [XXYY] Lead Free Yellow Brass Male Pipe x Female Pipe Face Bushing | [3] | D. HOT | MLTPL | |
7X6201 - [XX] Lead Free Yellow Brass Tee Forged Female Pipe (x3) | [3] | D. HOT | MLTPL | |
7X6235 - [XXYY] Lead Free Yellow Brass Reducing Elbow Male Pipe x Male Pipe | [3] | D. HOT | MLTPL | |
7X6322 - [XX] Lead Free Yellow Brass Long Hex Nipple Male Pipe x Male Pipe | [3] | D. HOT | MLTPL | |
7X7001 - [XXYY] Lead Free Yellow Brass Hose Barb x Male Pipe | [3] | D. HOT | MLTPL | |
7X7002 - [XXYY] Lead Free Yellow Brass Hose Barb x Female Pipe | [3] | D. HOT | MLTPL | |
7X7014 - [XX] Lead Free Yellow Brass Hose Splicer Barb x Barb | [3] | D. HOT | MLTPL | |
7X7042-[XXYY] Lead Free Yellow Brass Garden Hose Barb Set | [3] | D. HOT | MLTPL | |
7X7046-[XXYY] Lead Free Yellow Brass Garden Hose Barb Female Hose Swivel | [3] | D. HOT | MLTPL | |
7X7047 - [XXYY] Lead Free Yellow Brass Garden Hose Stem | [3] | D. HOT | MLTPL | |
7X7048 - [XXYY] Lead Free Yellow Brass Garden Hose Barb x Male Hose | [3] | D. HOT | MLTPL | |
7X7406 - [XX] Lead Free Yellow Brass Hex Garden Hose Nut | [3] | D. HOT | MLTPL | |
7X7407 - [XX] Lead Free Yellow Brass Round Garden Hose Nut | [3] | D. HOT | MLTPL | |
7X7411 - [XXYY] Lead Free Yellow Brass Female Hose Tapped Female Pipe | [3] | D. HOT | MLTPL | |
7X7420 - [XXYY] Lead Free Yellow Brass Female Hose x Male Pipe Swivel | [3] | D. HOT | MLTPL | |
7X7478 - [XXYYZZ] Lead Free Yellow Brass Male Hose x Male Pipe x 1/2 Female Pipe | [3] | D. HOT | MLTPL | |
7X7478 - [XXYY] Lead Free Yellow Brass Garden Hose Male Hose x Male Pipe | [3] | D. HOT | MLTPL | |
7X7480 - [XXYY] Lead Free Yellow Brass Garden Male Hose x Female Pipe | [3] | D. HOT | MLTPL | |
7X7484 - [XXYY] Lead Free Yellow Brass Garden Female Hose x Male Pipe | [3] | D. HOT | MLTPL | |
7X7484-[XXYYZZ] Lead Free Yellow Brass Female Hose x Male Pipe x1/2 Female Pipe | [3] | D. HOT | MLTPL | |
7X7486 - [XXYYZZ] Lead Free Yellow Brass Male Hose x Male Hose x 1/2 Female Pipe | [3] | D. HOT | MLTPL | |
7X7486 - [XXYY] Lead Free Yellow Brass Garden Male Hose x Male Hose | [3] | D. HOT | MLTPL | |
[1] Fitting packaging is coded by the following convention: X indicates packaging: 0 - Bulk pack 1 - Blister pack 3 - Single bag 5 - Flag tagged[2] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.[3] Fitting sizes are coded by the following convention: XX, YY, and ZZ indicate size: 02 - 1/8" 03 - 3/16" 04 - 1/4" 05 - 5/16" 06 - 3/8" 08 - 1/2" 10 - 5/8" 12 - 3/4" 14 - 7/8" 16 - 1" 24 - 1.5" 32 - 2" 40 - 2.5" 48 - 3"[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Kansas City, MO
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1][2][G] | ||||
7X7001 - [XXYY] Lead Free Yellow Brass Hose Barb x Male Pipe | [3] | D. HOT | MLTPL | |
7X7002 - [XXYY] Lead Free Yellow Brass Hose Barb x Female Pipe | [3] | D. HOT | MLTPL | |
7X7014 - [XX] Lead Free Yellow Brass Hose Splicer Barb x Barb | [3] | D. HOT | MLTPL | |
7X7042-[XXYY] Lead Free Yellow Brass Garden Hose Barb Set | [3] | D. HOT | MLTPL | |
7X7046-[XXYY] Lead Free Yellow Brass Garden Hose Barb Female Hose Swivel | [3] | D. HOT | MLTPL | |
7X7047 - [XXYY] Lead Free Yellow Brass Garden Hose Stem | [3] | D. HOT | MLTPL | |
7X7048 - [XXYY] Lead Free Yellow Brass Garden Hose Barb x Male Hose | [3] | D. HOT | MLTPL | |
7X7406 - [XX] Lead Free Yellow Brass Hex Garden Hose Nut | [3] | D. HOT | MLTPL | |
7X7407 - [XX] Lead Free Yellow Brass Round Garden Hose Nut | [3] | D. HOT | MLTPL | |
7X7411 - [XXYY] Lead Free Yellow Brass Female Hose Tapped Female Pipe | [3] | D. HOT | MLTPL | |
7X7420 - [XXYY] Lead Free Yellow Brass Female Hose x Male Pipe Swivel | [3] | D. HOT | MLTPL | |
7X7478 - [XXYYZZ] Lead Free Yellow Brass Male Hose x Male Pipe x 1/2 Female Pipe | [3] | D. HOT | MLTPL | |
7X7478 - [XXYY] Lead Free Yellow Brass Garden Hose Male Hose x Male Pipe | [3] | D. HOT | MLTPL | |
7X7480 - [XXYY] Lead Free Yellow Brass Garden Male Hose x Female Pipe | [3] | D. HOT | MLTPL | |
7X7484 - [XXYY] Lead Free Yellow Brass Garden Female Hose x Male Pipe | [3] | D. HOT | MLTPL | |
7X7484-[XXYYZZ] Lead Free Yellow Brass Female Hose x Male Pipe x1/2 Female Pipe | [3] | D. HOT | MLTPL | |
7X7486 - [XXYYZZ] Lead Free Yellow Brass Male Hose x Male Hose x 1/2 Female Pipe | [3] | D. HOT | MLTPL | |
7X7486 - [XXYY] Lead Free Yellow Brass Garden Male Hose x Male Hose | [3] | D. HOT | MLTPL | |
7X0082 - [XXYY] Lead Free Yellow Brass Reducing Union Compression x Compression | [3] | D. HOT | MLTPL | |
7X0084 - [XXYYZZ] Lead Free Yellow Brass Reducing Tee Compression (x3) | [3] | D. HOT | MLTPL | |
7X0086 - [XXYY] Lead Free Yellow Brass Compression x Sweat Adapter | [3] | D. HOT | MLTPL | |
7X0088-[XXYY] Lead Free Yellow Brass Tank Connector Compression x Male Pipe | [3] | D. HOT | MLTPL | |
7X0092-[XX] Lead Free Yellow Brass Tank Union Compression x Compression | [3] | D. HOT | MLTPL | |
7X0093 - [XXYY] Lead Free Yellow Brass Female Adapter Compression x Female Flare | [3] | D. HOT | MLTPL | |
7X0094 - [XXYY] Lead Free Yellow Brass Compression x Male Flare Adapter | [3] | D. HOT | MLTPL | |
7X0096-[XXYY] Lead Free Yellow Brass Tank Coupling Compression x Female Pipe | [3] | D. HOT | MLTPL | |
7X0097 - [XXYY] Lead Free Yellow Brass Compression x Female Compression | [3] | D. HOT | MLTPL | |
7X0622 - [XX] Lead Free Yellow Brass Union | [3] | D. HOT | MLTPL | |
7X0626 - [XXYY] Lead Free Yellow Brass Coupling | [3] | D. HOT | MLTPL | |
7X0628 - [XXYY] Lead Free Yellow Brass Connector Compression x Male Pipe | [3] | D. HOT | MLTPL | |
7X0642 - [XXYY] Lead Free Yellow Brass Union | [3] | D. HOT | MLTPL | |
7X0646 - [XXYY] Lead Free Yellow Brass Compression x Sweat Adapter | [3] | D. HOT | MLTPL | |
7X0662-[XX] Lead Free Yellow Brass Chrome Plated Union CompressionxCompression | [3] | D. HOT | MLTPL | |
7X0666-[XXYY] Lead Free Yellow Brass Chrome Plated Female Coupling | [3] | D. HOT | MLTPL | |
7X0668-[XXYY] Lead Free Yellow Brass Chrome Plated Connector | [3] | D. HOT | MLTPL | |
7X0682-[XXYY] Lead Free Yellow Brass Chrome Plated Reducing Union | [3] | D. HOT | MLTPL | |
7X0686 - [XXYY] Lead Free Yellow Brass Compression x Sweat Adapter | [3] | D. HOT | MLTPL | |
7X0962 - [XX] Lead Free Yellow Brass Union | [3] | D. HOT | MLTPL | |
7X0966 - [XX] Lead Free Yellow Brass Female Coupling Compression x Female Pipe | [3] | D. HOT | MLTPL | |
7X0968 - [XXYY] Lead Free Yellow Brass Connector | [3] | D. HOT | MLTPL | |
7X0982 - [XXYY] Lead Free Yellow Brass Union | [3] | D. HOT | MLTPL | |
7X0988 - [XXYY] Lead Free Yellow Brass Connector | [3] | D. HOT | MLTPL | |
7X0992 - [XX] Lead Free Yellow Brass Tank Union | [3] | D. HOT | MLTPL | |
7X0993 - [XXYY] Lead Free Yellow Brass Coupling | [3] | D. HOT | MLTPL | |
7X0994 - [XXYY] Lead Free Yellow Brass Coupling | [3] | D. HOT | MLTPL | |
7X0996 - [XXYY] Female Coupling Compression x Female Pipe | [3] | D. HOT | MLTPL | |
7X0997 - [XXYY] Compression x Female Compression | [3] | D. HOT | MLTPL | |
7X4014 - [XX] Lead Free Yellow Brass Short Flare Nut | [3] | D. HOT | MLTPL | |
7X4039 - [XX] Lead Free Yellow Brass Flare Plug | [3] | D. HOT | MLTPL | |
7X4040 - [XX] Lead Free Yellow Brass Flare Cap | [3] | D. HOT | MLTPL | |
7X4042 - [XX] Lead Free Yellow Brass Union Flare x Flare | [3] | D. HOT | MLTPL | |
7X4045 - [XXYY] Lead Free Yellow Brass Tee Flare x Male Pipe | [3] | D. HOT | MLTPL | |
7X4046 - [XXYY] Lead Free Yellow Brass Female Coupling Flare x Female Pipe | [3] | D. HOT | MLTPL | |
7X4048 - [XXYY] Lead Free Yellow Brass Half Union Flare x Male Pipe | [3] | D. HOT | MLTPL | |
7X4049 - [XXYY] Lead Free Yellow Brass Elbow Flare x Male Pipe | [3] | D. HOT | MLTPL | |
7X4050 - [XXYY] Lead Free Yellow Brass Elbow Flare x Female Pipe | [3] | D. HOT | MLTPL | |
7X4051 - [XXYY] Lead Free Yellow Brass Tee Flare x Male Pipe | [3] | D. HOT | MLTPL | |
7X4056 - [XXYY] Lead Free Yellow Brass Reducing Union Flare x Flare | [3] | D. HOT | MLTPL | |
7X4057 - [XXYY] Lead Free Yellow Brass Reducing Elbow Flare x Flare | [3] | D. HOT | MLTPL | |
7X4070 - [XX] Lead Free Yellow Brass Swivel Connector Flare x Flare | [3] | D. HOT | MLTPL | |
7X6100-[XX] Lead Free Yellow Brass Elbow 90 Degree Female Pipe x Female Pipe | [3] | D. HOT | MLTPL | |
7X6101 - [XX] Lead Free Yellow Brass Tee Barstock Female Pipe (x3) | [3] | D. HOT | MLTPL | |
7X6102 - [XX] Lead Free Yellow Brass Cross Barstock Female Pipe (x4) | [3] | D. HOT | MLTPL | |
7X6107 - [XX] Lead Free Yellow Brass Elbow 45 Degree Female Pipe x Female Pipe | [3] | D. HOT | MLTPL | |
7X6108 - [XX] Lead Free Yellow Brass Cap | [3] | D. HOT | MLTPL | |
7X6109-XX Lead Free Yellow Brass Plug Cored Square Head | [3] | D. HOT | MLTPL | |
7X6110 - [XXYY] Lead Free Yellow Brass Hex Bushing Male Pipe x Female Pipe | [3] | D. HOT | MLTPL | |
7X6112 - [XX] Lead Free Yellow Brass Close Nipple Male Pipe x Male Pipe | [3] | D. HOT | MLTPL | |
7X6113 - [XXYY] Lead Free Yellow Brass Long Nipple Male Pipe x Length | [3] | D. HOT | MLTPL | |
7X6114 - [XX] Lead Free Yellow Brass Plug Solid Square Head | [3] | D. HOT | MLTPL | |
7X6116-[XX] Lead Free Yellow Brass Street Elbow 90 Deg Female Pipe x Male Pipe | [3] | D. HOT | MLTPL | |
7X6119-[XXYY] Lead Free Yellow Brass Red Coupling Female Pipe x Female Pipe | [3] | D. HOT | MLTPL | |
7X6120 - [XXYY] Lead Free Yellow Brass Adapter Female Pipe x Male Pipe | [3] | D. HOT | MLTPL | |
7X6121 - [XX] Lead Free Yellow Brass Hex Head Plug Cored | [3] | D. HOT | MLTPL | |
7X6122 - [XX] Lead Free Yellow Brass Hex Nipple Male Pipe x Male Pipe | [3] | D. HOT | MLTPL | |
7X6123 - [XXYY] Lead Free Yellow Brass Reducing Hex Nipple Male Pipe x Male Pipe | [3] | D. HOT | MLTPL | |
7X6125 - [XX] Lead Free Yellow Brass Plug Solid Hex Head | [3] | D. HOT | MLTPL | |
7X6130 - [XX] Lead Free Yellow Brass Elbow Barstock Male Pipe x Male Pipe | [3] | D. HOT | MLTPL | |
7X6140 - [XXYY] Lead Free Yellow Brass Male Pipe x Female Pipe Face Bushing | [3] | D. HOT | MLTPL | |
7X6201 - [XX] Lead Free Yellow Brass Tee Forged Female Pipe (x3) | [3] | D. HOT | MLTPL | |
7X6235 - [XXYY] Lead Free Yellow Brass Reducing Elbow Male Pipe x Male Pipe | [3] | D. HOT | MLTPL | |
7X6322 - [XX] Lead Free Yellow Brass Long Hex Nipple Male Pipe x Male Pipe | [3] | D. HOT | MLTPL | |
7X0060 - [XX] Lead Free Yellow Brass Compression Sleeve | [3] | D. HOT | MLTPL | |
7X0061 - [XX] Lead Free Yellow Brass Compression Nut | [3] | D. HOT | MLTPL | |
7X0062 - [XX] Lead Free Yellow Brass Union Compression x Compression | [3] | D. HOT | MLTPL | |
7X0064 - [XX] Lead Free Yellow Brass Compression Tee (x3) | [3] | D. HOT | MLTPL | |
7X0066 - [XX] Lead Free Yellow Brass Female Coupling Compression x Female Pipe | [3] | D. HOT | MLTPL | |
7X0068 - [XXYY] Lead Free Yellow Brass Connector Compression x Male Pipe | [3] | D. HOT | MLTPL | |
7X0069 - [XXYY] Lead Free Yellow Brass Compression Elbow x Male Pipe | [3] | D. HOT | MLTPL | |
7X0071 - [XXYY] Lead Free Yellow Brass Compression Elbow x Female Pipe | [3] | D. HOT | MLTPL | |
7X0071 - [XXYY] Lead Free Yellow Brass Tee Compression x Male Pipe | [3] | D. HOT | MLTPL | |
7X0072 - [XXYY] Lead Free Yellow Brass Tee Compression x Male Pipe | [3] | D. HOT | MLTPL | |
7X0078 - [XXYY] Lead Free Yellow Brass Tee Compression x Female Pipe | [3] | D. HOT | MLTPL | |
7X0081 - [XX] Lead Free Yellow Brass Compression Cap | [3] | D. HOT | MLTPL | |
[1] Fitting packaging is coded by the following convention: X indicates packaging: 0 - Bulk pack 1 - Blister pack 3 - Single bag 5 - Flag tagged[2] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.[3] Fitting sizes are coded by the following convention: XX, YY, and ZZ indicate size: 02 - 1/8" 03 - 3/16" 04 - 1/4" 05 - 5/16" 06 - 3/8" 08 - 1/2" 10 - 5/8" 12 - 3/4" 14 - 7/8" 16 - 1" 24 - 1.5" 32 - 2" 40 - 2.5" 48 - 3"[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
APAC - Central DBA Arkhola Sand and Gravel | |
755 East Millsap Road | |
Fayetteville, AR 72703 | |
United States | |
479-785-4271 |
Facility : Van Buren, AR
Process Media
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gravel | ||||
Filter Gravel | [1] | CLD 23 | SLDOX | |
[1] All sizes and gradations. | ||||
Sand | ||||
Filter Sand | [1] | CLD 23 | SLDOX | |
[1] All sizes and gradations. |
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
Aqua Azul Corporation | |
13701 6th Street | |
Suite C1 | |
P.O. Box 337 | |
Armona, CA 93202 | |
United States | |
559-589-2430 | |
Visit this company's website |
Facility : Armona, CA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Ultra-Violet Reactors[1] | ||||
Hydros AAGI-(X)-(Y)[4] | 5" | CLD 23 | MLTPL | |
Hydros HICP-(X)-(Y)[8] | 1 1/2" - 2 1/2" | CLD 23 | MLTPL | |
Hydros I-(X)-(Y)[2] | 3" - 2" | CLD 23 | MLTPL | |
Hydros IJ-(X)-(Y)[5] | 3 1/2" - 5" | CLD 23 | MLTPL | |
Hydros IVM-(X)-(Y)[7] | 3" - 8" | CLD 23 | MLTPL | |
Hydros IVO-(X)-(Y)[3] | 3" - 20" | CLD 23 | MLTPL | |
Hydros JM-(X)-(Y)[6] | 3 1/2" | CLD 23 | MLTPL | |
Hydros VALIANT-(X)-(Y)[3] | 3" - 20" | CLD 23 | MLTPL | |
[1] Certified for a minimum daily flow of 21,804 L.[2] (X) (Size) - 25, 5, 15, 20, 35, 40, 60, 80, 100, 120, 160, 200, 240, 280, 360, 400, or 720 (Y) - S (Basic) SM (Monitor) W (Manual wiper) WM (Manual wiper, Monitor) WMM (Manual wiper, Monitor, Alarm) WA (Automatic wiper) WAM (Automatic wiper, Monitor) WAMM (Automatic wiper, Monitor, Alarm)[3] (X) (Size) - 10, 15, 20, 35, 40, 60, 80, 100, 120, 160, 200, 240, 280, 360, 400, or 720 (Y) - S (Basic) SM (Monitor) W (Manual wiper) WM (Manual wiper, Monitor) WMM (Manual wiper, Monitor, Alarm) WA (Automatic wiper) WAM (Automatic wiper, Monitor) WAMM (Automatic wiper, Monitor, Alarm)[4] (X) (Size) - 10, 15, 20, 35, 40, 60, 80, 100, 120, 160, 200, 240, 280, 360, 400, or 720 (Y) - S (Basic) SM (Monitor) W (Manual wiper) WM (Manual wiper, Monitor) WMM (Manual wiper, Monitor, Alarm) WA (Automatic wiper) WAM (Automatic wiper, Monitor) WAMM (Automatic wiper, Monitor, Alarm)[5] (X) (Size) - 7, 15, 30, or 50 (Y) - S (Basic) SM (Monitor) WM (Manual wiper, Monitor) WMM (Manual wiper, Monitor, Alarm) Alarm (Alarm only)[6] (X) (Size) - 7 or 10 (Y) - S (Basic)[7] (X) (Size) - 10, 15, 20, 35, 80, 100, 120, 40L, 60L, 80L, 100L, or 120L (Y) - S (Basic) SM (Monitor) W (Manual wiper) WM (Manual wiper, Monitor) WMM (Manual wiper, Monitor, Alarm) WA (Automatic wiper) WAM (Automatic wiper, Monitor) WAMM (Automatic wiper, Monitor, Alarm)[8] (X) (Size) - 1564, 2035, 2064, 2516, 2535, or 2564 (Y) - S (Basic) |
Aqua Revival, LLC | |
P.O. Box 796 | |
Williams Bay, WI 53191 | |
United States | |
262-725-6081 | |
Visit this company's website |
Facility : Elkhorn, WI
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Filtration Devices/Components[G] | ||||
BSG 20[1] | 20" x 64" | CLD 23 | MLTPL | |
BSG 20T[1] | 20" x 76" | CLD 23 | MLTPL | |
BSG 25[2] | 25" x 66.8" | CLD 23 | MLTPL | |
BSG 25T[2] | 25" x 78.8" | CLD 23 | MLTPL | |
BSG 30[3] | 30" x 72" | CLD 23 | MLTPL | |
BSG 30T[3] | 30" x 84" | CLD 23 | MLTPL | |
BSG 40[4] | 40" x 75.5" | CLD 23 | MLTPL | |
BSG 40T[4] | 40" x 87.5" | CLD 23 | MLTPL | |
BSG 50[5] | 50" x 76" | CLD 23 | MLTPL | |
BSG 50T[5] | 50" x 88" | CLD 23 | MLTPL | |
BSG 60[6] | 60" x 78.5" | CLD 23 | MLTPL | |
BSG 60T[6] | 60" x 90.5" | CLD 23 | MLTPL | |
[1] BSG 20 and BSG 20T are certified for a minimum flow of 72,000 gal./day.[2] BSG 25 and BSG 25T are certified for a minimum flow of 122,400 gal./day.[3] BSG 30 and BSG 30T are certified for a minimum flow of 182,880 gal./day.[4] BSG 40 and BSG 40T are certified for a minimum flow of 338,400 gal.day.[5] BSG 50 and BSG 50T are certified for a minimum flow of 537,120 gal./day.[6] BSG 60 and BSG 60T are certified for a minimum flow of 802,080 gal.day.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Aqueous Vets, LLC | |
16761 Clear Creek Road | |
Redding, CA 96001 | |
United States | |
925-331-0573 | |
Visit this company's website |
Ductile Iron Pipe[1][2]
[1] NSF 61 Certification extends to flanged or grooved and shouldered pipe only and does not include gaskets.[2] Certification includes equivalent ISO metric sizes.
Facility : Rogers, MN
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Ductile Iron Pipe[1] | ||||
Flanged Ductile Iron Pipe | 3" - 64" | CLD 23 | MLTPL | |
Grooved / Shouldered Joint Pipe | 3" - 64" | CLD 23 | MLTPL | |
[1] NSF 61 Certification extends to flanged or grooved and shouldered pipe only and does not include gaskets. |
Facility : Warren, OR
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Ductile Iron Pipe[1][2] | ||||
Flanged Ductile Iron Pipe | 3" - 64" | CLD 23 | ASPH | |
Grooved / Shouldered Joint Pipe | 3" - 64" | CLD 23 | ASPH | |
[1] NSF 61 Certification extends to flanged or grooved and shouldered pipe only and does not include gaskets.[2] Certification includes equivalent ISO metric sizes. |
Facility : Ephrata, PA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Ductile Iron Pipe[1][2] | ||||
Flanged Ductile Iron Pipe | 3" - 64" | CLD 23 | ASPH | |
Grooved / Shouldered Joint Pipe | 3" - 64" | CLD 23 | ASPH | |
[1] NSF 61 Certification extends to flanged or grooved and shouldered pipe only and does not include gaskets.[2] Certification includes equivalent ISO metric sizes. |
Facility : San Antonio, TX
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Ductile Iron Pipe[1] | ||||
Flanged Ductile Iron Pipe | 3" - 64" | CLD 23 | ASPH | |
Grooved/Shouldered Joint Pipe | 3" - 64" | CLD 23 | ASPH | |
[1] NSF 61 Certification extends to flanged or grooved and shouldered pipe only and does not include gaskets. |
Facility : Lynchburg, VA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Ductile Iron Pipe[G] | ||||
Bolt-Lok | 3" - 24" | CLD 23 | CMNT | |
Ductile Iron Pressure Pipe | 3" - 24" | CLD 23 | ASPH | |
Ductile Iron Pressure Pipe | 3" - 24" | CLD 23 | CMNT | |
HDSS® | 3" - 24" | CLD 23 | ASPH | |
Hydrant Barrel Pipe | 3" - 24" | CLD 23 | CMNT | |
Mech-Lok | 3" - 24" | CLD 23 | CMNT | |
Mechanical Joint, MJ | 3" - 24" | CLD 23 | ASPH | |
Mechanical Joint, MJ | 3" - 24" | CLD 23 | CMNT | |
Rigid-Lok | 3" - 24" | CLD 23 | CMNT | |
Side Outlet Pipe | 3" - 24" | CLD 23 | CMNT | |
Side Outlet Pipe | 3" - 24" | CLD 23 | ASPH | |
Snap-Lok River Crossing | 3" - 24" | CLD 23 | CMNT | |
Snap-Lok SLS, SLB | 3" - 24" | CLD 23 | CMNT | |
TR FLEX® PIPE | 3" - 24" | CLD 23 | ASPH | |
TR FLEX® PIPE | 3" - 24" | CLD 23 | CMNT | |
TYTON JOINT® Pipe, TJ | 3" - 24" | CLD 23 | CMNT | |
TYTON JOINT® Pipe, TJ | 3" - 24" | CLD 23 | ASPH | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Universal Fiberglass LLC | |
737-C Firetower Road | |
Dublin, GA 31021 | |
United States | |
478-279-2606 | |
Visit this company's website |
Facility : Dublin, GA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe[1] | ||||
Fiberglass Well Water Pipe | 6" - 12" | CLD 23 | FRP | |
[1] This product has been specifically evaluated for well casing applications but has not been evaluated for the effects of field slotting. | ||||
Well Casing[1] | ||||
Fiberglass Well Water Pipe | 6" - 12" | CLD 23 | FRP | |
[1] This product has been specifically evaluated for well casing applications but has not been evaluated for the effects of field slotting. |
Uponor | ![]() |
5925 148th Street West | |
Apple Valley, MN 55124 | |
United States | |
800-321-4739 | |
952-891-2000 | |
Visit this company's website |
Facility : Apple Valley, MN
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Tubing/Hose | ||||
AquaPEX | >= 1/4" | C. HOT | PEX | |
ResiPEX™ | >= 1/4" | C. HOT | PEX |
Facility : Hutchinson, MN
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Tubing/Hose | ||||
AquaPEX | >= 1/4" | C. HOT | PEX | |
ResiPEX™ | >= 1/4" | C. HOT | PEX |
US Grout, LLC | |
100 Hess Drive | |
Malad City, ID 83252 | |
United States | |
800-767-4701 | |
208-766-4777 | |
Visit this company's website |
Facility : Malad City, ID
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Grouts[1] | ||||
US Grout Ultrafine ND | [2] | CLD 23 | CMNT | |
US Grout Ultrafine SD | [2] | CLD 23 | CMNT | |
[1] Certified using a moist cure of 24 hours at ambient temperature.[2] Certified for use in contact with 1% of potable water in pipes >=22 inches in diameter or for 1% of potable water in a 500 gallon tank. |
USABlueBook | |
3781 Bur Wood Drive | |
Waukegan, IL 60085 | |
United States | |
800-548-1234 | |
800-548-1234 | |
Visit this company's website |
Facility : Lawrenceville, GA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Miscellaneous Process Devices/Components[1][G] | ||||
USABB IPT | N/A | CLD 23 | MLTPL | |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
UTEX Industries, Inc. | |
605 Utex Drive | |
Weimar, TX 78962 | |
United States | |
800-359-9229 | |
713-467-1000 |
Facility : Weimar, TX
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Encapsulated Rubber Disc | ||||
7297 | [1] | CLD 23 | EPDM | |
7298 | [1] | CLD 23 | EPDM | |
[1] Certification is restricted to use in distribution system valves as a material to encapsulate the disc. The surface area to volume ratio cannot exceed 50 sq. in./L. |
Utility Equipment Company | |
3739 State Street | |
Bettendorf, IA 52722 | |
United States | |
563-355-5376 | |
Visit this company's website |
Facility : Bettendorf, IA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Ductile Iron Pipe[1][G] | ||||
Flanged Ductile Iron Pipe | 3" - 24" | CLD 23 | ASPH | |
Grooved/Shouldered Joint Pipe | 3" - 24" | CLD 23 | ASPH | |
[1] Certification does not include gaskets.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
VAG USA, LLC | |
234 Clay Avenue | |
Mars, PA 16046 | |
United States | |
724-776-1020 | |
Visit this company's website |
Facility : A2 USA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Valves[1][G] | ||||
10FL-FIG804 | 10" | CLD 23 | MLTPL | |
10MJ-FIG804 | 10" | CLD 23 | MLTPL | |
12FL-FIG804 | 12" | CLD 23 | MLTPL | |
12MJ-FIG804 | 12" | CLD 23 | MLTPL | |
14FL-FIG804 | 14" | CLD 23 | MLTPL | |
14MJ-FIG804 | 14" | CLD 23 | MLTPL | |
16FL-FIG804 | 16" | CLD 23 | MLTPL | |
16MJ-FIG804 | 16" | CLD 23 | MLTPL | |
18FL-FIG804 | 18" | CLD 23 | MLTPL | |
18MJ-FIG804 | 18" | CLD 23 | MLTPL | |
20FL-FIG804 | 20" | CLD 23 | MLTPL | |
20MJ-FIG804 | 20" | CLD 23 | MLTPL | |
24FL-FIG804 | 24" | CLD 23 | MLTPL | |
24MJ-FIG804 | 24" | CLD 23 | MLTPL | |
4FL-FIG804 | 4" | CLD 23 | MLTPL | |
4MJ-FIG804 | 4" | CLD 23 | MLTPL | |
6FL-FIG804 | 6" | CLD 23 | MLTPL | |
6MJ-FIG804 | 6" | CLD 23 | MLTPL | |
8FL-FIG804 | 8" | CLD 23 | MLTPL | |
8MJ-FIG804 | 8" | CLD 23 | MLTPL | |
900 Series Air Valves | 1/2" - 16" | CLD 23 | MLTPL | |
901 | 1/2" - 16" | CLD 23 | MLTPL | |
902 | 1/2" - 16" | CLD 23 | MLTPL | |
905 | 1/2" - 16" | CLD 23 | MLTPL | |
910 | 1/2" - 16" | CLD 23 | MLTPL | |
912 | 1/2" - 16" | CLD 23 | MLTPL | |
920 | 1/2" - 16" | CLD 23 | MLTPL | |
922 | 1/2" - 16" | CLD 23 | MLTPL | |
923 | 1/2" - 16" | CLD 23 | MLTPL | |
929 | 1/2" - 16" | CLD 23 | MLTPL | |
930 | 4" - 16" | CLD 23 | MLTPL | |
933 | 4" - 16" | CLD 23 | MLTPL | |
945 | 1/2" - 3" | CLD 23 | MLTPL | |
945 | 4" - 16" | CLD 23 | MLTPL | |
950 | 4" - 16" | CLD 23 | MLTPL | |
951 | 4" - 16" | CLD 23 | MLTPL | |
952 | 4" - 16" | CLD 23 | MLTPL | |
960 | 4" - 16" | CLD 23 | MLTPL | |
961 | 4" - 16" | CLD 23 | MLTPL | |
Figure 220 Swing Check Valve | 2" - 48" | CLD 23 | MLTPL | |
Figure 221 Swing Check Valve | 2" - 48" | CLD 23 | MLTPL | |
Figure 222 Swing Check Valve | 2" - 48" | CLD 23 | MLTPL | |
Figure 230 Swing Check Valve | 2" - 48" | CLD 23 | MLTPL | |
Figure 231 Swing Check Valve | 2" - 48" | CLD 23 | MLTPL | |
Figure 232 Swing Check Valve | 2" - 48" | CLD 23 | MLTPL | |
Figure 250 Swing Check Valve | 2" - 48" | CLD 23 | MLTPL | |
Figure 251 Swing Check Valve | 2" - 48" | CLD 23 | MLTPL | |
Figure 252 Swing Check Valve | 2" - 48" | CLD 23 | MLTPL | |
Flanged Butterfly Valve (Figure #804) | 4" - 24" | CLD 23 | MLTPL | |
Mechanical Joint Butterfly Valve (Figure #804) | 4" - 24" | CLD 23 | MLTPL | |
Wafer Type Butterfly Valve (Figure #804) | 4" - 24" | CLD 23 | MLTPL | |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
VEGA Grieshaber KG | |
Am Hohenstein 113 | |
Schiltach, Baden-Württemberg | |
77761 | |
Germany | |
513-272-0131 | |
Visit this company's website |
Facility : Mason, OH
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Switches/Sensors[G] | ||||
VEGABAR 82 | 150 mm x 137 mm | CLD 23 | MLTPL | |
VEGAPULS 6X[2][3] | 185x109mm -240x120mm | CLD 23 | MLTPL | |
VEGAWELL 52[1] | 227 mm x 44 mm | CLD 23 | MLTPL | |
[1] Certified for use in tanks 10 gallons and greater.[2] Certified for use in tanks 1000 L and greater.[3] These sensors come with a variety of process connections, ranging from 1/2 - 4", in the following configurations: thread, clamp, collar, threaded socket, grooved flange, collar flange, collar clamp, grooved connection, Varinline Form, SMS, and NUEMO BioControl.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Veolia Water Technologies | |
4001 Weston Parkway | |
Cary, NC 27513 | |
United States | |
919-677-8310 | |
Visit this company's website |
Facility : Columbus, OH
Process Media
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Granular Activated Carbon | ||||
HYDREX 3959[3] | [2] | CLD 23 | GAC | |
HYDREX 3961[1] | [2] | CLD 23 | GAC | |
Hydrex 3960[1] | [2] | CLD 23 | GAC | |
[1] The carbon source is coal.[2] Certified for the following mesh sizes: 3 x 6 - 100 x 500.[3] The carbon source is coconut and coal. | ||||
Powdered Activated Carbon | ||||
HYDREX 3956 [4] | [5] | CLD 23 | GAC | |
Hydrex 3966[6] | [5] | CLD 23 | PAC | |
[4] The carbon source is coconut shell.[5] Certified for the following sizes: fines, -100, -200, -325, PAC-C, PAC-S, and PAC-F mesh and 20 - 50 um.[6] The carbon source is coconut or coal. |
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
Veolia Water Technologies | |
4001 Weston Parkway | |
Cary, NC 27513 | |
United States | |
919-677-8310 | |
Visit this company's website |
Facility : # 1 USA
Process Media
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Sand | ||||
HYDREX 9645 | .10mm - 1.60mm | CLD 23 | SLDOX |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
Veolia Water Technologies & Solutions | |
3600 Horizon Boulevard | |
Trevose, PA 19053 | |
United States | |
888-898-6766 | |
215-942-3534 |
Facility : Westborough, MA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Miscellaneous Process Devices/Components[G] | ||||
AR204 | [1] | CLD 23 | MLTPL | |
AR404 Coated Electrode | [2] | CLD 23 | MLTPL | |
AR908 | [1] | CLD 23 | MLTPL | |
CR64 | [1] | CLD 23 | MLTPL | |
CR67 | [1] | CLD 23 | MLTPL | |
EDR Spacer | [2] | CLD 23 | MLTPL | |
EDR Stack[3] | [4] | CLD 23 | MLTPL | |
Ionics V20 EDR Stack[3] | [5] | CLD 23 | MLTPL | |
MK IV-2 | [6] | CLD 23 | MLTPL | |
NFEDR AR908 coated electrode | [6] | CLD 23 | MLTPL | |
[1] AR204, CR64, CR67 and AR908 are certified for a minimum flow of 60,000 gallons per day when used in the EDR stack and 30,000 gallons per day when used in the Ionics V20 EDR Stack. [2] EDR Spacer and AR404 Coated Electrode are certified for a minimum flow of 30,000 gallons per day. [3] The EDR Stacks consist of an anion membrane (AR204 or AR908), cation membrane (CR67 or CR64) and intermembrane spacers (MK IV Spacer or EDR Spacer) and may contain a coated electrode (AR908 or AR404). Individual components are certified as replacement parts for the EDR Stack and the Ionics V20 EDR Stack.[4] EDR Stack is certified for a minimum flow of 60,000 gallons per day. [5] Ionics V20 EDR Stack is certified for a minimum flow of 30,000 gallons per day.[6] MK IV-2 and NFEDR AR908 Coated Electrode are certified for a minimum flow of 60,000 gallons per day.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Minnetonka, MN
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Filtration Devices/Components[1][G] | ||||
Adv. Industrial Grade filter (AIG.Z) | 2 1/2" | CLD 23 | PP | |
Filterplex.Z (FP.Zs) | 2 1/2" | CLD 23 | PP | |
HYTREX - GX SERIES | 2 1/2" | CLD 23 | PP | |
HYTREX - RX SERIES | 2 3/4" | CLD 23 | PP | |
LD SERIES | 2 1/2" | CLD 23 | PP | |
MB01-10 | 2 1/2" | CLD 23 | PP | |
MB01-20 | 2 1/2" | CLD 23 | PP | |
MB05-10 | 2 1/2" | CLD 23 | PP | |
MB05-20 | 2 1/2" | CLD 23 | PP | |
MB10-10 | 2 1/2" | CLD 23 | PP | |
MB10-20 | 2 1/2" | CLD 23 | PP | |
MB25-10 | 2 1/2" | CLD 23 | PP | |
MB25-20 | 2 1/2" | CLD 23 | PP | |
P-MBC01-10 | 2 1/2" | CLD 23 | PP | |
P-MBC01-20 | 2 1/2" | CLD 23 | PP | |
PURTREX - PX SERIES | 2 1/2" | CLD 23 | PP | |
Purtrex Plus (PXP.Z) | 2 1/2" | CLD 23 | PP | |
Ro.Save.Z | 2 1/2" | CLD 23 | PP | |
SELEX - SX SERIES | 2 1/2" | CLD 23 | PP | |
SWRO.Z [MM-LL-XXX] | 2 1/2" | CLD 23 | PP | |
Wellpro.Z (WP) | 2 1/2" | CLD 23 | PP | |
Z.Core (Z.Core MM-LL-XXX) | 2 1/2" | CLD 23 | PP | |
Z.Plex Absolute.Za (Abs.Za MM-LL-XXX) | 2.6" | CLD 23 | PP | |
Z.Plex EDR.Z (EDR.Z MM-LL-XXX) | 2 1/2" | CLD 23 | PP | |
Z.Plex HF.EDR.Z (MM-LL-XXX) | 6 1/2"" | CLD 23 | PP | |
Z.Plex HF.RO.Zs (MM-LL-XXX) | 6 1/2" | CLD 23 | PP | |
Z.Plex Muni.Zs (Muni.Zs MM-LL-XXX) | 2 1/2" | CLD 23 | PP | |
Z.Plex ROsave.Zs (RO.Zs MM-LL-XXX) | 2 1/2" | CLD 23 | PP | |
[Z.Plex HF.Za (MM-LL-XXX)] | 6 1/2" | CLD 23 | PP | |
[Z.Plex HF.Zs (MM-LL-XXX)] | 6 1/2" | CLD 23 | PP | |
[1] Number shown in size is the outer diameter. MM: Micron rating 95 - 0.5 01 to 200 (Equals micron rating as indicated by number) LL: Length 10 - 70" XXX: End adapters and O-Rings/Gasket options The PX, GX, LD, SX, RX, RO.Save.Z, WellproZ (WP), Purtrex Plus (PXP.Z) and Adv Industrial Grade filter (AIG.Z) designations will generally follow the format XXYY-ZZ-AB. XX - Series type YY - Micron rating ZZ - Length AB - End Adapters and O-Rings/Gasket options Additional Suffixes: YKP - Single Santoprene gasket, Polypropylene spring YKLP - Single Santoprene gasket, Extended core, Polypropylene spring YYP - Two santoprene gaskets End adapter and O-rings are optional and a suffix may or may not appear. End 1 A - Open end w/ gasket E - 222 Adapter w/ O-Ring F - 226 Adapter w/ O-Ring L - Extended core X - Open end (no adapter) Y - 1 inch (2.54 cm) Open end gasket End 2 A - Open end w/gasket K - Self seal spring H - Fin S - Solid end T - 338 adapter w/O-ring X - Open end (no adapter) Y - 1 inch (2.54 cm) Open end Gasket O-Ring and Gasket Material B - Buna-N E - EPDM P - Santoprene S - Silicone V - Viton2 Viton is a registered trademark of DuPont Dow Elastomers. Certified for a minimum flow of 720 gallons/day/10" of filter.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Reverse Osmosis Element[2][G] | ||||
AG-365 (3056666) | 8" | CLD 23 | MLTPL | |
AG-400 (3056667) | 8" | CLD 23 | MLTPL | |
AG-400, 34 (3056668) | 8" | CLD 23 | MLTPL | |
AG-440 (3056669) | 8" | CLD 23 | MLTPL | |
AG-90 (3056665) | 4" | CLD 23 | MLTPL | |
AG4040FM (3032513) | 4" | CLD 23 | MLTPL | |
AG8040F (3032515) | 8" | CLD 23 | MLTPL | |
AG8040F-400 (3032518) | 8" | CLD 23 | MLTPL | |
AG8040F-440 (3194307) | 8" | CLD 23 | MLTPL | |
AK-365 (3056679) | 8" | CLD 23 | MLTPL | |
AK-400 (3056680) | 8" | CLD 23 | MLTPL | |
AK-400, 34 (3156843) | 8" | CLD 23 | MLTPL | |
AK-440 (3056681) | 8" | CLD 23 | MLTPL | |
AK4040FM (3039082) | 4" | CLD 23 | MLTPL | |
AK4040FM (3039082) | 4" | CLD 23 | MLTPL | |
AK8040F (3039160) | 8" | CLD 23 | MLTPL | |
AK8040F-400 (3039161) | 8" | CLD 23 | MLTPL | |
AK8040F-440 (3194308) | 8" | CLD 23 | MLTPL | |
AP-400 (3134276) | 8" | CLD 23 | MLTPL | |
BEV-NF-400-FF (3158137) | 8" | CLD 23 | MLTPL | |
BEV-NF-440-FF (3158139) | 8" | CLD 23 | MLTPL | |
BEV-RO-400-CG (3158143) | 8" | CLD 23 | MLTPL | |
BEV-RO-400-FF (3158136) | 8" | CLD 23 | MLTPL | |
BEV-RO-440-CG (3158152) | 8" | CLD 23 | MLTPL | |
BEV-RO-440-FF (3158138) | 8" | CLD 23 | MLTPL | |
BEV-RO-CG (3205636) | 8" | CLD 23 | MLTPL | |
BEV-RO-LE-400-FF (3158150) | 8" | CLD 23 | MLTPL | |
BEV-RO-LE-440-FF (3158151) | 8" | CLD 23 | MLTPL | |
BEV-RO-LE-CG (3205637) | 8" | CLD 23 | MLTPL | |
BEV-RO-ULE-CG (3205638) | 8" | CLD 23 | MLTPL | |
CE8040F, (3097264) | 8" | CLD 23 | MLTPL | |
DURATHERM EXL RO 8040 (1231723) | 8" | CLD 23 | MLTPL | |
DURATHERM HWS RO4040 (1228459) | 4" | CLD 23 | MLTPL | |
DURATHERM HWS RO4040HR (1263435) | 4" | CLD 23 | MLTPL | |
DURATHERM HWS RO8040 (1228481) | 8" | CLD 23 | MLTPL | |
DURATHERM HWS RO8040HR (1263599) | 8" | CLD 23 | MLTPL | |
DURATHERM STD RO4040 (1228197) | 4" | CLD 23 | MLTPL | |
DURATHERM STD RO8040 (1228225) | 8" | CLD 23 | MLTPL | |
Durafoul RO1 (3198543) | 8" x 40" | CLD 23 | MLTPL | |
MUNI-NF-400 (1242400) | 8" | CLD 23 | MLTPL | |
MUNI-RO-400-HR (3051521) | 8" | CLD 23 | MLTPL | |
MUNI-RO-400-HR-LE (3051113) | 8" | CLD 23 | MLTPL | |
MUNI-RO-400-LE-WT-FF (3044144) | 8" | CLD 23 | MLTPL | |
MUNI-RO-400-ULE (3147561) | 8" | CLD 23 | MLTPL | |
MUNI-RO-430-HR (3051522) | 8" | CLD 23 | MLTPL | |
MUNI-RO-430-HR-LE (3051114) | 8" | CLD 23 | MLTPL | |
OSMO-BEV-RO-CA-FF (3133706) | 8" | CLD 23 | MLTPL | |
OSMO-BEV-RO-CG-WT (1266767) | 8" | CLD 23 | MLTPL | |
OSMO-BEV-RO-FF (1233032) | 8" | CLD 23 | MLTPL | |
OSMO-BEV-RO-LE-FF-WT (3027042) | 8" | CLD 23 | MLTPL | |
OSMO-BEV-RO-ULE-CG-WT (3099336) | 8" | CLD 23 | MLTPL | |
OSMO-BEV-UF-FF (1233034) | 8" | CLD 23 | MLTPL | |
PT8040F30 (1229772) | 8" | CLD 23 | MLTPL | |
R&D, ELEMENT, OSMO-BEV-RO-ULE-CG-WT, AL[2][3] | 8" x 40" | CLD 23 | MLTPL | |
[2] Elements with 4" diameter are Certified for a minimum flow of 7,078 liters/day. Elements with 8" diameter are Certified for a minimum flow of 29,602 liters/day. Certification is for the membrane elements only. Product requires a 2-hour conditioning flush to drain with de-ionized water at 12L/min before use.[2] Elements with 4" diameter are Certified for a minimum flow of 7,078 liters/day. Elements with 8" diameter are Certified for a minimum flow of 29,602 liters/day. Certification is for the membrane elements only. Product requires a 2-hour conditioning flush to drain with de-ionized water at 12L/min before use.[3] R&D, ELEMENT, OSMO-BEV-RO-ULE-CG-WT, AL model requires a 2-hour conditioning flush to drain with de-ionized water at 10 gpm before use.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Veolia Water Technologies & Solutions | |
3600 Horizon Boulevard | |
Trevose, PA 19053 | |
United States | |
952-988-6697 |
Facility : # 1 USA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Microfiltration Devices | ||||
CX 1-2-3-4-B[1] | [2] | CLD 23 | MLTPL | |
[1] Where CX - Universal Depth Cartridge Filter 1 & 2 - micron rating 3 & 4 - length B - Bulk Packaged[2] Models 20" and smaller are evaluated to point-of-entry use. Models larger than 20" are certified for a minimum daily flow rate of 2880 gallons. |
Veolia Water Technologies & Solutions | |
3600 Horizon Boulevard | |
Trevose, PA 19053 | |
United States | |
952-988-6697 |
Facility : # 2 USA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Reverse Osmosis Element[1] | ||||
1233033 OSMO BEV-NF-FF | 8" x 40" | CLD 23 | MLTPL | |
3097264 CE8040F | 8" x 40" | CLD 23 | MLTPL | |
[1] These models are certified for a minimum flow of 1100 gallons per day. Product requires a 1 hour conditioning flush with potable water prior to use. |
Veolia Water Technologies & Solutions | |
4636 Somerton Road | |
Trevose, PA 19053 | |
United States | |
952-988-6697 |
Facility : Maple Lake, MN
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Filtration Devices/Components | ||||
Z.Plex HF.RO.Zs (MM-LL-XXX) | 6.5" | CLD 23 | PP | |
Zplex. HF.EDR.Z (MM-LL-XXX) | 6.5" | CLD 23 | PP | |
[Z.Plex HF.Za (MM-LL-XXX)] | 6.5" | CLD 23 | PP | |
[Z.Plex HF.Zs (MM-LL-XXX)] | 6.5" | CLD 23 | PP |
[1] Number shown in size is the outer diameter. MM - Micron rating 95 - 0.5 01 to 200 (Equals micron rating as indicated by number) LL - Length (inches) 10 - 70 XXX - End Adapters and O-Rings/Gasket Options The PX, GX, LD, SX, RX, RO.Save.Z, WellproZ (WP), Purtrex Plus (PXP.Z) and Adv Industrial Grade filter (AIG.Z) designations will generally follow the format XXYY-ZZ-AB. XX - Series type YY - Micron rating ZZ - Length AB - End Adapters and O-Rings/Gasket options Additional Suffixes: YKP - Single Santoprene gasket, Polypropylene spring YKLP - Single Santoprene gasket, Extended core, Polypropylene spring YYP - Two Santoprene Gaskets End adapter and O-rings are optional and a suffix may or may not appear End 1 A - Open End w/Gasket E - 222 Adapter with O-Ring F - 226 Adapter with O-Ring Y - 1 inch (2.54 cm) Open end Gasket L - Extended Core X - Open end (No adapter) End 2 A - Open End w/Gasket K - Self Seal Spring H - Fin S - Solid End X - Open End (No adapter) Y - 1 inch (2.54 cm) Open end Gasket T - 338 adapter w/ O-ring O-Ring and Gasket Material B - Buna-N E - EPDM P - Santoprene S - Silicone V - Viton2[2] Viton is a registered trademark of DuPont Dow Elastomers.[3] Certified for a minimum flow of 720 gallons/day/10" of filter.
Verder, Inc. | |
312 Corporate Parkway | |
Suite 101 | |
Macon, GA 31210 | |
United States | |
877-783-7337 | |
Visit this company's website |
Facility : Macon, GA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pumps - Chemical Metering[1][2][3][G] | ||||
Dura 5 | 5 mm | CLD 23 | MLTPL | |
Dura 7 | 7 mm | CLD 23 | MLTPL | |
Dura 10 | 10 mm | CLD 23 | MLTPL | |
Dura 15 | 15 mm | CLD 23 | MLTPL | |
Dura 25 | 25 mm | CLD 23 | MLTPL | |
Dura 35 | 35 mm | CLD 23 | MLTPL | |
Dura 45 | 45 mm | CLD 23 | MLTPL | |
Dura 55 | 55 mm | CLD 23 | MLTPL | |
Dura 65 | 65 mm | CLD 23 | MLTPL | |
[1] Certified for use with polypropylene inserts and hypalon hoses.[2] These products are evaluated by diluting the exposed water treatment chemical to its maximum use level (MUL), as defined in NSF/ANSI/CAN 60.[3] Certified for use as a chemical metering pump with the following chemicals: Acetic Acid (80%) Aluminum Chloride (50%) Aluminum chlorohydrate (40%) Aluminum Chlorohydrate/Polyaluminum Chloride (40%) Aluminum Sodium Sulfate (15%) Aluminum Sulfate (50%) Ammonia, aqueous (35%) Ammonium Hydroxide (29%) Ammonium Sulfate (45%) Calcium carbonate (65%) Calcium Chloride (15%) Calcium Hydroxide (50%) Calcium Hypochlorite (15%) Calcium Thiosulfate (30%) Chlorine dioxide (2%) Citric Acid (100%) Copper Sulfate (5%) Copper Sulfate (25%) Dipotassium Orthophosphate (50%) Disodium Orthophosphate (50%) Ferric Chloride (50%) Ferric Sulfate (60%) Ferrous Chloride (40%) Ferrous Sulfate (30%) Fluorosilicic acid (25%) Hydrochloric acid (38%) Hydrogen Peroxide (30%) Magnesium Sulfate (25%) Peracetic Acid (10%) Phosphoric acid (75%) Poly (Diallyldimethylammonium Chloride)(pDADMAC) (50%) Poly Aluminum Chloride (100%) Polyacrylamide (2.5%) Polyaluminum Chloride (45%) Polyaluminum Chlorosulfate (50%) Polyaluminum Hydroxychlorosulfate (75%) Polyaluminum Silicate Sulfate (66%) Polyaluminum Sulfate (50%) Polyphosphoric Acid (100%) Potassium Carbonate (47%) Potassium Chloride (34%) Potassium hydroxide (45%) Potassium Hydroxide (50%) Potassium Permanganate (20%) Potassium Tripolyphosphate (100%) Sodium Acid Pyrophosphate (12%) Sodium Aluminate (50%) Sodium Ascorbate (56%) Sodium Bicarbonate (100%) Sodium Bisulfate (50%) Sodium Carbonate (20%) Sodium Carbonate (85%) Sodium Chlorate (100%) Sodium Chloride (26%) Sodium Chlorite (7.5%) Sodium Dichloroisocyanurate (25%) Sodium Fluoride (4%) Sodium Hydroxide (50%) Sodium Hypochlorite (15%) Sodium Metabisulfite (50%) Sodium Percarbonate (15%) Sodium Permanganate (40%) Sodium Polyphosphates (35%) Sodium Silicate (100%) Sodium Sulfite (20%) Sodium Trimetaphosphate (20%) Sodium Tripolyphosphate (15%) Sulfur Dioxide (5%) Sulfuric acid (98.5%) Tetrapotassium Pyrophosphate (60%) Tetrasodium Pyrophosphate (7%) Tricalcium Phosphate (70%, Slurry) Trichloroisocyanuric Acid (10%) Zinc Chloride (62%) Zinc Orthophosphate (100%) Zinc Sulfate (36%)[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
VF-11 Industries, Inc. DBA: Durapower Products | |
18330 Sutter Boulevard | |
Morgan Hill, CA 95037 | |
United States | |
408-482-6181 | |
Visit this company's website |
Facility : Morgan Hill, CA
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Patching Materials[G] | ||||
DPT-0130 Pipe & Hose Repair Kit | [1] | C. HOT | PUR | |
DPT-0260 Pipe & Hose Repair Kit | [1] | C. HOT | PUR | |
DPT-3108 Pipe & Hose Repair Kit | [1] | C. HOT | PUR | |
DPT-4180 Pipe & Hose Repair Kit | [1] | C. HOT | PUR | |
[1] Certified for a maximum surface area to volume ratio of 0.5 square inches/L.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Viaflex | |
821 West Algonquin Street | |
Sioux Falls, SD 57104 | |
United States | |
605-335-0174 | |
Visit this company's website |
Facility : Sioux Falls, SD
Protective (Barrier) Materials
Water | Water | |||
Water Contact | Contact | Contact | ||
Trade Designation | Size Restriction | Temp | Material | |
Liners[1] | ||||
Dura-Skrim K30B | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K30BD | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K30BK | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K30BW | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K36B | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K36BD | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K36BDT1 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K36BDT2 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K36BK | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K36BKT1 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K36BKT2 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K36BT1 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K36BT2 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K36BW | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K36BWT1 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K36BWT2 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K45B | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K45BD | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K45BDT1 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K45BDT2 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K45BK | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K45BKT1 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K45BKT2 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K45BT1 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K45BT2 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K45BW | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim K45BWT2 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N30B | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N30BD | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N30BK | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N30BW | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N36B | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N36BD | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N36BDT1 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N36BDT2 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N36BK | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N36BKT1 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N36BKT2 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N36BT1 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N36BT2 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N36BW | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N36BWT1 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N36BWT2 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N45B | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N45BD | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N45BDT1 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N45BDT2 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N45BK | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N45BKT1 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N45BKT2 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N45BT1 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N45BT2 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N45BW | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N45BWT1 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim N45BWT2 | >= 5000 gal. | CLD 23 | PE | |
Dura-Skrim NQ30B | >= 5000 gal. | CLD 23 | PP | |
Dura-Skrim NQ30BK | >= 5000 gal. | CLD 23 | PP | |
Dura-Skrim NQ30BW | >= 5000 gal. | CLD 23 | PP | |
Dura-Skrim NQ36B | >= 5000 gal. | CLD 23 | PP | |
Dura-Skrim NQ36BK | >= 5000 gal. | CLD 23 | PP | |
Dura-Skrim NQ36BW | >= 5000 gal. | CLD 23 | PP | |
Dura-Skrim NQ45B | >= 5000 gal. | CLD 23 | PP | |
Dura-Skrim NQ45BK | >= 5000 gal. | CLD 23 | PP | |
Dura-Skrim NQ45BW | >= 5000 gal. | CLD 23 | PP | |
Dura-Skrim NQ60B | >= 5000 gal. | CLD 23 | PP | |
[1] Either side may be used as the water contact side. |
Vibrantz Technologies, DBA Prince Minerals | |
14 East 44tth Street 5th Floor | |
New York, NY 10017 | |
United States | |
646-747-4200 | |
Visit this company's website |
Facility : Quincy, IL
Process Media
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Oxidative Media | ||||
Pyrolox™ | [1] | CLD 23 | MNDOX | |
[1] Certified for the following US mesh sizes: 8 x 20, 20 x 40. Certified for the following UK mesh sizes: 18/44. |
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
Facility : New Johnsonville, TN
Process Media
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Oxidative Media | ||||
Pyrolox™ | [1] | CLD 23 | MNDOX | |
[1] Certified for the following US mesh sizes: 8x20, 20x40. Certified for the following UK mesh size: 18/44. |
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
Facility : Houston, TX
Process Media
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Oxidative Media | ||||
Filter-Ox | 18 x 45 mesh | CLD 23 | OTHER | |
Pyrolox Advantage | 18 x 45 mesh | CLD 23 | OTHER |
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
Victaulic | |
4901 Kesslersville Road | |
Easton, PA 18040 | |
United States | |
800-742-5842 | |
610-559-3300 |
Facility : Solon, OH
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Lubricants[G] | ||||
Vic-Lube | >= 1/2" | CLD 23 | LUB | |
Victaulic Lubricant | >= 1/2" | CLD 23 | LUB | |
Victaulic Lubricant Tan | >= 1/2" | CLD 23 | LUB | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Victaulic Co. | |
4901 Kesslersville Road | |
Easton, PA 18040 | |
United States | |
800-742-5842 | |
610-559-3300 | |
Visit this company's website |
Facility : # 1 SS USA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1][2][G] | ||||
100 (90° Long Radius Elbow) (304L) | 1" - 3" | C. HOT | SS | |
100 (90° Long Radius Elbow) (316L) | 1 1/2" - 3" | C. HOT | SS | |
110 (45° Long Radius Elbow) (304L) | 1" - 6" | C. HOT | SS | |
110 (45° Long Radius Elbow) (316L) | 1" - 4" | C. HOT | SS | |
20 (Tee) (304L) | 1 1/4" - 8" | C. HOT | SS | |
20 (Tee) (316L) | 1 1/2" - 10" | C. HOT | SS | |
420 (Tee) (304L) | 1 1/4" - 8" | C. HOT | SS | |
420 (Tee) (316L) | 1 1/2" - 10" | C. HOT | SS | |
450 (Concentric Reducer) (304L) | 1 1/2"x3/4" - 8"x6" | C. HOT | SS | |
450 (Concentric Reducer) (316L) | 1 1/2"x1" - 8"x6" | C. HOT | SS | |
451 (Eccentric Reducer) (304L) | 2"x1 1/2" - 8"x6" | C. HOT | SS | |
451 (Eccentric Reducer) (316L) | 2" x 1" - 8" x 6" | C. HOT | SS | |
50 (Concentric Reducer) (304L) | 1 1/2"x3/4" - 8"x6" | C. HOT | SS | |
50 (Concentric Reducer) (316L) | 1 1/2"x1" - 8"x6" | C. HOT | SS | |
51 (Eccentric Reducer) (304L) | 2"x1 1/2" - 8"x6" | C. HOT | SS | |
51 (Eccentric Reducer) (316L) | 2" x 1" - 8" x 6" | C. HOT | SS | |
60 (Cap) (304L) | 4" - 6" | C. HOT | SS | |
60 (Cap) (316L) | 4" - 6" | C. HOT | SS | |
[1] Product trade names may feature suffix "H" to denote heavy wall product, fabricated from schedule 40S Grade 304 or 316 stainless steel pipe. Default fabrication is 10S Grade 304 or 316 stainless steel pipe.[2] Models may feature suffix "SS" for commercial purposes.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : # 3 SS USA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1][2][3][G] | ||||
60 (Cap) (304L) | 3/4" - 6" | C. HOT | SS | |
60 (Cap) (316L) | 1" - 6" | C. HOT | SS | |
460 (Cap) (304L) | 3/4" - 6" | C. HOT | SS | |
460 (Cap) (316L) | 1" - 6" | C. HOT | SS | |
[1] Certification is for stainless steel fittings only and does not include the gasketed couplings.[2] Product trade names may feature suffix "H" to denote heavy wall product, fabricated from schedule 40S Grade 304L or 316L stainless steel pipe. Default fabrication is 10S Grade 304L or 316L stainless steel pipe.[3] Models may feature suffix "SS" for commercial purposes.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Duluth, GA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Manifolds[1][G] | ||||
26 (Outlet Header) | 1 1/2"x1" - 12"x12" | CLD 23 | SS | |
57 (Concentric Reducing Header) | 1 1/2"x1" - 12"x12" | CLD 23 | SS | |
58 (Eccentric Reducing Header) | 1 1/2"x1" - 12"x12" | CLD 23 | SS | |
[1] Models may feature suffix "SS" for commercial purposes.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Couplings[1][2][G] | ||||
230 (Non-Restrained Flexible Coupling) | 6" - 144" | CLD 23 | MLTPL | |
232 (Restrained Flexible Coupling) | 6" - 144" | CLD 23 | MLTPL | |
233 (Restrained Flexible Coupling) | 6" - 144" | CLD 23 | MLTPL | |
Victaulic Bolted Split Sleeve Couplings | 6" - 144" | CLD 23 | MLTPL | |
[1] Certified for both full circumference and half couplings.[2] Models may feature suffix "SS" for commercial purposes.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Fittings[2][G] | ||||
100 (90° Elbow)[3] | 3" - 18" | C. HOT | SS | |
110 (45° Elbow)[3] | 3" - 18" | C. HOT | SS | |
410 (90° Elbow)[3] | 3" - 18" | C. HOT | SS | |
411 (45° Elbow)[3] | 3" - 18" | C. HOT | SS | |
420 (Tee)[3] | 1" - 18" | C. HOT | SS | |
425 (Grooved Branch Reducing Tee)[3] | 1 1/2"x1" - 12"x10" | C. HOT | SS | |
445 (Flanged Adapter Nipple)[4] | 1 1/4" - 12" | C. HOT | SS | |
450 (Concentric Reducer)[3] | 2 ½" - 2" - 12"x10" | C. HOT | SS | |
451 (Eccentric Reducer)[3][5] | 4"x2" - 10"x8" | C. HOT | SS | |
460 (Dish Cap)[3] | 5", 8", 10" | C. HOT | SS | |
A10 (Floor- Mounted Carbon Steel Riser Anchor)[3] | 2" - 12" | C. HOT | SS | |
[2] Models may feature suffix "SS" for commercial purposes.[3] Certified for stainless steel fittings only and does not include the gasketed couplings.[4] Product trade names may feature suffix "F" or "R" to denote flat (F) or raised ® flange face.[5] Product trade names may feature suffix "H" to denote heavy wall product, fabricated from schedule 40S Grade 304 or 316 stainless steel pipe. Default fabrication is 10S Grade 304 or 316 stainless steel pipe.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Pipe[2][3][5][G] | ||||
440 (Adapter Nipple) (Groove ×Thread) | 1 1/2" x 4"-3" x 4" | C. HOT | SS | |
442 (Adapter Nipple) (Groove × Bevel) | 1 1/2" x 4"-8" x 6" | C. HOT | SS | |
443 (Adapter Nipple) (Groove x Groove) | 2" x 4" - 3" x 4" | C. HOT | SS | |
[2] Models may feature suffix "SS" for commercial purposes.[3] Certified for stainless steel fittings only and does not include the gasketed couplings.[5] Product trade names may feature suffix "H" to denote heavy wall product, fabricated from schedule 40S Grade 304 or 316 stainless steel pipe. Default fabrication is 10S Grade 304 or 316 stainless steel pipe.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Easton, PA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Valves[1][G] | ||||
416 (Check Valve)[372] | 2" - 12" | C. HOT | MLTPL | |
461 (Butterfly Valve)[372] | 2" - 12" | C. HOT | MLTPL | |
462 (Butterfly Valve)[372] | 2" - 12" | C. HOT | MLTPL | |
702 (Butterfly Valve) | 2 1/2" - 10" | CLD 23 | MLTPL | |
7A2 (Butterfly Valve) | 2 1/2" - 10" | CLD 23 | MLTPL | |
7B2 (Butterfly Valve) | 2 1/2" - 10" | CLD 23 | MLTPL | |
E416 (Check Valve)[372] | 2" - 12" | C. HOT | MLTPL | |
E461 (Butterfly Valve)[372] | 2" - 12" | C. HOT | MLTPL | |
[1] Models may feature suffix "SS" for commercial purposes.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [372] Product also complies with NSF/ANSI 372. |
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1][2][G][372] | ||||
422 (Mechanical-T Outlet) | 3" x 1 1/2"-8" x 4" | C. HOT | MLTPL | |
[1] Certification includes sealing gasket Grade E EPDM only.[2] Models may feature suffix "SS" for commercial purposes.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [372] Product also complies with NSF/ANSI 372. |
Facility : Easton, PA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[G] | ||||
610 (90° Elbow) | 2" - 4" | C. HOT | CU | |
611 (45° Elbow) | 2" - 5" | C. HOT | CU | |
625 (Reducing Tee) (Groove x Groove x Groove) | 2 1/2" - 2" | C. HOT | CU | |
626 (Reducing Tee) (Groove x Groove x Cup) | 2" x 3/4" - 4" x 1½" | C. HOT | CU | |
650 (Concentric Reducer) (Groove x Groove) | 2" - 4" | C. HOT | CU | |
652 (Concentric Reducer) (Groove × Cup) | 1" - 4" | C. HOT | CU | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Bristol, TN
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[G] | ||||
350 (90° Elbow) | 2" - 12" | C. HOT | MLTPL | |
351 (45° Elbow) | 2" - 12" | C. HOT | MLTPL | |
352 (Tee) | 2" - 12" | C. HOT | MLTPL | |
353 (Reducing Tee) (Groove x Groove x Groove) | 6"x6"x3" - 12"x10" | C. HOT | MLTPL | |
354 (Reducing Tee) (Groove × Groove × Socket) | 2"x2"x1"-12"x12"x2" | C. HOT | MLTPL | |
Aquamine | 2" - 12" | CLD 23 | MLTPL | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Pipe[G] | ||||
Aquamine PVC 1120 High Impact Pipe | 2" - 12" | CLD 23 | PVC | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Victaulic Company | |
4901 Kesslersville Road | |
Easton, PA 18040 | |
United States | |
800-742-5842 | |
610-559-3300 | |
Visit this company's website |
Facility : # 1 USA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe | ||||
Aquamine HP | 1/2" - 12" | CLD 23 | PVC | |
Aquamine PVC 1120 High Impact Pipe | 1/2" - 12" | CLD 23 | PVC |
Victaulic Company | |
4901 Kesslersville Road | |
Easton, PA 18040 | |
United States | |
800-742-5842 | |
610-559-3300 | |
Visit this company's website |
Facility : Victaulic Bermad Technologies (VBT), Houston, TX
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Valves[1][G] | ||||
97X | 1 1/2" - 36" | D. HOT | MLTPL | |
[1] 97X Series Control Valves are Certified for use with these optional control trim accessories: Pilot PB Pilot PA Pilot HC Self Flushing Filter Y-Filter Y10 Check Valve H 410 SS co*ck Valve S20 Needle Valve V6 and V8 Series Hydraulic Relay (Amplifier) Stainless Steel 316 tubes and fittings[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Viega LLC. | |
585 Interlocken Boulevard | |
Broomfield, CO 80021 | |
United States | |
800-774-5237 |
Facility : # 1 USA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings | ||||
4813.4ZL 76575 MegaPress Trans Cplg, PxFTG[G] | 1/2" | C. HOT | BRONZE | |
4813.4ZL 76580 MegaPress Trans Cplg, PxFTG[G] | 3/4" | C. HOT | BRONZE | |
4813.4ZL 76585 MegaPress Trans Cplg, PxFTG[G] | 1" | C. HOT | BRONZE | |
4813.4ZL 76590 MegaPress Trans Cplg, PxFTG[G] | 1 1/4" | C. HOT | BRONZE | |
4813.4ZL 76595 MegaPress Trans Cplg, PxFTG[G] | 1 1/2" | C. HOT | BRONZE | |
4813.4ZL 76600 MegaPress Trans Cplg, PxFTG[G] | 2" | C. HOT | BRONZE | |
4815ZL 76605 MegaPress Coupling, PxP[G] | 1/2" | C. HOT | BRONZE | |
4815ZL 76610 MegaPress Coupling, PxP[G] | 3/4" | C. HOT | BRONZE | |
4815ZL 76615 MegaPress Coupling, PxP[G] | 1" | C. HOT | BRONZE | |
4815ZL 76620 MegaPress Coupling, PxP[G] | 1 1/4" | C. HOT | BRONZE | |
4815ZL 76625 MegaPress Coupling, PxP[G] | 1 1/2" | C. HOT | BRONZE | |
4815ZL 76630 MegaPress Coupling, PxP[G] | 2" | C. HOT | BRONZE | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings | ||||
Model 0911XL 20823 Copper Male Adapter, P x M NPT, 2 1/2"[1][G] | 2 1/2" | C. HOT | CU | |
Model 0911XL 20828 Copper Male Adapter, P x M NPT, 3"[1][G] | 3" | C. HOT | CU | |
Model 0911XL 20838 Copper Male Adapter, P x M NPT, 4"[1][G] | 4" | C. HOT | CU | |
Model 0912XL 20819 Copper Female Adapter, P x F NPT, 2 1/2"[1][G] | 2 1/2" | C. HOT | CU | |
Model 0912XL 20829 Copper Female Adapter, P x F NPT, 3"[1][G] | 3" | C. HOT | CU | |
Model 0912XL 20839 Copper Female Adapter, P x F NPT, 4"[1][G] | 4" | C. HOT | CU | |
Model 0915.1XL 20758 Copper Reducer, FTG x P, 2 1/2" x 2"[1][G] | 2 1/2" x 2" | C. HOT | CU | |
Model 0915.1XL 20763 Copper Reducer, FTG x P, 3" x 2"[1][G] | 3" x 2" | C. HOT | CU | |
Model 0915.1XL 20768 Copper Reducer, FTG x P, 3" x 2 1/2"[1][G] | 3" x 2 1/2" | C. HOT | CU | |
Model 0915.1XL 20773 Copper Reducer, FTG x P, 4" x 2"[1][G] | 4" x 2" | C. HOT | CU | |
Model 0915.1XL 20778 Copper Reducer, FTG x P, 4" x 2 1/2"[1][G] | 2 1/2" | C. HOT | CU | |
Model 0915.1XL 20783 Copper Reducer, FTG x P, 4" x 3"[1][G] | 3" | C. HOT | CU | |
Model 0915.1XL 20813 Copper Reducer, FTG x P, 2 1/2" x 1 1/2"[1][G] | 2 1/2" x 1 1/2" | C. HOT | CU | |
Model 0915.1XL 20814 Copper Reducer, FTG x P, 2 1/2" x 1"[1][G] | 2 1/2" x 1" | C. HOT | CU | |
Model 0915.1XL 20815 Copper Reducer, FTG x P, 2 1/2" x 1 1/4"[1][G] | 2 1/2" x 1 1/4" | C. HOT | CU | |
Model 0915.1XL 20817 Copper Reducer, FTG x P, 3" x 1 1/4"[1][G] | 3" x 1 1/4" | C. HOT | CU | |
Model 0915.1XL 20818 Copper Reducer, FTG x P, 3" x 1 1/2"[1][G] | 3" x 1 1/2" | C. HOT | CU | |
Model 0915.2XL 20685 Copper Reducer, P x P, 2 1/2" x 1"[1][G] | 2 1/2" x 1" | C. HOT | CU | |
Model 0915.2XL 20690 Copper Reducer, P x P, 2 1/2" x 1 1/4"[1][G] | 2 1/2" x 1 1/4" | C. HOT | CU | |
Model 0915.2XL 20695Copper Reducer, P x P, 2 1/2" x 1 1/2"[1][G] | 2 1/2" x 1 1/2" | C. HOT | CU | |
Model 0915.2XL 20700 Copper Reducer, P x P, 2 1/2" x 2"[1][G] | 2 1/2" x 2" | C. HOT | CU | |
Model 0915.2XL 20705 Copper Reducer, P x P, 3" x 1 1/2"[1][G] | 3" x 1 1/2" | C. HOT | CU | |
Model 0915.2XL 20710 Copper Reducer, P x P, 3" x 2"[1][G] | 3" x 2" | C. HOT | CU | |
Model 0915.2XL 20715 Copper Reducer, P x P, 3" x 2 1/2"[1][G] | 3" x 2 1/2" | C. HOT | CU | |
Model 0915.2XL 20720 Copper Reducer, P x P, 4" x 2"[1][G] | 4" x 2" | C. HOT | CU | |
Model 0915.2XL 20725 Copper Reducer, P x P, 4" x 2 1/2"[1][G] | 4" x 2 1/2" | C. HOT | CU | |
Model 0915.2XL 20730 Copper Reducer, P x P, 4" x 3"[1][G] | 4" x 3" | C. HOT | CU | |
Model 0915.5XL 20743 Copper Coupling - No Stop, P x P, 2 1/2"[1][G] | 2 1/2" | C. HOT | CU | |
Model 0915.5XL 20748 Copper Coupling - No Stop, P x P, 3"[1][G] | 3" | C. HOT | CU | |
Model 0915.5XL 20753 Copper Coupling - No Stop, P x P, 4"[1][G] | 4" | C. HOT | CU | |
Model 0915XL 20728 Copper Coupling w/Stop, P x P, 2 1/2"[1][G] | 2 1/2" | C. HOT | CU | |
Model 0915XL 20733 Copper Coupling w/Stop, P x P, 3"[1][G] | 3" | C. HOT | CU | |
Model 0915XL 20738 Copper Coupling w/Stop, P x P, 4"[1][G] | 4" | C. HOT | CU | |
Model 0916 XL 20623 Copper Elbow 90°, P x P, 2 1/2"[1][G] | 2 1/2" | C. HOT | CU | |
Model 0916 XL 20628 Copper Elbow 90°, P x P, 3"[1][G] | 3" | C. HOT | CU | |
Model 0916 XL 20633 Copper Elbow 90°, P x P, 4"[1][G] | 4" | C. HOT | CU | |
Model 0916.1XL 20638 Copper Elbow 90°, FTG x P, 2 1/2"[1][G] | 2 1/2" | C. HOT | CU | |
Model 0916.1XL 20643 Copper Elbow 90°, FTG x P, 3"[1][G] | 3" | C. HOT | CU | |
Model 0916.1XL 20648 Copper Elbow 90°, FTG x P, 4"[1][G] | 4" | C. HOT | CU | |
Model 0917.2XL 20868 Copper Tee, P xP x F NPT, 4" x 4" x 2"[1][G] | 4" x 4" x 2" | C. HOT | CU | |
Model 0917.2XL 20873 Copper Tee, P xP x F NPT, 4" x 4" x 3/4"[1][G] | 4" x 4" x 3/4" | C. HOT | CU | |
Model 0917.2XL 20878 Copper Tee, P xP x F NPT, 2 1/2" x 2 1/2" x 2"[1][G] | 2 1/2" x 2 1/2" x 2" | C. HOT | CU | |
Model 0917.2XL 20883 Copper Tee, P xP x F NPT, 2 1/2" x 2 1/2" x 3/4"[1][G] | 2 1/2"x2 1/2"x 3/4 | C. HOT | CU | |
Model 0917.2XL 20888 Copper Tee, P xP x F NPT, 3" x 3" x 2"[1][G] | 3" x 3" x 2" | C. HOT | CU | |
Model 0917.2XL 20893 Copper Tee, P xP x F NPT, 3" x 3" x 3/4[1][G] | 3" x 3" x 3/4 | C. HOT | CU | |
Model 0918XL 20683 Copper Tee, P x P x P, 2 1/2"[1][G] | 2 1/2" | C. HOT | CU | |
Model 0918XL 20684 Copper Tee, P x P x P, 2 1/2" x 3/4" x 2 1/2"[1][G] | 2 1/2"x3/4"x2 1/2" | C. HOT | CU | |
Model 0918XL 20688 Copper Tee, P x P x P, 2 1/2" x 2 1/2" x 2"[1][G] | 2 1/2" x 2 1/2" x 2" | C. HOT | CU | |
Model 0918XL 20689 Copper Tee, P x P x P, 2 1/2" x 1" x 2 1/2"[1][G] | 2 1/2" x 1" x 2 1/2" | C. HOT | CU | |
Model 0918XL 20693 Copper Tee, P x P x P, 3"[1][G] | 3" | C. HOT | CU | |
Model 0918XL 20694 Copper Tee, P x P x P, 2 1/2" x 1 1/4" x 2 1/2"[1][G] | 2 1/2"x1 1/4"x2 1/2" | C. HOT | CU | |
Model 0918XL 20698 Copper Tee, P x P x P, 3" x 3" x 2"[1][G] | 3" x 3" x 2" | C. HOT | CU | |
Model 0918XL 20699 Copper Tee, P x P x P, 2 1/2" x 1 1/2" x 2 1/2"[1][G] | 2 1/2"x1 1/2"x2 1/2" | C. HOT | CU | |
Model 0918XL 20703 Copper Tee, P x P x P, 3" x 3" x 2 1/2"[1][G] | 3" x 3" x 2 1/2" | C. HOT | CU | |
Model 0918XL 20704 Copper Tee, P x P x P, 2 1/2" x 2" x 3/4"[1][G] | 2 1/2" x 2" x 3/4" | C. HOT | CU | |
Model 0918XL 20708 Copper Tee, P x P x P, 4"[1][G] | 4" | C. HOT | CU | |
Model 0918XL 20709 Copper Tee, P x P x P, 2 1/2" x 2" x 1"[1][G] | 2 1/2" x 2" x 1" | C. HOT | CU | |
Model 0918XL 20713 Copper Tee, P x P x P, 4" x 4" x 2"[1][G] | 4" x 4" x 2" | C. HOT | CU | |
Model 0918XL 20714 Copper Tee, P x P x P, 2 1/2" x 2" x 2 1/2"[1][G] | 2 1/2"x2"x2"x2 1/2" | C. HOT | CU | |
Model 0918XL 20718 Copper Tee, P x P x P, 4" x 4" x 2 1/2"[1][G] | 4" x 4" x 2 1/2" | C. HOT | CU | |
Model 0918XL 20719 Copper Tee, P x P x P, 3" x 3/4" x 3" [1][G] | 3" x 3/4" x 3" | C. HOT | CU | |
Model 0918XL 20723 Copper Tee, P x P x P, 4" x 4" x 3"[1][G] | 4" x 4" x 3" | C. HOT | CU | |
Model 0918XL 20724 Copper Tee, P x P x P, 3" x 1" x 3"[1][G] | 3" x 1" x 3" | C. HOT | CU | |
Model 0918XL 20727 Copper Tee, P x P x P, 3" x 1 1/2" x 3"[1][G] | 3" x 1 1/2" x 3" | C. HOT | CU | |
Model 0918XL 20729 Copper Tee, P x P x P, 3" x 1 1/4" x 3"[1][G] | 3" x 1 1/4" x 3" | C. HOT | CU | |
Model 0918XL 20732 Copper Tee, P x P x P, 3" x 2" x 2"[1][G] | 3" x 2" x 2" | C. HOT | CU | |
Model 0918XL 20734 Copper Tee, P x P x P, 3" x 2" x 2 1/2"[1][G] | 3" x 2" x 2 1/2" | C. HOT | CU | |
Model 0918XL 20739 Copper Tee, P x P x P, 3" x 2" x 3"[1][G] | 3" x 2" x 3" | C. HOT | CU | |
Model 0918XL 20744 Copper Tee, P x P x P, 3" x 2 1/2" x 2"[1][G] | 3" x 2 1/2" x 2" | C. HOT | CU | |
Model 0918XL 20749 Copper Tee, P x P x P, 3" x 2 1/2" x 2 1/2"[1][G] | 3" x 2 1/2" x 2 1/2" | C. HOT | CU | |
Model 0918XL 20754 Copper Tee, P x P x P, 3" x 2 1/2" x 3"[1][G] | 3" x 2 1/2" x 3" | C. HOT | CU | |
Model 0918XL 20759 Copper Tee, P x P x P, 3" x 3" x 1/2"[1][G] | 3" x 3" x 1/2" | C. HOT | CU | |
Model 0918XL 20774 Copper Tee, P x P x P, 4" x 3" x 2"[1][G] | 4" x 3" x 2" | C. HOT | CU | |
Model 0918XL 20784 Copper Tee, P x P x P, 4" x 3" x 3"[1][G] | 4" x 3" x 3" | C. HOT | CU | |
Model 0918XL 20788 Copper Tee, P x P x P, 4" x 4" x 1/2"[1][G] | 4" x 4" x 1/2" | C. HOT | CU | |
Model 0918XL 20793 Copper Tee, P x P x P, 4" x 4" x 3/4"[1][G] | 4" x 4" x 3/4" | C. HOT | CU | |
Model 0918XL 20794 Copper Tee, P x P x P, 4" x 4" x 1"[1][G] | 4" x 4" x 1" | C. HOT | CU | |
Model 0918XL 20795 Copper Tee, P x P x P, 4" x 4" x 1 1/4"[1][G] | 4" x 4" x 1 1/4" | C. HOT | CU | |
Model 0918XL 20798 Copper Tee, P x P x P, 3" x 3" x 1 1/2"[1][G] | 3" x 3" x 1 1/2" | C. HOT | CU | |
Model 0918XL 20803 Copper Tee, P x P x P, 2 1/2" x 2 1/2" x 1 1/2"[1][G] | 2 1/2"x2 1/2"x1 1/2" | C. HOT | CU | |
Model 0918XL 20808 Copper Tee, P x P x P, 4" x 4" x 1 1/2"[1][G] | 4" x 4" x 1 1/2" | C. HOT | CU | |
Model 0918XL 22278 Copper Tee, P x P x P, 2 1/2" x 2" x 2"[1][G] | 2 1/2" x 2" x 2" | C. HOT | CU | |
Model 0918XL 22283 Copper Tee, P x P x P, 2 1/2" x 2" x 1 1/2"[1][G] | 2 1/2" x 2" x 1 1/2" | C. HOT | CU | |
Model 0918XL 22293 Copper Tee, P x P x P, 2 1/2" x 2 1/2" x 1"[1][G] | 2 1/2" x 2 1/2" x 1" | C. HOT | CU | |
Model 0918XL 22298 Copper Tee, P x P x P, 2 1/2" x 2 1/2" x 3/4"[1][G] | 2 1/2"x2 1/2"x3/4" | C. HOT | CU | |
Model 0918XL 22303 Copper Tee, P x P x P, 2 1/2" x 2 1/2" x 1/2"[1][G] | 2 1/2"x2 1/2"x1/2" | C. HOT | CU | |
Model 0918XL 22308 Copper Tee, P x P x P, 3" x 3" x 1"[1][G] | 3" x 3" x 1" | C. HOT | CU | |
Model 0918XL 22309 Copper Tee, P x P x P, 2 ½ x 2 ½ x ¾"[1][G] | 2 ½ x 2 ½ x ¾" | C. HOT | CU | |
Model 0918XL 22310 Copper Tee, P x P x P, 3 x 3 x ¾"[1][G] | 3 x 3 x ¾" | C. HOT | CU | |
Model 0918XL 22311 Copper Tee, P x P x P, 2 ½ x 2 ½ x ½"[1][G] | 2 ½ x 2 ½ x ½" | C. HOT | CU | |
Model 0918XL 22312 Copper Tee, P x P x P, 4 x 4 x ¾"[1][G] | 4 x 4 x ¾" | C. HOT | CU | |
Model 0918XL 22313 Copper Tee, P x P x P, 3" x 3" x 1 1/4"[1][G] | 3" x 3" x 1 1/4" | C. HOT | CU | |
Model 0918XL 22314 Copper Tee, P x P x P, 4 x 4 x ½"[1][G] | 4 x 4 x ½" | C. HOT | CU | |
Model 0918XL 22315 Copper Tee, P x P x P, 3 x 3 x ½"[1][G] | 3 x 3 x ½" | C. HOT | CU | |
Model 0918XL 22316 Copper Tee, P x P x P, 2 1/2 x 2 x 3/4"[1][G] | 2 1/2 x 2 x 3/4" | C. HOT | CU | |
Model 0918XL 22317 Copper Tee, P x P x P, 2 1/2 x 3/4 x 2 1/2"[1][G] | 2 1/2 x 3/4 x 2 1/2" | C. HOT | CU | |
Model 0918XL 22318 Copper Tee, P x P x P, 3 x 3/4 x 3"[1][G] | 3 x 3/4 x 3" | C. HOT | CU | |
Model 0918XL 22323 Copper Tee, P x P x P, 3" x 3" x 3/4"[1][G] | 3" x 3" x 3/4" | C. HOT | CU | |
Model 0926.1XL 20668, Copper Elbow 45°, FTG x P, 2 1/2"[1][G] | 2 1/2" | C. HOT | CU | |
Model 0926.1XL 20673 Copper Elbow 45°, FTG x P, 3"[1][G] | 3" | C. HOT | CU | |
Model 0926.1XL 20678 Copper Elbow 45°, FTG x P, 4"[1][G] | 4" | C. HOT | CU | |
Model 0926XL 20653 Copper Elbow 45°, P x P, 2 1/2"[1][G] | 2 1/2" | C. HOT | CU | |
Model 0926XL 20658 Copper Elbow 45°, P x P, 3"[1][G] | 3" | C. HOT | CU | |
Model 0926XL 20663 Copper Elbow 45°, P x P, 4"[1][G] | 4" | C. HOT | CU | |
Model 0956XL 20833 Copper Cap, P, 2 1/2"[1][G] | 2 1/2" | C. HOT | CU | |
Model 0956XL 20843 Copper Cap, P, 3"[1][G] | 3" | C. HOT | CU | |
Model 0956XL 20848 Copper Cap, P, 4"[1][G] | 4" | C. HOT | CU | |
Model 0959.5XL 20853 Copper Adapter Flange, Flange x P, 2 1/2"[1][G] | 2 1/2" | C. HOT | CU | |
Model 0959.5XL 20858 Copper Adapter Flange, Flange x P, 3"[1][G] | 3" | C. HOT | CU | |
Model 0959.5XL 20863 Copper Adapter Flange, Flange x P, 4"[1][G] | 4" | C. HOT | CU | |
Model 2915 78047 / 77440 / 77220 ProPress Copper Coupling w/ Stop, P x P, 1/2"[1][G] | 1/2" | C. HOT | CU | |
Model 2915 78052 / 77435 / 77215 ProPress Copper Coupling w/ Stop, P x P, 3/4"[1][G] | 3/4" | C. HOT | CU | |
Model 2915 78057 / 77431 ProPress Copper Coupling w/ Stop, P x P, 1"[1][G] | 1" | C. HOT | CU | |
Model 2915 78062 ProPress Copper Coupling w/ Stop, P x P, 1 1/4"[1][G] | 1 1/4" | C. HOT | CU | |
Model 2915 78067 ProPress Copper Coupling w/ Stop, P x P, 1 1/2"[1][G] | 1 1/2" | C. HOT | CU | |
Model 2915 78072 ProPress Copper Coupling w/ Stop, P x P, 2"[1][G] | 2" | C. HOT | CU | |
Model 2915.1 14543 ProPress Copper Reducer, FTG x P, 1 1/2" x 3/4"[1][G] | 1 1/2" x 3/4" | C. HOT | CU | |
Model 2915.1 22333 ProPress Copper Reducer, FTG x P, 1 1/4" x 1/2"[1][G] | 1 1/4" x 1/2" | C. HOT | CU | |
Model 2915.1 78077 ProPress Copper Reducer, FTG x P, 3/4" x 1/2"[1][G] | 3/4" x 1/2" | C. HOT | CU | |
Model 2915.1 78082 ProPress Copper Reducer, FTG x P, 1" x 1/2"[1][G] | 1" x 1/2" | C. HOT | CU | |
Model 2915.1 78087 ProPress Copper Reducer, FTG x P, 1" x 3/4"[1][G] | 1" x 3/4" | C. HOT | CU | |
Model 2915.1 78092 ProPress Copper Reducer, FTG x P, 1 1/4" x 3/4"[1][G] | 1 1/4" x 3/4" | C. HOT | CU | |
Model 2915.1 78097 ProPress Copper Reducer, FTG x P, 1 1/4" x 1"[1][G] | 1 1/4" x 1" | C. HOT | CU | |
Model 2915.1 78102 ProPress Copper Reducer, FTG x P, 1 1/2" x 1"[1][G] | 1 1/2" x 1" | C. HOT | CU | |
Model 2915.1 78107 ProPress Copper Reducer, FTG x P, 1 1/2" x 1 1/4"[1][G] | 1 1/2" x 1 1/4" | C. HOT | CU | |
Model 2915.1 78112 ProPress Copper Reducer, FTG x P, 2" x 1"[1][G] | 2" x 1" | C. HOT | CU | |
Model 2915.1 78117 ProPress Copper Reducer, FTG x P, 2" x 1 1/4"[1][G] | 2" x 1 1/4" | C. HOT | CU | |
Model 2915.1 78122 ProPress Copper Reducer, FTG x P, 2" x 1 1/2"[1][G] | 2" x 1 1/2" | C. HOT | CU | |
Model 2915.2 15588 ProPress Copper Reducer, P x P, 1 1/2" x 1"[1][G] | 1 1/2" x 1" | C. HOT | CU | |
Model 2915.2 15593 ProPress Copper Reducer, P x P, 1 1/4" x 3/4"[1][G] | 1 1/4" x 3/4" | C. HOT | CU | |
Model 2915.2 15603 ProPress Copper Reducer, P x P, 1" x 1/2"[1][G] | 1" x 1/2" | C. HOT | CU | |
Model 2915.2 15608 ProPress Copper Reducer, P x P, 2" x 1"[1][G] | 2" x 1" | C. HOT | CU | |
Model 2915.2 18468 ProPress Copper Reducer, P x P, 2" x 3/4"[1][G] | 2" x 3/4" | C. HOT | CU | |
Model 2915.2 18473 ProPress Copper Reducer, P x P, 1 1/2" x 3/4"[1][G] | 1 1/2" x 3/4" | C. HOT | CU | |
Model 2915.2 22328 ProPress Copper Reducer, P x P, 2" x 1 1/4"[1][G] | 2" x 1 1/4" | C. HOT | CU | |
Model 2915.2 78147 / 77270 ProPress Copper Reducer, P x P, 3/4" x 1/2"[1][G] | 3/4" x 1/2" | C. HOT | CU | |
Model 2915.2 78152 / 77305 ProPress Copper Reducer, P x P, 1" x 3/4"[1][G] | 1" x 3/4" | C. HOT | CU | |
Model 2915.2 78157 ProPress Copper Reducer, P x P, 1 1/4" x 1"[1][G] | 1 1/4" x 1" | C. HOT | CU | |
Model 2915.2 78162 ProPress Copper Reducer, P x P, 1 1/2" x 1 1/4"[1][G] | 1 1/2" x 1 1/4" | C. HOT | CU | |
Model 2915.2 78167 ProPress Copper Reducer, P x P, 2" x 1 1/2"[1][G] | 2" x 1 1/2" | C. HOT | CU | |
Model 2915.3 78172/77480/77255 ProPress Copper Coupling - No Stop, P x P, 1/2"[1][G] | 1/2" | C. HOT | CU | |
Model 2915.3 78177/77475/77250 ProPress Copper Coupling - No Stop, P x P, 3/4"[1][G] | 3/4" | C. HOT | CU | |
Model 2915.3 78182 / 77495 ProPress Copper Coupling - No Stop, P x P, 1"[1][G] | 1" | C. HOT | CU | |
Model 2915.3 78187 ProPress Copper Coupling - No Stop, P x P, 1 1/4"[1][G] | 1 1/4" | C. HOT | CU | |
Model 2915.3 78192 ProPress Copper Coupling - No Stop, P x P, 1 1/2"[1][G] | 1 1/2" | C. HOT | CU | |
Model 2915.3 78197 ProPress Copper Coupling - No Stop, P x P, 2"[1][G] | 2" | C. HOT | CU | |
Model 2915.5 79005 ProPress Copper Coupling - Extended, No Stop, P x P, 1/2"[1][G] | 1/2" | C. HOT | CU | |
Model 2915.5 79010 ProPress Copper Coupling - Extended, No Stop, P x P, 3/4"[1][G] | 3/4" | C. HOT | CU | |
Model 2915.5 79015 ProPress Copper Coupling - Extended, No Stop, P x P, 1"[1][G] | 1" | C. HOT | CU | |
Model 2915.5 79020 ProPress Copper Coupling - Extended, No Stop, P x P, 1 1/4"[1][G] | 1 1/4" | C. HOT | CU | |
Model 2915.5 79025 ProPress Copper Coupling - Extended, No Stop, P x P, 1 1/2"[1][G] | 1 1/2" | C. HOT | CU | |
Model 2915.5 79030 ProPress Copper Coupling - Extended, No Stop, P x P, 2"[1][G] | 2" | C. HOT | CU | |
Model 2916 77022 / 77420 / 77200 ProPress Copper Elbow 90°, P x P, 3/4"[1][G] | 3/4" | C. HOT | CU | |
Model 2916 77027 / 77430 / 77210 ProPress Copper Elbow 90°, P x P, 1"[1][G] | 1" | C. HOT | CU | |
Model 2916 77032 ProPress Copper Elbow 90°, P x P, 1 1/4"[1][G] | 1 1/4" | C. HOT | CU | |
Model 2916 77037 ProPress Copper Elbow 90°, P x P, 1 1/2"[1][G] | 1 1/2" | C. HOT | CU | |
Model 2916 77042 ProPress Copper Elbow 90°, P x P, 2"[1][G] | 2" | C. HOT | CU | |
Model 2916 77317 / 77425 / 77205 ProPress Copper Elbow 90°, P x P, 1/2"[1][G] | 1/2" | C. HOT | CU | |
Model 2916.1 77052 / 77408 ProPress Copper Elbow 90°, FTG x P, 3/4"[1][G] | 3/4" | C. HOT | CU | |
Model 2916.1 77057 ProPress Copper Elbow 90°, FTG x P, 1"[1][G] | 1" | C. HOT | CU | |
Model 2916.1 77062 ProPress Copper Elbow 90°, FTG x P, 1 1/4"[1][G] | 1 1/4" | C. HOT | CU | |
Model 2916.1 77067 ProPress Copper Elbow 90°, FTG x P, 1 1/2"[1][G] | 1 1/2" | C. HOT | CU | |
Model 2916.1 77072 ProPress Copper Elbow 90°, FTG x P, 2"[1][G] | 2" | C. HOT | CU | |
Model 2916.1 77347 / 77406 ProPress Copper Elbow 90°, FTG x P, 1/2"[1][G] | 1/2" | C. HOT | CU | |
Model 2916.3 77325 ProPress Copper Reducing Elbow 90°, P x P, 3/4" x 1/2"[1][G] | 3/4" x 1/2" | C. HOT | CU | |
Model 2916.3 77330 ProPress Copper Reducing Elbow 90°, P x P, 1" x 3/4"[1][G] | 1" x 3/4" | C. HOT | CU | |
Model 2918 14568 ProPress Copper Tee, P x P x P, 1 1/4" x 1" x 1"[1][G] | 1 1/4" x 1" x 1" | C. HOT | CU | |
Model 2918 15448 ProPress Copper Tee, P x P x P, 1 1/2" x 1 1/2" x 1/2"[1][G] | 1 1/2"x1 1/2"x1/2" | C. HOT | CU | |
Model 2918 15453 ProPress Copper Tee, P x P x P, 1 1/2" x 1 1/4" x 1"[1][G] | 1 1/2" x 1 1/4" x 1" | C. HOT | CU | |
Model 2918 15458 ProPress Copper Tee, P x P x P, 1 1/2" x 1" x 1"[1][G] | 1 1/2" x 1" x 1" | C. HOT | CU | |
Model 2918 15463 ProPress Copper Tee, P x P x P, 1 1/2" x 1" x 1 1/2"[1][G] | 1 1/2" x 1" x 1 1/2" | C. HOT | CU | |
Model 2918 15483 ProPress Copper Tee, P x P x P, 1 1/2" x 1 1/4" x 1 1/4"[1][G] | 1 1/2"x1 1/4"x1 1/4" | C. HOT | CU | |
Model 2918 15488 ProPress Copper Tee, P x P x P, 1" x 1" x 1 1/4"[1][G] | 1" x 1" x 1 1/4" | C. HOT | CU | |
Model 2918 15493 ProPress ProPress Copper Tee, P x P x P, 1/2" x 1/2" x 1"[1][G] | 1/2" x 1/2" x 1" | C. HOT | CU | |
Model 2918 15498 ProPress Copper Tee, P x P x P, 2" x 1 1/2" x 1"[1][G] | 2" x 1 1/2" x 1" | C. HOT | CU | |
Model 2918 15503 ProPress Copper Tee, P x P x P, 2" x 1 1/2" x 1 1/2"[1][G] | 2" x 1 1/2" x 1 1/2" | C. HOT | CU | |
Model 2918 15508 ProPress Copper Tee, P x P x P, 2" x 1 1/2" x 1 1/4"[1][G] | 2" x 1 1/2" x 1 1/4" | C. HOT | CU | |
Model 2918 15513 ProPress Copper Tee, P x P x P, 2" x 1 1/2" x 3/4"[1][G] | 2" x 1 1/2" x 3/4" | C. HOT | CU | |
Model 2918 15518 ProPress Copper Tee, P x P x P, 2" x 1 1/4" x 1 1/4"[1][G] | 2" x 1 1/4" x 1 1/4" | C. HOT | CU | |
Model 2918 15538 ProPress Copper Tee, P x P x P, 2" x 2" x 1/2"[1][G] | 2" x 2" x 1/2" | C. HOT | CU | |
Model 2918 22228 ProPress Copper Tee, P x P x P, 2" x 1 1/2" x 2"[1][G] | 2" x 1 1/2" x 2" | C. HOT | CU | |
Model 2918 22233 ProPress Copper Tee, P x P x P, 1 1/2" x 1 1/4" x 3/4"[1][G] | 1 1/2"x1 1/4"x3/4" | C. HOT | CU | |
Model 2918 22238 ProPress Copper Tee, P x P x P, 1 1/4" x 1" x 1/2"[1][G] | 1 1/4" x 1" x 1/2" | C. HOT | CU | |
Model 2918 22243 ProPress Copper Tee, P x P x P, 1 1/4" x 3/4" x 1/2"[1][G] | 1 1/4" x 3/4" x 1/2" | C. HOT | CU | |
Model 2918 22248 ProPress Copper Tee, P x P x P, 1 1/4" x 3/4" x 1 1/4"[1][G] | 1 1/4"x3/4"x1 1/4" | C. HOT | CU | |
Model 2918 22253 ProPress Copper Tee, P x P x P, 1 1/4" x 1/2" x 1 1/4"[1][G] | 1 1/4"x1/2"x1 1/4" | C. HOT | CU | |
Model 2918 22258 ProPress Copper Tee, P x P x P, 1 1/4" x 3/4" x 3/4"[1][G] | 1 1/4" x 3/4" x 3/4" | C. HOT | CU | |
Model 2918 22263 ProPress ProPress Copper Tee, P x P x P, 1" x 1/2" x 3/4"[1][G] | 1" x 1/2" x 3/4" | C. HOT | CU | |
Model 2918 22268 ProPress Copper Tee, P x P x P, 1 1/4" x 3/4" x 1"[1][G] | 1 1/4" x 3/4" x 1" | C. HOT | CU | |
Model 2918 77377 / 77465 / 77234 ProPress ProPress Copper Tee, P x P x P, 1/2"[1][G] | 1/2" | C. HOT | CU | |
Model 2918 77382 ProPress ProPress Copper Tee, P x P x P, 1/2" x 1/2" x 3/4"[1][G] | 1/2" x 1/2" x 3/4" | C. HOT | CU | |
Model 2918 77387 / 77460 / 77230 ProPress ProPress Copper Tee, P x P x P, 3/4"[1][G] | 3/4" | C. HOT | CU | |
Model 2918 77392 / 77315 ProPress Copper Tee, P x P x P, 3/4" x 1/2" x 1/2"[1][G] | 3/4" x 1/2" x 1/2" | C. HOT | CU | |
Model 2918 77397 / 77320 ProPress Copper Tee, P x P x P, 3/4" x 1/2" x 3/4"[1][G] | 3/4" x 1/2" x 3/4" | C. HOT | CU | |
Model 2918 77402 / 77265 ProPress Copper Tee, P x P x P, 3/4" x 3/4" x 1/2"[1][G] | 3/4" x 3/4" x 1/2" | C. HOT | CU | |
Model 2918 77407 ProPress ProPress Copper Tee, P x P x P, 3/4" x 3/4" x 1"[1][G] | 3/4" x 3/4" x 1" | C. HOT | CU | |
Model 2918 77412 / 77470 / 77285 ProPress Copper Tee, P x P x P, 1"[1][G] | 1" | C. HOT | CU | |
Model 2918 77417 ProPress ProPress Copper Tee, P x P x P, 1" x 3/4" x 1/2"[1][G] | 1" x 3/4" x 1/2" | C. HOT | CU | |
Model 2918 77422 / 77335 ProPress Copper Tee, P x P x P, 1" x 3/4" x 3/4"[1][G] | 1" x 3/4" x 3/4" | C. HOT | CU | |
Model 2918 77427 / 77355 ProPress Copper Tee, P x P x P, 1" x 3/4" x 1"[1][G] | 1" x 3/4" x 1" | C. HOT | CU | |
Model 2918 77432 / 79321 ProPress Copper Tee, P x P x P, 1" x 1" x 1/2"[1][G] | 1" x 1" x 1/2" | C. HOT | CU | |
Model 2918 77437 / 77295 ProPress Copper Tee, P x P x P, 1" x 1" x 3/4"[1][G] | 1" x 1" x 3/4" | C. HOT | CU | |
Model 2918 77442 ProPress Copper Tee, P x P x P, 1 1/4"[1][G] | 1 1/4" | C. HOT | CU | |
Model 2918 77447 ProPress Copper Tee, P x P x P, 1 1/4" x 1 1/4" x 1"[1][G] | 1 1/4" x 1 1/4" x 1" | C. HOT | CU | |
Model 2918 77452 ProPress Copper Tee, P x P x P, 1 1/4" x 1 1/4" x 3/4"[1][G] | 1 1/4"x1 1/4"x3/4" | C. HOT | CU | |
Model 2918 77457 ProPress Copper Tee, P x P x P, 1 1/2"[1][G] | 1 1/2" | C. HOT | CU | |
Model 2918 77462 ProPress Copper Tee, P x P x P, 1 1/2" x 1 1/2" x 3/4"[1][G] | 1 1/2"x1 1/2"x3/4" | C. HOT | CU | |
Model 2918 77467 ProPress Copper Tee, P x P x P, 1 1/2" x 1 1/2" x 1"[1][G] | 1 1/2" x 1 1/2" x 1" | C. HOT | CU | |
Model 2918 77472 ProPress Copper Tee, P x P x P, 1 1/2" x 1 1/2" x 1 1/4"[1][G] | 1 1/2"x1 1/2"x1 1/4" | C. HOT | CU | |
Model 2918 77477 ProPress Copper Tee, P x P x P, 2"[1][G] | 2" | C. HOT | CU | |
Model 2918 77482 ProPress Copper Tee, P x P x P, 2" x 2" x 1 1/2"[1][G] | 2" x 2" x 1 1/2" | C. HOT | CU | |
Model 2918 77487 ProPress Copper Tee, P x P x P, 2" x 2" x 1 1/4"[1][G] | 2" x 2" x 1 1/4" | C. HOT | CU | |
Model 2918 79660 ProPress Copper Tee, P x P x P, 1 1/2" x 1" x 3/4"[1][G] | 1 1/2" x 1" x 3/4" | C. HOT | CU | |
Model 2918 94757 ProPress Copper Tee, P x P x P, 1 1/4" x 1 1/4" x 1/2"[1][G] | 1 1/4"x1 1/4"x1/2" | C. HOT | CU | |
Model 2918 94762 ProPress Copper Tee, P x P x P, 1 1/4" x 1" x 3/4"[1][G] | 1 1/4" x 1" x 3/4" | C. HOT | CU | |
Model 2918 94767 ProPress ProPress Copper Tee, P x P x P, 1" x 1/2" x 1"[1][G] | 1" x 1/2" x 1" | C. HOT | CU | |
Model 2918 94772 ProPress Copper Tee, P x P x P, 2" x 2" x 1"[1][G] | 2" x 2" x 1" | C. HOT | CU | |
Model 2918 94777 ProPress Copper Tee, P x P x P, 2" x 2" x 3/4"[1][G] | 2" x 2" x 3/4" | C. HOT | CU | |
Model 2926 77023 / 77240 ProPress Copper Elbow 45°, P x P, 3/4"[1][G] | 3/4" | C. HOT | CU | |
Model 2926 77028 / 77275 ProPress Copper Elbow 45°, P x P, 1"[1][G] | 1" | C. HOT | CU | |
Model 2926 77033 ProPress Copper Elbow 45°, P x P, 1 1/4"[1][G] | 1 1/4" | C. HOT | CU | |
Model 2926 77038 ProPress Copper Elbow 45°, P x P, 1 1/2"[1][G] | 1 1/2" | C. HOT | CU | |
Model 2926 77043 ProPress Copper Elbow 45°, P x P, 2"[1][G] | 2" | C. HOT | CU | |
Model 2926 77607 / 77245 ProPress Copper Elbow 45°, P x P, 1/2"[1][G] | 1/2" | C. HOT | CU | |
Model 2926.1 77053 ProPress Copper Elbow 45°, FTG x P, 3/4"[1][G] | 3/4" | C. HOT | CU | |
Model 2926.1 77058 ProPress Copper Elbow 45°, FTG x P, 1"[1][G] | 1" | C. HOT | CU | |
Model 2926.1 77063 ProPress Copper Elbow 45°, FTG x P, 1 1/4"[1][G] | 1 1/4" | C. HOT | CU | |
Model 2926.1 77068 ProPress Copper Elbow 45°, FTG x P, 1 1/2"[1][G] | 1 1/2" | C. HOT | CU | |
Model 2926.1 77073 ProPress Copper Elbow 45°, FTG x P, 2"[1][G] | 2" | C. HOT | CU | |
Model 2926.1 77637 ProPress Copper Elbow 45°, FTG x P, 1/2"[1][G] | 1/2" | C. HOT | CU | |
Model 2928 77742 ProPress Copper Cross-Over, P x P, 1/2"[1][G] | 1/2" | C. HOT | CU | |
Model 2928 77747 ProPress Copper Cross-Over, P x P, 3/4"[1][G] | 3/4" | C. HOT | CU | |
Model 2956 77712 / 77445 / 77225 ProPress Copper Cap, P, 1/2"[1][G] | 1/2" | C. HOT | CU | |
Model 2956 77717 / 77450 / 77260 ProPress Copper Cap, P, 3/4"[1][G] | 3/4" | C. HOT | CU | |
Model 2956 77722 / 77455 / 77300 ProPress Copper Cap, P, 1"[1][G] | 1" | C. HOT | CU | |
Model 2956 77727 ProPress Copper Cap, P, 1 1/4"[1][G] | 1 1/4" | C. HOT | CU | |
Model 2956 77732 ProPress Copper Cap, P, 1 1/2"[1][G] | 1 1/2" | C. HOT | CU | |
Model 2956 77737 ProPress Copper Cap, P, 2"[1][G] | 2" | C. HOT | CU | |
Model 2975.2 19786 ProPress Copper 90° Stub-Out, FTG x Closed, 1/2"[1][G] | 1/2" | C. HOT | CU | |
Model 2975.2 19791 ProPress Copper 90° Stub-Out, FTG x Closed, 3/4"[1][G] | 3/4" | C. HOT | CU | |
Model 2975.2 19961 ProPress Copper 90° Stub-Out, FTG x Closed, 1"[1][G] | 1" | C. HOT | CU | |
Viega PureFlow Polymer Fittings, MNPT Coupler (V5215.1 43953)[2][3][G] | 1/2" | C. HOT | MLTPL | |
Viega PureFlow Polymer Fittings, MNPT Elbow 90 (V5216.1 43963)[2][3][G] | 1/2" | C. HOT | MLTPL | |
Viega PureFlow Polymer Fittings, MNPT Tee (V5218.2 43966)[2][3][G] | 1/2" | C. HOT | MLTPL | |
[1] Use of this material may not be appropriate in all water chemistries. Copper (tube, pipe, or fitting) may require corrosion control to limit the leaching of copper into drinking water under certain water chemistries. Refer to Informative Annex I-6.1 of NSF/ANSI/CAN 61 for water quality considerations to be used before installing this product.[2] Accepted by NSF for use in residential and commercial construction, including manufactured housing.[3] Product tested and Listed for use with Viega PureFlow, ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and Viega FostaPEX tubing only.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Manifolds | ||||
PEX Press Polymer Manifold 1" PEX Press x ½" PEX Press, 6 outlets,closed (49206)[2][3][G] | 1" x 1/2" | C. HOT | PPSU | |
PEX Press Polymer Manifold 1" PEX Press x ½" PEX Press, 6 outlets,through(49256)[2][3][G] | 1" x 1/2" | C. HOT | PPSU | |
PEX Press Polymer Manifold 1" PEX Press x ½" PEX Press, 8 outlets,through(49258)[2][3][G] | 1" x 1/2" | C. HOT | PPSU | |
PEX Press Polymer Manifold 1"PEX Press x ½"PEX Press, 8 outlets, closed (49208)[2][3][G] | 1" x 1/2" | C. HOT | PPSU | |
PEX Press Polymer Manifold 1"x¾" PEX Pressx½" PEX Press,4 outlets,through(49254)[2][3][G] | 1" x 3/4" x 1/2" | C. HOT | PPSU | |
PEX Press Polymer Manifold ¾" PEX Press x ½" PEX Press, 2 outlets,through(49152)[2][3][G] | 3/4" x 1/2" | C. HOT | PPSU | |
PEX Press Polymer Manifold ¾" PEX Press x ½" PEX Press, 3 outlets,through(49153)[2][3][G] | 3/4" x 1/2" | C. HOT | PPSU | |
PEX Press Polymer Manifold ¾" PEX Press x ½" PEX Press, 4 outlets,closed (49004)[2][3][G] | 3/4" x 1/2" | C. HOT | PPSU | |
PEX Press Polymer Manifold ¾" PEX Press x ½" PEX Press, 4 outlets,through(49054)[2][3][G] | 3/4" x 1/2" | C. HOT | PPSU | |
PollyAlloy Manifold 3/4" PEX Crimp x 1/2" PEX Crimp, 3 outlets, through(65153)[2][3][G] | 3/4" x 1/2" | C. HOT | PPSU | |
PolyAlloy Manifold 1" PEX Crimp x 1/2" PEX Crimp, 6 outlets, closed (65206)[2][3][G] | 1" x 1/2" | C. HOT | PPSU | |
PolyAlloy Manifold 1" PEX Crimp x 1/2" PEX Crimp, 6 outlets, through(65256)[2][3][G] | 1" x 1/2" | C. HOT | PPSU | |
PolyAlloy Manifold 1" PEX Crimp x 1/2" PEX Crimp, 8 outlets, through(65258)[2][3][G] | 1" x 1/2" | C. HOT | PPSU | |
PolyAlloy Manifold 1"x3/4" PEX Crimpx1/2'' PEX Crimp, 4 outlets, through(65254)[2][3][G] | 1" x 3/4" x 1/2" | C. HOT | PPSU | |
PolyAlloy Manifold 3/4" PEX Crimp x 1/2" PEX Crimp, 2 outlets, through(65152)[2][3][G] | 3/4" x 1/2" | C. HOT | PPSU | |
PolyAlloy Manifold 3/4" PEX Crimp x 1/2" PEX Crimp, 4 outlets, closed (65104)[2][3][G] | 3/4" x 1/2" | C. HOT | PPSU | |
PolyAlloy Manifold 3/4" PEX Crimp x 1/2" PEX Crimp, 4 outlets, through(65154)[2][3][G] | 3/4" x 1/2" | C. HOT | PPSU | |
Viega ManaBloc™[2][3][4][5][G] | 3/8" - 1" | D. HOT | MLTPL | |
Viega MiniBloc™[2][3][4][5][G] | 3/8" - 1" | D. HOT | MLTPL | |
[2] Accepted by NSF for use in residential and commercial construction, including manufactured housing.[3] Product tested and Listed for use with Viega PureFlow, ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and Viega FostaPEX tubing only.[4] Configurations Include: Viega ManaBloc MXBD6 1/2" (8 hot, 10 cold) - 18 ports (PN 49615) 1/2" (9 hot, 15 cold) - 24 ports (PN 49620) 1/2" (12 hot, 18 cold) - 30 ports (PN 49625) 1/2" (14 hot, 22 cold) - 36 ports (PN49630) Viega ManaBloc MXBD10 1/2" (10 hot, 16 cold) - 26 ports (PN 49635) 1/2" (13 hot, 19 cold) - 32 ports (PN 49640) 1/2" (14 hot, 22 cold) - 36 ports (PN 49645) PEX Press Polymer ManaBloc 3/8” (6 hot, 8 cold) - 14 ports (PN 49142) 1/2” (6 hot, 8 cold) - 14 ports (PN 49143) 1/2” (8 hot, 10 cold) - 18 ports (PN 49183) 1/2” (9 hot, 15 cold) - 24 ports (PN 49243) 1/2” (12 hot, 18 cold) - 30 ports (PN 49303) 1/2” (14 hot, 22 cold) - 36 ports (PN 49363) 3/8” (6 hot, 7 cold) & 1/2” (2 hot, 3 cold) - 18 ports (PN 49186) 3/8” (7 hot, 11 cold) & 1/2” (2 hot, 4 cold) - 24 ports (PN 49246) 3/8” (10 hot, 12 cold) & 1/2” (2 hot, 6 cold) - 30 ports (PN 49306) 3/8” (11 hot, 15 cold) & 1/2” (3 hot, 7 cold) - 36 ports (PN 49366) PEX Press Polymer MiniBloc 1/2” - 3 ports (PN 49033) 1/2” - 4 ports (PN 49043) 1/2” - 6 ports (PN 49063) 1/2” - 8 ports (PN 49083) 1/2” (2 hot, 3 cold) - 5 ports (PN 49453) 1/2” (3 hot, 4 cold) - 7 ports (PN 49473) 1/2” (4 hot, 6 cold) - 10 ports (PN 49410) PEX Crimp PolyAlloy ManaBloc 3/8” (6 hot, 6 cold) - 12 ports (PN 50244) 3/8” (6 hot, 8 cold) - 14 ports (PN 50142) 3/8” (8 hot, 10 cold) - 18 ports (PN 50245) 3/8” (9 hot, 15 cold) - 24 ports (PN 50247) 3/8” (12 hot, 18 cold) - 30 ports (PN 50248) 3/8” (14 hot, 22 cold) - 36 ports (PN 50249) 1/2” (6 hot, 8 cold) - 14 ports (PN 50143) 1/2'' (6 hot, 8 cold) - 14 ports (PN 50144) 1/2” (8 hot, 10 cold) - 18 ports (PN 50250) 1/2” (9 hot, 15 cold) - 24 ports (PN 50243) 1/2” (12 hot, 18 cold) - 30 ports (PN 50303) 1/2” (14 hot, 22 cold) - 36 ports (PN 50363) 3/8” (6 hot, 7 cold) & 1/2” (2 hot, 3 cold) - 18 ports (PN 51618) 3/8” (7 hot, 11 cold) & 1/2” (2 hot, 4 cold) - 24 ports (PN 50624) 3/8” (10 hot, 12 cold) & 1/2” (2 hot, 6 cold) - 30 ports (PN 50630) 3/8” (11 hot, 15 cold) & 1/2” (3 hot, 7 cold) - 36 ports (PN 50636) PEX Crimp PolyAlloy MiniBloc 3/8” - (4 cold) - 4 ports (PN 50021) 3/8” - (6 cold) - 6 ports (PN 50022) 3/8” - (8 cold) - 8 ports (PN 50024) 1/2” - 3 ports (PN 50033) 1/2” - 4 ports (PN 50043) 1/2” - 6 ports (PN 50063) 1/2” - 8 ports (PN 50083) 1/2” (2 hot, 3 cold) - 5 ports (PN 51063) 1/2” (3 hot, 4 cold) - 7 ports (PN 51073) 1/2” (4 hot, 6 cold) - 10 ports (PN 51003) PEX Compression ManaBloc 3/8” (6 hot, 8 cold) - 14 ports (PN 36142) 3/8” (8 hot, 10 cold) - 18 ports (PN 36182) 3/8” (9 hot, 15 cold) - 24 ports (PN 36242) 3/8” (12 hot, 18 cold) - 30 ports (PN 36302) 3/8” (14 hot, 22 cold) - 36 ports (PN 36362) 1/2” (6 hot, 8 cold) - 14 ports (PN 36144) 1/2” (8 hot, 10 cold) - 18 ports (PN 36183) 1/2” (9 hot, 15 cold) - 24 ports (PN 36243) 1/2” (12 hot, 18 cold) - 30 ports (PN 36303) 1/2” (14 hot, 22 cold) - 36 ports (PN 36363) 3/8” (7 hot, 11 cold) & 1/2” (2 hot, 4 cold) - 24 ports (PN 36624) 3/8” (10 hot, 12 cold) & 1/2” (2 hot, 6 cold) - 30 ports (PN 36630) 3/8” (11 hot, 15 cold) & 1/2” (3 hot, 7 cold) - 36 ports (PN 36636) PEX Compression MiniBloc 3/8” - 3 ports (PN 36032) 3/8” - 4 ports (PN 36042) 3/8” - 6 ports (PN 36062) 3/8” - 8 ports (PN 36082) 1/2” - 3 ports (PN 36033) 1/2” - 4 ports (PN 36043) 1/2” - 6 ports (PN 36063) 1/2” - 8 ports (PN 36083)[5] Certified for a maximum of 36 ports. Manifold ports (barb) are 3/8” or 1/2” and manifold inlets/outlets (supply ports) are 1”. Certification includes lead-free brass adapters with a maximum of (22) barb adapters (3/8” x 1/2” or 1/2” x 1/2”) with (1) inlet supply adapter and (1) outlet supply adapter (3/4” x 1” or 1” x 1”) for cold applications. Certification includes lead-free brass adapters with a maximum of (14) barb adapters (3/8” x 1/2” or 1/2” x 1/2”) and (1) inlet supply adapter (3/4” x 1” or 1”x 1”) for hot applications. Certification includes bronze adapters with a maximum of (22) barb adapters (3/8” x 1/2” or 1/2” x 1/2”) with (1) inlet supply adapter and (1) outlet supply adapter (3/4” x 1” or 1” x 1”) for cold applications. Certification includes bronze adapters with a maximum of (14) barb adapters (3/8” x 1/2” or 1/2” x 1/2”) and (1) inlet supply adapter (3/4” x 1” or 1”x 1”) for hot applications. Certification includes polysulphone adapters with a maximum of (22) barb adapters (3/8” x 1/2” or 1/2” x 1/2”) and (2) supply adapters (3/4” x 1” or 1”x 1”) for cold applications. Certification includes polysulphone adapters with a maximum of (14) barb adapters (3/8” x 1/2” or 1/2” x 1/2”) and (1) supply adapter (3/4” x 1” or 1”x 1”) for hot applications.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : # 2 USA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe[G] | ||||
Viega PureFlow Icemaker Tubing | 1/8" | CLD 23 | PE | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Manchester, TN
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe[G] | ||||
Viega ProPress 316 Eco Tubing | 1/2" - 3" | C. HOT | SS | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Viking Plastics | |
202 Industrial Drive | |
Huntsville, AL 35811 | |
United States | |
256-858-3711 |
Facility : Huntsville, AL
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe[G] | ||||
Viking Plastics | 3/4" - 3" | C. HOT | CPVC | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Viking Plastics LLC | |
202 Industrial Drive | |
Huntsville, AL 35811 | |
United States | |
256-858-3711 |
Facility : Huntsville, AL
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe[G] | ||||
KT Plastics Blazemaster | 3/4" - 3" | C. HOT | CPVC | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Vinyltech Corporation | |
201 South 61st Avenue | |
Phoenix, AZ 85043 | |
United States | |
602-233-0071 |
Facility : Phoenix, AZ
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe Only[G] | ||||
PW Pipe PVC | >= 1/2" | CLD 23 | PVC | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Vogel Paint, Inc. | |
1110 Albany Place Southeast | |
Orange City, IA 51041 | |
United States | |
800-728-6435 | |
712-737-4993 | |
Visit this company's website |
Facility : Orange City, IA
Protective (Barrier) Materials
Water | Water | |||
Water Contact | Contact | Contact | ||
Trade Designation | Size Restriction | Temp | Material | |
Coatings - Pipe[G] | ||||
EE07-44673 Gray Epoxy[1] | >= 2.5" | CLD 23 | PEC | |
EE17-45379 Aqua White Epoxy[1] | >= 2.5" | CLD 23 | PEC | |
[1] Colors: Gray, White Number of coats: 1-2 Maximum field use dry film thickness (in mils): 20 mils Recoat cure time and temperature: 15 minutes at 350°F Final cure time and temperature: 15 minutes at 350°F[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Coatings - Tank[G] | ||||
EE07-44673 Gray Epoxy[1] | >= 4000 gal | CLD 23 | PEC | |
EE17-45379 Aqua White Epoxy[1] | >= 4000 gal | CLD 23 | PEC | |
[1] Colors: Gray, White Number of coats: 1-2 Maximum field use dry film thickness (in mils): 20 mils Recoat cure time and temperature: 15 minutes at 350°F Final cure time and temperature: 15 minutes at 350°F[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Vulcan Plastics Corporation | |
207 Durham Drive | |
Athens, AL 35611 | |
United States | |
256-233-3520 |
Facility : Athens, AL
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe | ||||
Vulcan | 2" - 18" | CLD 30 | PVC |
Ward Manufacturing, LLC | |
115 Gulick Street | |
P.O. Box 9 | |
Blossburg, PA 16912-0009 | |
United States | |
570-638-2131 |
Facility : Blossburg, PA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[G] | ||||
45° ELL Class 125[2] | 1/2" - 4" | C. HOT | CI | |
45° ELL Class 150[2] | 1/8" - 4" | C. HOT | MI | |
45° ELL Class 300[2] | 1/4" - 2" | C. HOT | MI | |
45° Straight ELL Class 250[2] | 1/2" - 2 1/2" | C. HOT | CI | |
45° Street ELL Class 300[2] | 1 1/4" | C. HOT | MI | |
45° Y Class 150[2] | 1 1/4" | C. HOT | MI | |
90° Reducing ELL Class 125[2] | 3/4"x1/2"-4"x3 1/2" | C. HOT | CI | |
90° Straight ELL Class 125[2] | 1/8" - 4" | C. HOT | CI | |
90° Straight ELL Class 150[2] | 1/8" - 4" | C. HOT | MI | |
90° Straight ELL Class 250[2] | 1/2" - 2 1/2" | C. HOT | CI | |
90° Straight ELL Class 300[2] | 1/4" - 3" | C. HOT | MI | |
90° Street ELL Class 150[2] | 1/8" - 3" | C. HOT | MI | |
90° Street ELL Class 300[2] | 1/4" - 2" | C. HOT | MI | |
Cast Iron 90° Straight ELL Class 125[2] | 1/4" - 4" | C. HOT | CI | |
Concentric Reducing Coupling Class 125[2] | 3/4"x1/2"-3"x1 1/2" | C. HOT | CI | |
Cored Plugs Class 125[2] | 1/2" - 4" | C. HOT | CI | |
Countersunk Plugs Class 125 and 150[2] | 1/4" - 3 1/2" | C. HOT | CI | |
Coupling, Class 150 Right & Left Thread Coupling[2] | 1/2" - 2" | C. HOT | MI | |
Coupling, Class 150 Straight Coupling[2] | 1/8" - 4" | C. HOT | MI | |
Cross Class 150[2] | 1/4" - 2" | C. HOT | MI | |
Cross Class 300[2] | 1/2" - 2" | C. HOT | MI | |
Double Tap Tank Bushings (Heavy Type Only)[2] | 1"x¾"x¾"-4"x3"x3" | C. HOT | CI | |
Eccentric Reducing Coupling Class 125[2] | 3/4"x1/2" - 2"x1" | C. HOT | CI | |
Extension Pieces Class 150[2] | 3/8" - 1 1/4" | C. HOT | MI | |
Flush Bushings Class 125[2] | 1 1/4"x3/4"-4"x3" | C. HOT | CI | |
Flush Bushings Class 150[2] | 1/4"x1/8"-4"x3 1/2" | C. HOT | MI | |
Hex Head Cleanout Plugs Class 125[2] | 1 1/4" - 4" | C. HOT | CI | |
Hexagon Bushings Class 125[2] | 1 ¼" x ¾" - 4" x 3" | C. HOT | CI | |
Hexagon Bushings Class 150[2] | 1/4"x1/8"-4"x3 1/2" | C. HOT | MI | |
Hexagon Coupling[2] | 1" | C. HOT | CI | |
Locknuts Class 150[2] | 1/8" - 2" | C. HOT | MI | |
Pipe Cap Class 125[2] | 2 1/2" - 4" | C. HOT | CI | |
Pipe Caps Class 150[2] | 1/8" - 4" | C. HOT | MI | |
Pipe Caps Class 300[2] | 1/4" - 2" | C. HOT | MI | |
Reducing 90° ELL Class 150[2] | 1/4"x1/8" - 4"x3" | C. HOT | MI | |
Reducing 90° ELL Class 300[2] | ½"x3/8" - 1"x3/4" | C. HOT | MI | |
Reducing Coupling Class 150[2] | 1/4"x1/8" - 4"x3" | C. HOT | MI | |
Reducing Coupling Class 300[2] | 3/8" x ¼" - 2" x 1" | C. HOT | MI | |
Reducing Cross Class 125[2] | 1 1/4"x1" - 2"x1" | C. HOT | CI | |
Reducing Street Tees Class 150[2] | 1 1/4" x 1" x 1 1/4" | C. HOT | MI | |
Reducing Tee Class 125[2] | 1/2"x3/8"-4"x3 1/2" | C. HOT | CI | |
Reducing Tee Class 250[2] | 1 ¼"x3/4"-2"x1 1/2" | C. HOT | CI | |
Reducing Tees Class 150[2] | ½"x½"x3/8"-4"x4"x2" | C. HOT | MI | |
Reducing Tees Class 300[2] | ¾"x¾"x½"-3"x3"x2" | C. HOT | MI | |
Return Bend Open Class 150[2] | 1/2" - 1" | C. HOT | MI | |
Solid Plugs Class 125[2] | 1/8" - 4" | C. HOT | CI | |
Steel Hex Socket Plugs[2] | 1/8" - 3/4" | C. HOT | CI | |
Straight Coupling Class 300[2] | 1/4" - 2" | C. HOT | MI | |
Straight Cross Class 125[2] | 1/2" - 1 1/2" | C. HOT | CI | |
Straight Tee Class 125[2] | 3/8" - 4" | C. HOT | CI | |
Straight Tee Class 250[2] | 3/8" - 2 1/2" | C. HOT | CI | |
Straight Tee Class 300[2] | 1/4" - 3" | C. HOT | MI | |
Straight Tees Class 150[2] | 1/8" - 4" | C. HOT | MI | |
Street 45° ELL Class 150[2] | 1/8" - 2" | C. HOT | MI | |
Street Tees Class 150[2] | 3/4" - 2" | C. HOT | MI | |
Ward Cast Iron Fittings - Galvanized[1] | 3/4" - 4" | C. HOT | GALV | |
Ward Malleable Iron Fittings - Galvanized[1] | 3/4" - 4" | C. HOT | GALV | |
Ward Union Iron to Iron Seat Class 150[2] | 1/8" - 3" | C. HOT | MI | |
Ward Union Iron to Iron Seat Class 300[2] | 1/8" - 3" | C. HOT | MI | |
Waste Nuts Class 150[2] | 1/2" - 1" | C. HOT | MI | |
Y BLK 300# STREET 45 ELBOW[2] | 1 1/4" | C. HOT | MI | |
Y BLK CI 250# 45 ELL[2] | 1/2" - 2-1/2" | C. HOT | CI | |
Y BLK CI 250# 90 ELL[2] | 1/2" - 2-1/2" | C. HOT | CI | |
Y BLK CI 250# TEE[2] | 3/8" - 2-1/2" | C. HOT | CI | |
Y BLK CI 45 ELL[2] | 1/82" - 4" | C. HOT | CI | |
Y BLK CI 90 ELL[2] | 1/8" - 4" | C. HOT | CI | |
Y BLK CI C/O PLUG[2] | 1 1/4" - 4" | C. HOT | CI | |
Y BLK CI C/S PLUG[2] | 1/4" - 3 1/2" | C. HOT | CI | |
Y BLK CI CAP[2] | 2 1/2" - 4" | C. HOT | CI | |
Y BLK CI CROSS[2] | 1/2" - 1 1/2" | C. HOT | CI | |
Y BLK CI HEX COUPLING[2] | 1" | C. HOT | CI | |
Y BLK CI SOLID PLUG[2] | 1/8" 4" | C. HOT | CI | |
Y BLK CI SQ HD PLUG[2] | 1/2" - 4" | C. HOT | CI | |
Y BLK CI TEE[2] | 3/8" -4" | C. HOT | CI | |
Y BLK MI 150# AI UNION[2] | 1/8" - 3" | C. HOT | MI | |
Y BLK MI 300# AI UNION[2] | 1/8 - 3 | C. HOT | MI | |
Y BLK MI 45 ELL[2] | 1/8" - 4" | C. HOT | MI | |
Y BLK MI 45 ELL 300#[2] | 1/4" - 2" | C. HOT | MI | |
Y BLK MI 45 WYE[2] | 1 1/4" | C. HOT | MI | |
Y BLK MI 90 ELL[2] | 1/8" - 4" | C. HOT | MI | |
Y BLK MI 90 ELL 300#[2] | 1/4" - 3" | C. HOT | MI | |
Y BLK MI CAP[2] | 1/8" - 4" | C. HOT | MI | |
Y BLK MI CAP 300#[2] | 1/4" - 2" | C. HOT | MI | |
Y BLK MI CPLG[2] | 1/8" - 4" | C. HOT | MI | |
Y BLK MI CPLG 300#[2] | 1/4" - 2" | C. HOT | MI | |
Y BLK MI CPLG L&R THD[2] | 1/2" - 2" | C. HOT | MI | |
Y BLK MI CROSS[2] | 1/4" - 2" | C. HOT | MI | |
Y BLK MI CROSS 300#[2] | 1/2" - 2" | C. HOT | MI | |
Y BLK MI EXT PCS[2] | 3/8" - 1" | C. HOT | MI | |
Y BLK MI LOCK NUT[2] | 1/8" - 2" | C. HOT | MI | |
Y BLK MI RTN BEND[2] | 1/2" - 1" | C. HOT | MI | |
Y BLK MI ST 45 ELL[2] | 1/8" - 2" | C. HOT | MI | |
Y BLK MI ST 90 ELL[2] | 1/8 - 3" | C. HOT | MI | |
Y BLK MI ST 90 ELL 300#[2] | 1/4" - 2" | C. HOT | MI | |
Y BLK MI STREET TEE[2] | 3/4" - 2" | C. HOT | MI | |
Y BLK MI TEE[2] | 1/8" - 4" | C. HOT | MI | |
Y BLK MI TEE 300#[2] | 1/4 - 3" | C. HOT | MI | |
Y BLK MI WASTE NUT[2] | 1/2" - 1" | C. HOT | MI | |
Y BLK STEEL HEX SOCKET PLUG[2] | 1/8" - 3/4" | C. HOT | CI | |
Y GALV CI 45 ELL[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI 90 ELL[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI BLIND FLG[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI C/O PLUG[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI CAP[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI COMP FLANG[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI CROSS[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI DRG 11-1/4 ELL[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI DRG 22-1/2 ELL[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI DRG 45 ELLS[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI DRG 60 ELL[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI DRG 90 ELLS[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI DRG 90 TY[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI DRG DBLE Y[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI DRG LT 45 ELLS[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI DRG LT 90 ELLS[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI DRG LTTY 90[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI DRG P-TRAP[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI DRG P-TRAP W/O C-OUT[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI DRG ST 45 ELL[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI DRG ST 90 ELL[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI DRG TEE[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI FLG 45 ELL[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI FLG 90 ELL[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI FLG CROSS[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI FLG TEE[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI FLG UNION[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI FLOOR FLG[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI SOLID PLUG[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI SQ HD PLUG[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV CI TEE[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI 45 ELL[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI 45 ELL 300#[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI 90 ELL[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI 90 ELL 300#[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI C/S PLUG[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI CAP[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI CAP 300#[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI CPLG[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI CPLG 300#[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI CPLG L&R THD[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI CROSS[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI CROSS 300#[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI EXT PCS[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI FLOOR FLG[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI LOCK NUT[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI RTN BEND[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI ST 45 ELL[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI ST 90 ELL[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI ST 90 ELL 300#[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI STREET TEE[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI TEE[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI TEE 300#[1] | 3/4" - 4" | C. HOT | GALV | |
Y GALV MI WASTE NUT[1] | 3/4" - 4" | C. HOT | GALV | |
Y GLV 300# STREET 45 ELBOW[1] | 3/4" - 4" | C. HOT | GALV | |
Y GLV MI 150# 45 WYE[1] | 3/4" - 4" | C. HOT | GALV | |
Y x Y BLK CI 125# ECC RED[2] | 3/4" x 1/2"-2" x 1" | C. HOT | CI | |
Y x Y BLK CI 250# TEE[2] | 1 1/4"x3/4"-2x1 1/2" | C. HOT | CI | |
Y x Y BLK CI 90 ELL[2] | 3/4"x1/2"-4"x3 1/2" | C. HOT | CI | |
Y x Y BLK CI CROSS[2] | 1 1/4" x 1"-2" x 1" | C. HOT | CI | |
Y x Y BLK CI DBLTAP BUSH[2] | 1"x3/4"x3/4"-4"x3" | C. HOT | CI | |
Y x Y BLK CI FLUSH BUSH[2] | 1 1/4" x 3/4"-4" x3" | C. HOT | CI | |
Y x Y BLK CI HEX BUSH[2] | 1 1/4"x3/4" - 4"x3" | C. HOT | CI | |
Y x Y BLK CI REDUCER[2] | 3/4"x1/2"-3"x1 1/2" | C. HOT | CI | |
Y x Y BLK CI TEE[2] | 1/2"x3/8"-4"x3 1/2" | C. HOT | CI | |
Y x Y BLK MI 90 ELL[2] | 1/4" x 1/8" - 4" x3" | C. HOT | MI | |
Y x Y BLK MI 90 ELL 300#[2] | 1/2"x3/8" - 1"x3/4" | C. HOT | MI | |
Y x Y BLK MI CPLG[2] | 1/4" x1/8" - 4"x3" | C. HOT | MI | |
Y x Y BLK MI CPLG 300#[2] | 3/8"x1/4" - 2"x1" | C. HOT | MI | |
Y x Y BLK MI FLUSH BUSH[2] | 1/4"x1/8"-4"x3 1/2" | C. HOT | MI | |
Y x Y BLK MI HEX BUSH[2] | 1/4"x1/8"- 4"x3 1/2" | C. HOT | MI | |
Y x Y BLK MI TEE[2] | ½"x½"x3/8"-4"x4"x2" | C. HOT | MI | |
Y x Y BLK MI TEE 300#[2] | 3/4x3/4x½"-3"x3"x2" | C. HOT | MI | |
Y x Y GALV CI 125# ECC RED[1] | 3/4" - 4" | C. HOT | GALV | |
Y x Y GALV CI 90 ELL[1] | 3/4" - 4" | C. HOT | GALV | |
Y x Y GALV CI CROSS[1] | 3/4" - 4" | C. HOT | GALV | |
Y x Y GALV CI DBLTAP BUSH[1] | 3/4" - 4" | C. HOT | GALV | |
Y x Y GALV CI FLG TEE[1] | 3/4" - 4" | C. HOT | GALV | |
Y x Y GALV CI FLUSH BUSH | 3/4" - 4" | C. HOT | GALV | |
Y x Y GALV CI HEX BUSH | 3/4" - 4" | C. HOT | GALV | |
Y x Y GALV CI REDC. FLG[1] | 3/4" - 4" | C. HOT | GALV | |
Y x Y GALV CI REDUCER[1] | 3/4" - 4" | C. HOT | GALV | |
Y x Y GALV CI TEE[1] | 3/4" - 4" | C. HOT | GALV | |
Y x Y GALV MI 90 ELL | 3/4" - 4" | C. HOT | GALV | |
Y x Y GALV MI 90 ELL 300#[1] | 3/4" - 4" | C. HOT | GALV | |
Y x Y GALV MI CPLG[1] | 3/4" - 4" | C. HOT | GALV | |
Y x Y GALV MI CPLG 300#[1] | 3/4" - 4" | C. HOT | GALV | |
Y x Y GALV MI FLUSH BUSH[1] | 3/4" - 4" | C. HOT | GALV | |
Y x Y GALV MI HEX BUSH[1] | 3/4" - 4" | C. HOT | GALV | |
Y x Y GALV MI STREET TEE[1] | 3/4" - 4" | C. HOT | GALV | |
Y x Y GALV MI TEE[1] | 3/4" - 4" | C. HOT | GALV | |
Y x Y GALV MI TEE 300#[1] | 3/4" - 4" | C. HOT | GALV | |
Y x Y x Y BLK MI 150#ST T[2] | 1 1/4" x 1" x 1 1/4" | C. HOT | MI | |
[1] C-OUT - CLEANOUT DRG - DRAINAGE 22 1/2 - 22 1/2 DEGREE 11 1/4 - 11 1/4 DEGREE TY - Y TEE LTTY - LONG TURN Y TEE W/O - WITHOUT FLG - FLANGE Y - Size in inches[2] The abbreviations in the trade names refer to: 125 – CLASS 125 FITTING 150 – CLASS 150 FITTING 250 – CLASS 250 FITTING 300 – CLASS 300 FITTING 45 – 45 DEGREE 90 – 90 DEGREE BLK - BLACK (Nongalvanized parts) BUSH – BUSHING C/O – CLEANOUT C/S – COUNTERSUNK CI – CAST IRON C-O – CLEANOUT C-OT - CLEANOUT CPLG – COUPLING DBLTAP – DOUBLETAP TANK BUSHING (HEAVY TYPE ONLY) ECC – ECCENTRIC ELL – ELBOW EXT PCS – EXTENSION PIECE GALV - GALVANIZED GLV - GALVANIZED HEX – HEXAGON L&R THD – LEFT & RIGHT HAND THREAD MI – MALLEABLE IRON RED – REDUCING RTN – RETURN SQ HD – SQUARE HEAD, (CORED PLUG) ST – STREET STL – STEEL Y – Size in inches[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Warren Environmental and Coatings, LLC | |
137 Pine Street | |
Middleborough, MA 02346 | |
United States | |
508-947-8539 | |
Visit this company's website |
Facility : Middleborough, MA
Protective (Barrier) Materials
Water | Water | |||
Water Contact | Contact | Contact | ||
Trade Designation | Size Restriction | Temp | Material | |
Coatings - Pipe - Immediate Return to Service | ||||
301-01-0[1][2] | >= 36" | CLD 23 | EPOXY | |
301-01-1[1][2] | >= 36" | CLD 23 | EPOXY | |
301-01-2[1][2] | >= 36" | CLD 23 | EPOXY | |
SAFE-T Plus[2][3] | >= 6" | CLD 23 | EPOXY | |
[1] Number of Coats: 1 Sequence of Coats: N/A Maximum Field Use Dry Film Thickness (in mils): 115 Maximum Thinner: N/A Final Cure Time and Temperature: 5 days at 70°F Special Comments:This is a single coat system. Multiple coats permissible only when directed and recommended by the manufacturer. Spray application shall be mixed and sprayed utilizing Warren Environmental's patented equipment. Batches made from applications by hand require 5 minutes pre-mixing components by electric drill with mixing paddle. Components shall be combined in a ratio of 2 parts base (Part A) to 1 part activator (Part B) and thoroughly blended. A one hour flush at 3 gallons per minute is required before returning to service.[2] Pipe coating evaluated for Immediate Return to Service.[3] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 3 days at 77°F Special Comments: Mix ratio of Part A (Base) to Part B (Activator) is 2:1 by volume. Base should be heated to 125ºF and activator should be heated to 100ºF. Mix each component with a paddle drill for 3-4 minutes. Component should be visually uniform with no settling or streaking. After combining Part A and B, blend the mixture in the same manner for a few minutes. Mixture should be uniform with no settling or streaking. Following application a 1 hour flush with cold tap water at 1 gallon/min is required. | ||||
Coatings - Tank | ||||
301-01-0[1][2] | >= 1000 gal. | CLD 23 | EPOXY | |
301-01-1[1][2] | >= 1000 gal. | CLD 23 | EPOXY | |
301-01-2[1][2] | >= 1000 gal. | CLD 23 | EPOXY | |
SAFE-T Plus[2][3] | >= 450 gal. | CLD 23 | EPOXY | |
[1] Number of Coats: 1 Sequence of Coats: N/A Maximum Field Use Dry Film Thickness (in mils): 115 Maximum Thinner: N/A Final Cure Time and Temperature: 5 days at 70°F Special Comments:This is a single coat system. Multiple coats permissible only when directed and recommended by the manufacturer. Spray application shall be mixed and sprayed utilizing Warren Environmental's patented equipment. Batches made from applications by hand require 5 minutes pre-mixing components by electric drill with mixing paddle. Components shall be combined in a ratio of 2 parts base (Part A) to 1 part activator (Part B) and thoroughly blended. A one hour flush at 3 gallons per minute is required before returning to service.[2] Pipe coating evaluated for Immediate Return to Service.[3] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 3 days at 77°F Special Comments: Mix ratio of Part A (Base) to Part B (Activator) is 2:1 by volume. Base should be heated to 125ºF and activator should be heated to 100ºF. Mix each component with a paddle drill for 3-4 minutes. Component should be visually uniform with no settling or streaking. After combining Part A and B, blend the mixture in the same manner for a few minutes. Mixture should be uniform with no settling or streaking. Following application a 1 hour flush with cold tap water at 1 gallon/min is required. |
Washington Penn Plastic Co., Inc. | |
480 Johnson Road | |
Washington, PA 15301 | |
United States | |
800-864-4210 | |
724-228-1260 | |
Visit this company's website |
Facility : LaFayette, GA
Potable Water Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | End Use | Temp | Material | |
Potable Water Materials | ||||
NPPH2GF1 Black | A,F,P | CLD 23 | RPP | |
NPPH2GF1 Gray | A,F,P | CLD 23 | RPP | |
NPPH2GF1 Natural | A,F,P | CLD 23 | RPP | |
NPPH2GF1 White | A,F,P | CLD 23 | RPP | |
NPPH2GF2 Black | A,F,P | CLD 23 | RPP | |
NPPH2GF2 Gray | A,F,P | CLD 23 | RPP | |
NPPH2GF2 Natural | A,F,P | CLD 23 | RPP | |
NPPH2GF2 White | A,F,P | CLD 23 | RPP | |
NPPH2GF3 Black | A,F,P | CLD 23 | RPP | |
NPPH2GF3 Gray | A,F,P | CLD 23 | RPP | |
NPPH2GF3 Natural | A,F,P | CLD 23 | RPP | |
NPPH2GF3 UV Black[1] | A,F,P | CLD 23 | PP | |
NPPH2GF3 UV Green[1] | A,F,P | CLD 23 | PP | |
NPPH2GF3 UV Green[1] | A,F,P | CLD 23 | PP | |
NPPH2GF3 UV Natural[1] | A,F,P | CLD 23 | PP | |
NPPH2GF3 UV Taupe[1] | A,F,P | CLD 23 | PP | |
NPPH2GF3 White | A,F,P | CLD 23 | RPP | |
NPPH2GF4 Black | A,F,P | CLD 23 | RPP | |
NPPH2GF4 Gray | A,F,P | CLD 23 | RPP | |
NPPH2GF4 Natural | A,F,P | CLD 23 | RPP | |
NPPH2GF4 White | A,F,P | CLD 23 | RPP | |
NPPH2UF0-Black | A,F,P | CLD 23 | RPP | |
NPPH2UF0-Gray | A,F,P | CLD 23 | RPP | |
NPPH2UF0-Natural | A,F,P | CLD 23 | RPP | |
NPPH2UF0-White | A,F,P | CLD 23 | RPP | |
[1] 852LU6 Taupe, 452LU5 Green, 752LU3 Black, and 752LU4 Gray color concentrates may be mixed with NPPH2GF3 UV Natural at a maximum of 2%. |
Facility : Frankfort, KY
Potable Water Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | End Use | Temp | Material | |
Potable Water Materials | ||||
NPPH2GF1 Black | A,F,P | C. HOT | RPP | |
NPPH2GF1 Gray | A,F,P | C. HOT | RPP | |
NPPH2GF1 Natural | A,F,P | C. HOT | RPP | |
NPPH2GF1 White | A,F,P | C. HOT | RPP | |
NPPH2GF2 Black | A,F,P | C. HOT | RPP | |
NPPH2GF2 Gray | A,F,P | C. HOT | RPP | |
NPPH2GF2 Natural | A,F,P | C. HOT | RPP | |
NPPH2GF2 White | A,F,P | C. HOT | RPP | |
NPPH2GF3 Black | A,F,P | C. HOT | RPP | |
NPPH2GF3 Gray | A,F,P | C. HOT | RPP | |
NPPH2GF3 Natural | A,F,P | C. HOT | RPP | |
NPPH2GF3 UV Black[1] | A,F,P | CLD 23 | PP | |
NPPH2GF3 UV Gray[1] | A,F,P | CLD 23 | PP | |
NPPH2GF3 UV Green[1] | A,F,P | CLD 23 | PP | |
NPPH2GF3 UV Natural[1] | A,F,P | CLD 23 | PP | |
NPPH2GF3 UV Taupe[1] | A,F,P | CLD 23 | PP | |
NPPH2GF3 White | A,F,P | C. HOT | RPP | |
NPPH2GF4 Black | A,F,P | C. HOT | RPP | |
NPPH2GF4 Gray | A,F,P | C. HOT | RPP | |
NPPH2GF4 Natural | A,F,P | C. HOT | RPP | |
NPPH2GF4 White | A,F,P | C. HOT | RPP | |
NPPH2UF0-Black | A,F,P | C. HOT | RPP | |
NPPH2UF0-Gray | A,F,P | C. HOT | RPP | |
NPPH2UF0-Natural | A,F,P | C. HOT | RPP | |
NPPH2UF0-White | A,F,P | C. HOT | RPP | |
[1] 852LU6 Taupe, 452LU5 Green, 752LU3 Black, and 752LU4 Gray color concentrates may be mixed with NPPH2GF3 UV Natural at a maximum of 2%. |
Facility : Wapakoneta, OH
Potable Water Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | End Use | Temp | Material | |
Potable Water Materials | ||||
NPPH2GF1 Black | A,F,P | C. HOT | RPP | |
NPPH2GF1 Gray | A,F,P | C. HOT | RPP | |
NPPH2GF1 Natural | A,F,P | C. HOT | RPP | |
NPPH2GF1 White | A,F,P | C. HOT | RPP | |
NPPH2GF2 Black | A,F,P | C. HOT | RPP | |
NPPH2GF2 Gray | A,F,P | C. HOT | RPP | |
NPPH2GF2 Natural | A,F,P | C. HOT | RPP | |
NPPH2GF2 White | A,F,P | C. HOT | RPP | |
NPPH2GF3 Black | A,F,P | C. HOT | RPP | |
NPPH2GF3 Gray | A,F,P | C. HOT | RPP | |
NPPH2GF3 Natural | A,F,P | C. HOT | RPP | |
NPPH2GF3 UV Black[1] | A,F,P | CLD 23 | PP | |
NPPH2GF3 UV Gray[1] | A,F,P | CLD 23 | PP | |
NPPH2GF3 UV Green[1] | A,F,P | CLD 23 | PP | |
NPPH2GF3 UV Natural[1] | A,F,P | CLD 23 | PP | |
NPPH2GF3 White | A,F,P | C. HOT | RPP | |
NPPH2GF4 Black | A,F,P | C. HOT | RPP | |
NPPH2GF4 Gray | A,F,P | C. HOT | RPP | |
NPPH2GF4 Natural | A,F,P | C. HOT | RPP | |
NPPH2GF4 White | A,F,P | C. HOT | RPP | |
NPPH2UF0-Black | A,F,P | C. HOT | RPP | |
NPPH2UF0-Gray | A,F,P | C. HOT | RPP | |
NPPH2UF0-Natural | A,F,P | C. HOT | RPP | |
NPPH2UF0-White | A,F,P | C. HOT | RPP | |
[1] 852LU6 Taupe, 452LU5 Green, 752LU3 Black, and 752LU4 Gray color concentrates may be mixed with NPPH2GF3 UV Natural at a maximum of 2%. |
Facility : Eighty Four, PA
Potable Water Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | End Use | Temp | Material | |
Potable Water Materials | ||||
NPPH2TF1-Black | A,F,P | C. HOT | RPP | |
NPPH2TF1-Gray | A,F,P | C. HOT | RPP | |
NPPH2TF1-Natural | A,F,P | C. HOT | RPP | |
NPPH2TF1-White | A,F,P | C. HOT | RPP | |
NPPH2TF2-Black | A,F,P | C. HOT | RPP | |
NPPH2TF2-Gray | A,F,P | C. HOT | RPP | |
NPPH2TF2-Natural | A,F,P | C. HOT | RPP | |
NPPH2TF2-White | A,F,P | C. HOT | RPP | |
NPPH2TF3-Black | A,F,P | C. HOT | RPP | |
NPPH2TF3-Gray | A,F,P | C. HOT | RPP | |
NPPH2TF3-Natural | A,F,P | C. HOT | RPP | |
NPPH2TF3-White | A,F,P | C. HOT | RPP | |
NPPH2TF4-Black | A,F,P | C. HOT | RPP | |
NPPH2TF4-Gray | A,F,P | C. HOT | RPP | |
NPPH2TF4-Natural | A,F,P | C. HOT | RPP | |
NPPH2TF4-White | A,F,P | C. HOT | RPP |
Facility : Washington, PA
Potable Water Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | End Use | Temp | Material | |
Potable Water Materials | ||||
NPPH2GF1 Black | A,F,P | C. HOT | RPP | |
NPPH2GF1 Gray | A,F,P | C. HOT | RPP | |
NPPH2GF1 Natural | A,F,P | C. HOT | RPP | |
NPPH2GF1 White | A,F,P | C. HOT | RPP | |
NPPH2GF2 Black | A,F,P | C. HOT | RPP | |
NPPH2GF2 Gray | A,F,P | C. HOT | RPP | |
NPPH2GF2 Natural | A,F,P | C. HOT | RPP | |
NPPH2GF2 White | A,F,P | C. HOT | RPP | |
NPPH2GF3 Black | A,F,P | C. HOT | RPP | |
NPPH2GF3 Gray | A,F,P | C. HOT | RPP | |
NPPH2GF3 Natural | A,F,P | C. HOT | RPP | |
NPPH2GF3 UV Black[1] | A,F,P | CLD 23 | PP | |
NPPH2GF3 UV Gray[1] | A,F,P | CLD 23 | PP | |
NPPH2GF3 UV Green[1] | A,F,P | CLD 23 | PP | |
NPPH2GF3 UV Natural[1] | A,F,P | CLD 23 | PP | |
NPPH2GF3 UV Taupe[1] | A,F,P | CLD 23 | PP | |
NPPH2GF3 White | A,F,P | C. HOT | RPP | |
NPPH2GF4 Black | A,F,P | C. HOT | RPP | |
NPPH2GF4 Gray | A,F,P | C. HOT | RPP | |
NPPH2GF4 Natural | A,F,P | C. HOT | RPP | |
NPPH2GF4 White | A,F,P | C. HOT | RPP | |
NPPH2TF1-Black | A,F,P | C. HOT | RPP | |
NPPH2TF1-Gray | A,F,P | C. HOT | RPP | |
NPPH2TF1-Natural | A,F,P | C. HOT | RPP | |
NPPH2TF1-White | A,F,P | C. HOT | RPP | |
NPPH2TF2-Black | A,F,P | C. HOT | RPP | |
NPPH2TF2-Gray | A,F,P | C. HOT | RPP | |
NPPH2TF2-Natural | A,F,P | C. HOT | RPP | |
NPPH2TF2-White | A,F,P | C. HOT | RPP | |
NPPH2TF3-Black | A,F,P | C. HOT | RPP | |
NPPH2TF3-Gray | A,F,P | C. HOT | RPP | |
NPPH2TF3-Natural | A,F,P | C. HOT | RPP | |
NPPH2TF3-White | A,F,P | C. HOT | RPP | |
NPPH2TF4-Black | A,F,P | C. HOT | RPP | |
NPPH2TF4-Gray | A,F,P | C. HOT | RPP | |
NPPH2TF4-Natural | A,F,P | C. HOT | RPP | |
NPPH2TF4-White | A,F,P | C. HOT | RPP | |
NPPH2UF0-Black | A,F,P | C. HOT | RPP | |
NPPH2UF0-Gray | A,F,P | C. HOT | RPP | |
NPPH2UF0-Natural | A,F,P | C. HOT | RPP | |
NPPH2UF0-White | A,F,P | C. HOT | RPP | |
[1] 852LU6 Taupe, 452LU5 Green, 752LU3 Black, and 752LU4 Gray color concentrates may be mixed with NPPH2GF3 UV Natural at a maximum of 2%. |
Water Surplus | |
726 Beacon Street | |
Loves Park, IL 61111 | |
United States | |
815-636-8833 | |
Visit this company's website |
Facility : # 1 USA
Process Media
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Oxidative Media | ||||
OxiPlus75 | [1] | CLD 23 | MNDOX | |
[1] Certified for the following US mesh sizes: 8 x 20, 20 x 40. Certified for the following UK mesh size: 18/44. |
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
Water Surplus | |
726 Beacon Street | |
Loves Park, IL 61111 | |
United States | |
800-919-0888 | |
Visit this company's website |
Facility : # 1 Houston, TX
Process Media
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Oxidative Media | ||||
OxiPlus12 | 18 x 45 mesh | CLD 23 | OTHER |
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
Waterline Products Co. Ltd. | |
238 Britannia Road East | |
Mississauga, ON L4Z 1S6 | |
Canada | |
905-625-9440 |
Facility : Middlefield, OH
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe | ||||
Waterline[G] | >= 1/8" | C. HOT | PEX | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Waterman Valve LLC | |
25500 Road 204 | |
Exeter, CA 93221 | |
United States | |
559-562-4000 | |
Visit this company's website |
Facility : Exeter, CA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Miscellaneous Process Devices/Components[G] | ||||
MODEL VBG RECTANGULAR BUTTERFLY VALVE | 24" - 96" | CLD 23 | MLTPL | |
SS-250 | 6" - 120" | CLD 23 | MLTPL | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Wateropolis Corp | |
12375 Kinsman Road | |
Bldg K | |
Newbury, OH 44065 | |
United States | |
440-596-0325 | |
Visit this company's website |
Facility : # 1 USA
Process Media
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Filtration Media[G] | ||||
Ceraflow | [1] | CLD 23 | CERAM | |
Ceraflow | [2] | CLD 23 | CERAM | |
[1] Certified for the following mesh sizes: 16x20; 20x40; 30x50; 40x70.[2] Certified for the following mesh size: 30x50.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
WaterWorker | |
1400 Division Road | |
West Warwick, RI 02893 | |
United States | |
877-324-8863 |
Facility : # 1 USA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pressurized Water Storage Tanks[1] | ||||
HT119B | 119 gal. | CLD 23 | MLTPL | |
HT14B | 14 gal. | CLD 23 | MLTPL | |
HT14HB | 14 gal. | CLD 23 | MLTPL | |
HT20B | 20 gal. | CLD 23 | MLTPL | |
HT2B | 2 gal. | CLD 23 | MLTPL | |
HT30B | 30 gal. | CLD 23 | MLTPL | |
HT32B | 32 gal. | CLD 23 | MLTPL | |
HT44B | 44 gal. | CLD 23 | MLTPL | |
HT4B | 4.4 gal. | CLD 23 | MLTPL | |
HT62B | 62 gal. | CLD 23 | MLTPL | |
HT6HB | 5.3 gal. | CLD 23 | MLTPL | |
HT86B | 86 gal. | CLD 23 | MLTPL | |
HT8B | 8.6 gal. | CLD 23 | MLTPL | |
[1] Certified Pressurized Water Storage Tanks may be sold with a union which is designated by the inclusion of a "U" in the model number. |
Watson-Marlow Bredel B.V. | |
Sluisstraat 7 | |
Delden 7491 GA | |
The Netherlands | |
31 74 377 0000 | |
Visit this company's website |
Facility : Wilmington, MA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Chemical Metering Pumps[1][2][3] | ||||
Apex 10 | 10 mm | CLD 23 | MLTPL | |
Apex 15 | 15 mm | CLD 23 | MLTPL | |
Apex 20 | 20 mm | CLD 23 | MLTPL | |
Apex 28 | 28 mm | CLD 23 | MLTPL | |
Apex 35 | 35 mm | CLD 23 | MLTPL | |
Bredel 10 | 10 mm | CLD 23 | MLTPL | |
Bredel 15 | 15 mm | CLD 23 | MLTPL | |
Bredel 20 | 20 mm | CLD 23 | MLTPL | |
Bredel 25 | 25 mm | CLD 23 | MLTPL | |
Bredel 32 | 32 mm | CLD 23 | MLTPL | |
Bredel 40 | 40 mm | CLD 23 | MLTPL | |
Bredel 50 | 50 mm | CLD 23 | MLTPL | |
Bredel 65 | 65 mm | CLD 23 | MLTPL | |
[1] Cleaning procedure: At ambient temperature: - Flush the hose with clean tap water for a minimum of 30 seconds - Fill the hose with clean tap water and leave for 1 hour - Empty the hose and re-flush with clean tap water for at least 30 seconds[2] Product certified for use with natural rubber and EPDM hoses. Product with EPDM hose is Certified for use with the following chemicals when dosed at TUL (typical use level) in NSF/ANSI/CAN 60: Acetic Acid (80%) Aluminum Chloride (50%) Aluminum chlorohydrate (40%) Aluminum Chlorohydrate/Polyaluminum Chloride (40%) Aluminum Sodium Sulfate (15%) Aluminum Sulfate (50%) Ammonia, aqueous (35%) Ammonium Hydroxide (29%) Ammonium Sulfate (45%) Calcium carbonate (65%) Calcium Chloride (15%) Calcium Hydroxide (50%) Calcium Hypochlorite (15%) Calcium Thiosulfate (30%) Chlorine dioxide (2%) Citric Acid (100%) Copper Sulfate (5%) Copper Sulfate (25%) Dipotassium Orthophosphate (50%) Disodium Orthophosphate (50%) Ferric Chloride (50%) Ferric Sulfate (60%) Ferrous Chloride (40%) Ferrous Sulfate (30%) Fluorosilicic acid (25%) Hydrochloric acid (38%) Hydrogen Peroxide (30%) Magnesium Sulfate (25%) Peracetic Acid (10%) Phosphoric acid (75%) Poly (Diallyldimethylammonium Chloride)(pDADMAC) (50%) Poly Aluminum Chloride (100%) Polyacrylamide (2.5%) Polyaluminum Chloride (45%) Polyaluminum Chlorosulfate (50%) Polyaluminum Hydroxychlorosulfate (75%) Polyaluminum Silicate Sulfate (66%) Polyaluminum Sulfate (50%) Polyphosphoric Acid (100%) Potassium Carbonate (47%) Potassium Chloride (34%) Potassium hydroxide (45%) Potassium Hydroxide (50%) Potassium Permanganate (20%) Potassium Tripolyphosphate (100%) Sodium Acid Pyrophosphate (12%) Sodium Aluminate (50%) Sodium Ascorbate (56%) Sodium Bicarbonate (100%) Sodium Bisulfate (50%) Sodium Carbonate (20%) Sodium Carbonate (85%) Sodium Chlorate - 100% Sodium Chloride (26%) Sodium Chlorite (7.5%) Sodium Dichloroisocyanurate (25%) Sodium Fluoride (4.0%) Sodium Hydroxide (50%) Sodium Hypochlorite (15%) Sodium Metabisulfite (50%) Sodium Percarbonate (15%) Sodium Permanganate (40%) Sodium Polyphosphates (35%) Sodium Silicate (100%) Sodium Sulfite (20%) Sodium Trimetaphosphate (20%) Sodium Tripolyphosphate (15%) Sulfur Dioxide (5%) Sulfuric acid (98.5%) Tetrapotassium Pyrophosphate (60%) Tetrasodium Pyrophosphate (7%) Tricalcium Phosphate (70%, slurry) Trichloroisocyanuric Acid (10%) Zinc Chloride (62%) Zinc Orthophosphate (100%) Zinc Sulfate (36%) Product with natural rubber hose is Certified for use with the following chemicals when dosed at TUL (typical use level) in NSF/ANSI/CAN 60: Aluminum chlorohydrate (40%) Aluminum Chlorohydrate/Polyaluminum Chloride (40%) Ammonia, aqueous (35%) Ammonium Hydroxide (29%) Calcium carbonate (65%) Calcium Chloride (15%) Calcium Hydroxide (50%) Calcium Hypochlorite (15%) Chlorine dioxide (2%) Copper Sulfate (5%) Copper Sulfate (25%) Dipotassium Orthophosphate (50%) Disodium Orthophosphate (50%) Ferric Sulfate (60%) Ferrous Sulfate (30%) Poly (Diallyldimethylammonium Chloride)(pDADMAC) (50%) Poly Aluminum Chloride (100%) Polyacrylamide (2.5%) Polyaluminum Chloride (45%) Polyaluminum Hydroxychlorosulfate (75%) Potassium Carbonate (47%) Potassium Chloride (34%) Potassium Hydroxide (45%) Potassium Hydroxide (50%) Potassium Permanganate (20%) Potassium Tripolyphosphate (100%) Sodium Acid Pyrophosphate (12%) Sodium Aluminate (50%) Sodium Ascorbate (56%) Sodium Bicarbonate (100%) Sodium Carbonate (20%) Sodium Carbonate (85%) Sodium Chlorate (100%) Sodium Chloride (26%) Sodium Chlorite (7.5%) Sodium Dichloroisocyanurate (25%) Sodium Fluoride (4.0%) Sodium Hydroxide (50%) Sodium Hypochlorite (15%) Sodium Metabisulfite (50%) Sodium Percarbonate (15%) Sodium Permanganate (40%) Sodium Polyphosphates (35%) Sodium Silicate (100%) Sodium Sulfite (20%) Sodium Trimetaphosphate (20%) Sodium Tripolyphosphate (15%) Tetrapotassium Pyrophosphate (60%) Tetrasodium Pyrophosphate (7%) Tricalcium Phosphate (70%, slurry) Zinc Chloride (62%) Zinc Orthophosphate (100%) Zinc Sulfate (36%)[3] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified. |
Watts Automatic Control Valves | |
1485 Tanoran Avenue | |
Woodland, CA 95776 | |
United States | |
530-666-2493 |
Facility : Woodland, CA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Valves[G] | ||||
Automatic Control Valve M100[1][2] | 1 1/4" - 16" | CLD 23 | MLTPL | |
Automatic Control Valve M6000[1][2] | 3" - 24" | CLD 23 | MLTPL | |
Automatic Control Valve S100[2][3] | 4" - 16" | CLD 23 | MLTPL | |
Automatic Control Valve S6000[2][3] | 6" - 24" | CLD 23 | MLTPL | |
[1] The following accessories are Certified for use with the globe or angle pattern control valve tubing and fittings: Model FBV-4, FBV-3C, LFFBV-4, LFFBV-3C Ball Valves (1/4" - 1") Figure 60 Flow Clean Strainer (1/4" - 1") 263SS Pressure Reducing Pilot Mechanical check option Anti-Cavitation Trim Option[2] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.[3] The following accessories are Certified for use with the globe or angle pattern control valve tubing and fittings: Model WBV-3, FBV-4, FBV-3C, LFFBV-4, LFFBV-3C Ball Valves (1/4" - 1") Figure 60 Flow Clean Strainer (1/4" - 1") 263SS Pressure Reducing Pilot Mechanical check option Anti-Cavitation Trim Option[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Watts Heating and Hot Water Solutions LLC, DBA Lync by Watts | |
425 West Everman Parkway | |
Fort Worth, TX 76134 | |
United States | |
817-335-9531 |
Facility : San Antonio, TX
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Filtration Devices/Components | ||||
LCH-150 | [1] | CLD 23 | MLTPL | |
[1] Certified for a minimum flow rate of 228,000 Liters per day. This product has not been tested or evaluated for point-of-entry (POE) use. |
Watts Regulator Company | |
815 Chestnut Street | |
North Andover, MA 01845 | |
United States | |
978-689-6249 |
Facility : Woodland, CA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Backflow Preventers[G] | ||||
(1)-DBF-(2)-(3)(4)(5)-(6)(7)-M2[1] | 2" - 48" | CLD 23 | MLTPL | |
757-X-YY-ZZ-TT[2] | 2 1/2" - 10" | CLD 23 | MLTPL | |
757a-X-YY-ZZ-TT[2] | 2 1/2" - 10" | CLD 23 | MLTPL | |
767-X-YY-ZZ-TT[2] | 2 1/2" - 10" | CLD 23 | MLTPL | |
767a-X-YY-ZZ-TT[2] | 2 1/2" - 10" | CLD 23 | MLTPL | |
957-X-YY-ZZ-TT[2] | 2 1/2" - 10" | CLD 23 | MLTPL | |
957a-X-YY-ZZ-TT[2] | 2 1/2" - 10" | CLD 23 | MLTPL | |
967-X-YY-ZZ-TT[2] | 2 1/2" - 10" | CLD 23 | MLTPL | |
967a-X-YY-ZZ-TT[2] | 2 1/2" - 10" | CLD 23 | MLTPL | |
[1] (1) Size: 02-48 (2) Body style 03 - Lug 04 - Wafer (3) Body material 1 - Cast iron 2 - Ductile iron (4) Disc material 2 - Aluminum bronze 3 - SS 316 (5) Shaft material 1 - Stainless steel 416 2 - Stainless steel 316 3 - Stainless steel 431 (6) Seat material 1 - EPDM (Canada) 4 - EPDM (US) (7) Operator 0 - No handle 5 - Standard handle (10-position) G - Gear operator P - Positioning/locking kit with handle[2] X - Valve pattern Blank - Straight N - N pattern Z - Z pattern YY - Backflow shutoff designation where 2 per units may be mixed like NRS x PIV BFG - Butterfly valve DNRS - Domestic non-rising stem gate DOSY - Domestic outside stem and yoke gate DPIV - Domestic post indicator gate NRS - Non-rising stem gate OSY - Outside stem and yoke gate PIV - Post indicator gate QT - Quarter turn ball valve ZZ - Inlet and outlet connections Blank - Flange by flange FxG - Flange by groove GxF - Groove by flange GxG - Groove by groove TT - Strainer options Blank - No strainer S - 77F-DI-FDA-125 strainer S-SS - Stainless strainer 8000F[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1][G] | ||||
TR (X)(Y) | 4" - 12" | CLD 23 | MLTPL | |
[1] May consist of any of below: (X) Inlet connection GRV - Grooved end CIPS - Cast iron pipe size FLG - Flanged end THR - Thread (Y) Outlet connection GRV - Grooved end CIPS - Cast iron pipe size FLG - Flanged end THR - Thread[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Fort Worth, TX
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1][G] | ||||
TR (X)(Y) | 4" - 12" | CLD 23 | MLTPL | |
[1] May consist of any of below: (X) Inlet connection GRV - Grooved end CIPS - Cast iron pipe size FLG - Flanged end THR - Thread (Y) Outlet connection GRV - Grooved end CIPS - Cast iron pipe size FLG - Flanged end THR - Thread[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Watts Regulator Company | |
815 Chestnut Street | |
North Andover, MA 01845 | |
United States | |
978-689-6165 | |
Visit this company's website |
Facility : Randolph, MA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Thermal Expansion Tanks[G] | ||||
PLT-35 | 14 gal. | D. HOT | MLTPL | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Franklin, NH
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Backflow Preventers[G] | ||||
(XX)007-YY-ZZ[1] | 1/2" | CLD 23 | MLTPL | |
(XX)007M1-YY-ZZ[1] | 1" - 2" | CLD 23 | MLTPL | |
(XX)007M2-YY-ZZ[1] | 1 1/4" - 1 1/2" | CLD 23 | MLTPL | |
(XX)007M3-YY-ZZ[1] | 3/4" | CLD 23 | MLTPL | |
(XX)009-YY-ZZ[1] | 1/2" | CLD 23 | MLTPL | |
(XX)009M2-YY-ZZ[1] | 1" - 2" | CLD 23 | MLTPL | |
(XX)009M3-YY-ZZ[1] | 3/4" | CLD 23 | MLTPL | |
LF iDroset CSD | 1/2" - 1" | C. HOT | MLTPL | |
LF07SU2-2 | 1" - 2" | CLD 23 | MLTPL | |
LF07SU2-3 | 1" - 2" | CLD 23 | MLTPL | |
LF07SU4-5 | 1" - 2" | CLD 23 | MLTPL | |
LF709[2] | 2 1/2" - 10" | CLD 23 | MLTPL | |
LF719[3] | 1/2" - 2" | CLD 23 | MLTPL | |
LF850(1)(2)[4] | 2 1/2" - 10" | CLD 23 | MLTPL | |
LF856(1)(2)(3)[5] | 2 1/2" - 10" | CLD 23 | MLTPL | |
LF860(1)(2)[4] | 2 1/2" - 10" | CLD 23 | MLTPL | |
LF866(1)(2)(3)[5] | 2 1/2" - 10" | CLD 23 | MLTPL | |
LF876-W[1][2][3][5] | 4" - 10" | CLD 23 | MLTPL | |
LF876-WZ[1][2][3][5] | 4" - 10" | CLD 23 | MLTPL | |
LF876V (1)(2)(3)[5] | 2 1/2" - 10" | CLD 23 | MLTPL | |
LF886-W[1][2][3][5] | 4" - 10" | CLD 23 | MLTPL | |
LF886-WZ[1][2][3][5] | 4" - 10" | CLD 23 | MLTPL | |
LF886V (1)(2)(3)[5] | 2 1/2" - 10" | CLD 23 | MLTPL | |
LF909[2] | 2 1/2" - 6" | CLD 23 | MLTPL | |
LF909-X[6] | 3/4" - 1" | CLD 23 | MLTPL | |
LF909M1[2] | 8" - 10" | CLD 23 | MLTPL | |
LF909M1-X[6] | 1 1/4" - 2" | CLD 23 | MLTPL | |
LF919[3] | 1/2" - 2" | CLD 23 | MLTPL | |
LFB6080G2-SS | 1/2" - 4" | C. HOT | MLTPL | |
LFB6081G2-SS | 1/2" - 3" | C. HOT | MLTPL | |
LFU007-YY-ZZ[1] | 1/2" | CLD 23 | MLTPL | |
LFU007M1-YY-ZZ[1] | 1" - 2" | CLD 23 | MLTPL | |
LFU007M2-YY-ZZ[1] | 3/4" - 1 1/2" | CLD 23 | MLTPL | |
LFU009-YY-ZZ[1] | 1/2" | CLD 23 | MLTPL | |
LFU009M2-YY-ZZ[1] | 3/4" - 2" | CLD 23 | MLTPL | |
[1] XX - LF - Lead free SS - Stainless steel YY - LF - Supplied without shut-off valves QT - Supplied with shut-off valves LBV - Supplied without shut-off valves UL - Fire application approved CULUS - Fire application approved ZZ - Any combination of the following: AG - Air gap Blank - Standard unit BC - Brass cap CT (or C & T) - Cap and teather FP - Gear Operated Ball Valve FS - Flood Sensor FZ - Freeze Sensor LH - Locking handles S - Strainer (LF777SI) SH - Stainless handles CULUS - Fire application approved Z3 - Stainless handles and nuts Z4 - Non-removable handles Z5 - Special dipped test co*ck adapter[2] Suffixes may consist of the following: LF - Assembly ships without isolation shut-off valves NRS - Non-rising stem DNRS - Domestic non-rising stem OSY - Outside stem and yoke DOSY - Domestic outside stem and yoke -S - FDA model 77F-DI-FDA-125 AG - Air gap[3] Products may include one or more of the following prefixes or suffixes: S - Lead Free Strainer LF (as suffix) - Less fitting LF (as prefix) - Lead free QT - Quarter turn ball valve Options for non-wetted: AG - Air gap C & T - Cap and tether test co*ck covers LH - Locking handled ball valves SH - Stainless handled ball valves[4] Suffixes may consist of: (1) Isolation Shut-off Valve Options: LG - Assembly ships without isolation shut-off valves NRS - Non-rising stem DNRS - Domestic mon-rising stem OSY - Outside stem and yoke DOSY - Domestic outside stem & yoke (2) Installation Option: LH - Test co*cks mounted for right-to-left flow installation[5] (1) Isolation Shut-off Valve Options LG - Assembly Ships Without Isolation Shut-off Valves NRS - Non-Rising Stem DNRS - Domestic Non-Rising Stem OSY - Outside Stem & Yoke DOSY - Domestic Outside Stem & Yoke (2) Meter in Bypass Line GPM - Gallon Totalizing Meter CFM - Cubic-Feet Totalizing Meter LM - Assembly Ships With Straight Plastic Pipe for Installation of Customer's Meter (3) Installation Option LH - Test co*cks & Bypass Line mounted for right-to-left flow installation[6] (X) - Any combination of the following, appearing in the order below: AG - Air gap HW - Stainless steel check modules for harsh water conditions LF - Without shut-off valves QT - Quarter turn ball valves S - Strainer[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Valves[G] | ||||
(D) (LF) 25AUB (X)[7] | 1/2" - 2" | CLD 23 | MLTPL | |
122-ABNF1 | 1/2" | C. HOT | MLTPL | |
52572NL | 1/2" | CLD 23 | MLTPL | |
52573NL | 3/4" | CLD 23 | MLTPL | |
52574NL | 1" | CLD 23 | MLTPL | |
52577NL | 1/2" | CLD 23 | MLTPL | |
52587NL | 3/4" | CLD 23 | MLTPL | |
52588NL | 1" | CLD 23 | MLTPL | |
IS2075VL | 3/4" | C. HOT | MLTPL | |
IS2100VL | 1" | C. HOT | MLTPL | |
IS2150VL | 1 1/2" | C. HOT | MLTPL | |
IS2200VL | 2" | C. HOT | MLTPL | |
IS2E075VL | 3/4" | C. HOT | MLTPL | |
IS2E100VL | 1" | C. HOT | MLTPL | |
IS2E150VL | 1 1/2" | C. HOT | MLTPL | |
IS2E200VL | 2" | C. HOT | MLTPL | |
LF CSM-61-M1-S | 1/2" - 1" | D. HOT | MLTPL | |
LF CSM-61-M2-S | 1 1/4" - 2" | D. HOT | MLTPL | |
LF-223[8] | 1/2" - 2" | C. HOT | MLTPL | |
LF-223-U[8] | 1/2" - 2" | C. HOT | MLTPL | |
LF-N223[8] | 2 1/2" - 3" | C. HOT | MLTPL | |
LF-N223-M1[8] | 3" | C. HOT | MLTPL | |
LF-N223-M2[8] | 2 1/2" | C. HOT | MLTPL | |
LF-N223F-M2[8] | 3" | C. HOT | MLTPL | |
LF-N45(X)[9] | 1/2" - 2" | CLD 23 | MLTPL | |
LF-N55(X)[9] | 1/2" - 2" | CLD 23 | MLTPL | |
LF-N55XL | 3/4", 1" | CLD 23 | MLTPL | |
LF-N55XL-DU | 3/4", 1" | CLD 23 | MLTPL | |
LF1170CM2-(X)[12] | 1/2" - 1" | C. HOT | MLTPL | |
LF1170M2-(X)[12] | 1/2" -1" | C. HOT | MLTPL | |
LFIS200 | 2" | C. HOT | MLTPL | |
LFIS200VL | 2" | C. HOT | MLTPL | |
LFL1170M2-(X)[12] | 1/2" - 1" | C. HOT | MLTPL | |
LFMMVM1-(X)[12] | 1/2" -1" | C. HOT | MLTPL | |
LFRC105-CEF x CEF | 3/4" - 1" | CLD 23 | MLTPL | |
LFRC105-PEX x PEX | 3/4" - 1" | CLD 23 | MLTPL | |
LFRC105-THD x U | 3/4" - 1" | CLD 23 | MLTPL | |
P60-M1[10] | 1/4" | CLD 23 | MLTPL | |
P60-M1-4[10] | 1/4" | CLD 23 | MLTPL | |
Series LF-U5[11] | 1/2" - 2" | CLD 23 | MLTPL | |
[7] (D) Domestic manufacture (X) May be any combination of the following: CEF - Cold Expansion Fittings CPVC - CPVC tubing connection DU - Double union connection G - Gauge tapping GG - Gauge tapped with gauge HP - High pressure LP - Low pressure M3-Z6 - Water meter connections PEX - PEX tubing connection PR - Press QC - Quick Connect S - Solder pipe connection SC - Sealed cage S-DU - Double union solder inlet & outlet connections STD - Standard model Z3 - Sealed cage/corrosion resistant screws Z-5 - 28 PSI Setting Z7 - 400 psi Z-9 - 20 PSI Setting Z10 - No union connection Z-13 - 50 PSI Setting-Standard Setting[8] The trade names may also indicate one or more of the following options, in any order: B - Built-in bypass BS - British thread G - Gauge tapping GG - Gauge tapped with gauge HP - High pressure LP - Low pressure S - Strainer attached STD - Standard Z3 - Sealed cage/corrosion resistant screws Z8 - Long adjusting screw[9] (X) May be any combination of the following: B - Bypass feature CEF - Cold Expansion Fittings CPVC - CPVC tubing connection DU - Double union connection EZ - Easilty adjustable w/visible setting indicator G - Gauge tapping HP - High pressure LP - Low pressure M1 - First model PEX - PEX tubing connection PR - Press S - Solder connection SBRASS - Sweat with brass tailpiece THD - Standard threaded pipe connection, when used in combination with another connection type U - Single union connection W - Special body end threads Z6 - Water meter connections 070 - Pre-Set 70 PSI[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [10] Suffixes may consist of the following: 0-125 - Pressure rating 12 WO-El - Special customer QD - Quick disconnect RK - Repair kit V - Viton O-Ring Z(X) - Special customer[11] B - Bypass feature G - Guage tapping GG - Guage tapped with guage HP - High pressure LP - Low pressure M3-Z6 - Water meter connections (3/4" & 1") S - Solder pipe connection SC - Sealed cage Z3 - Sealed cage/corrosion resistant screws Z9 - NPT Male thread union inlet (3/4")[12] (X) Represents the following: CEF - Cold Expansion Fittings CPVC - CPVC Ends PEX - PEX Ends QC - Quick Connects Ends UT - FNPT Ends US - C12200 Sweat (Solder) Ends |
[13] The model numbers are: 1" PAP-M025-UNS 3/4” PAP-S020-UNS 1/2” PAP-S015-UNS
Mechanical Plumbing Devices
Trade Designation | ||||
End Point Control Valves[G] | ||||
0.375 LFUSG-B-M3[Q] | ||||
0.375 LFUSG-B-QC-M3[Q] | ||||
0.375 LFUSG-B-QC-SC-M3[Q] | ||||
0.375 LFUSG-B-SC-M3[Q] | ||||
0.375 LFUSG-HWP[1][Q] | ||||
0.375 LFUSG-HWP-SC[1][Q] | ||||
[1] Optional QC indicating quick connect fitting.[Q] This product meets the reduced Q test statistic criteria of 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61. | ||||
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Spindale, NC
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Backflow Preventers[G] | ||||
LF7R[1] | 1/2" - 1" | C. HOT | MLTPL | |
[1] Two suffix codes, denoting the connections, follow the LF7R. 2 - NPTF; female pipe connection [not a union] (1/2", 3/4", 1") 3 - NPTM; male pipe connection [not a union] (3/4") 5 - Meter thread male pipe connection [not a union] (1") U2 - NPTF female union pipe connection (1/2", 3/4", 1") U2L - NPTF; female union pipe connection (1/2", 3/4", 1") with a Longer Lay Length U3 - NPTM; male union pipe connection (3/4") U4 - Meter thread female union pipe connection (3/4") 10 - Meter thread union connection (1")[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Valves[G] | ||||
263A[2] | 1/4" - 1/2" | CLD 23 | MLTPL | |
LF1KB27 | 1/2" | CLD 23 | MLTPL | |
LF1KBZ6 | 1/8" | CLD 23 | MLTPL | |
LF1KBZ7 | 1/8" | CLD 23 | MLTPL | |
LF1KBZ8 | 1/4" | CLD 23 | MLTPL | |
LF1KBZ9 | 1/4" | CLD 23 | MLTPL | |
LF1KCL1 | 3/4" | CLD 23 | MLTPL | |
LF1KCL2 | 3/4" | CLD 23 | MLTPL | |
LF1KCL3 | 1/2" | CLD 23 | MLTPL | |
LF1KCL4 | 1/2" | CLD 23 | MLTPL | |
LF263A-X-YY[2] | 1/4" - 1/2" | CLD 23 | MLTPL | |
LF26A-X-YY[2] | 1/8" - 1/2" | CLD 23 | MLTPL | |
LFTWHG2-(XX)-(YY)-RV-(Z)[3] | 3/4" | D. HOT | MLTPL | |
P60-M1[4] | 1/4" | CLD 23 | MLTPL | |
P60-M1-4[4] | 1/4" | CLD 23 | MLTPL | |
SS263APM1-X-YY[2] | 1/4" - 1/2" | CLD 23 | MLTPL | |
[2] SS - Stainless Steel LF - Lead free brass X - Options Blank - Standard model X - Slotted adjusting screw V - Viton elastomers RC - ROHS compliant P - Stainless steel seat and hex head adjusting screw G - Pressure gage ISO - British threaded ends Z - Customer special YY - Options Pressure ratings[3] XX - Water Line Connection Type C - Cold Water Valve FS - Female Sweat FT - Female Pipe Thread FT-ST - Female Pipe Thread with swivel tee connection H - Hot Water Valve HC - Hot and Cold Valve shipped in one box HCD - Hot Valve (red handle), Recirc. Valve (orange handle) and Cold Valve (blue handle) PC - Press Connection YY - Valve Type Z - Label type ABC - OEM Customer Labeled Blank - Watts labeled[4] Suffixes may consist of the following: 0-125 - Pressure rating 12 WO-El - Special customer QD - Quick disconnect RK - Repair kit V - Viton O-Ring Z(X) - Special customer[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : St Pauls, NC
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Valves[1][G] | ||||
(1)-BF-(2)-(3)(4)(5)-(6)(7)-M2 | 2" - 48" | CLD 23 | MLTPL | |
(1)-DBF-(2)-(3)(4)(5)-(6)(7)-M2 | 2" - 48" | CLD 23 | MLTPL | |
LFIS150 (81020206) | 1 1/2" | C. HOT | MLTPL | |
LFIS200 (81020207) | 2" | C. HOT | MLTPL | |
[1] (1) Size 02 - 48 (2) Body style 03 - Lug 04 - Wafer (3) Body material 1 - Cast iron 2 - Ductile iron (4) Disc material 2 - Aluminum bronze 3 - SS 316 (5) Shaft material 1 - Stainless steel 416 2 - Stainless steel 316 3 - Stainless steel 431 (6) Seat material 1 - EPDM (Canada) 2 - EPDM (US) (7) Operator 0 - No handle 5 - Standard handle (10-position) G - Gear operator P - Positioning/locking kit with handle[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Watts Regulator Company | |
815 Chestnut Street | |
North Andover, MA 01845 | |
United States | |
978-689-1811 |
Facility : # 1 USA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe[G] | ||||
PlumbFLOW | 1/8" - 2" | C. HOT | PEX | |
WaterPEX | 1/8" - 2" | C. HOT | PEX | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Weicon GmbH & Co. KG | |
Königsberger Strasse 255 | |
DE-48157 Münster | |
Germany | |
49 251 932261 |
Facility : # 1 USA
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Patching Materials | ||||
Repair Stick Copper | [1] | C. HOT | EPOXY | |
Repair Stick Plastic | [1] | C. HOT | EPOXY | |
Repair Stick Stainless Steel | [1] | C. HOT | EPOXY | |
Repair Stick Steel | [1] | C. HOT | EPOXY | |
[1] The exposed surface area of each sealant in a household distribution system shall not exceed 1.3 sq. cm/L or .2 sq. in./L |
Weicon GmbH & Co. KG | |
Konigsberger Str. 255 | |
DE-48157 Munster | |
Germany | |
49 251 93 22 0 | |
Visit this company's website |
Facility : # 2 USA
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Patching Materials | ||||
Repair Stick Plastic | [1] | C. HOT | EPOXY | |
[1] The exposed surface area of each sealant in a household distribution system shall not exceed 1.3 sq. cm/L or .2 sq. in./L | ||||
Sealants | ||||
Repair Stick Copper | [1] | C. HOT | EPOXY | |
Repair Stick Multi Purpose[G] | [1] | C. HOT | EPOXY | |
Repair Stick Stainless Steel[G] | [1] | C. HOT | EPOXY | |
Repair Stick Steel[G] | [1] | C. HOT | EPOXY | |
[1] The exposed surface area of each sealant in a household distribution system shall not exceed 1.3 sq. cm/L or .2 sq. in./L[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Welding Outlets, Inc. | |
1341 Hill Road | |
Houston, TX 77039 | |
United States | |
888-610-0777 | |
281-609-8749 | |
Visit this company's website |
Facility : Houston, TX
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1][G] | ||||
45 Degree 3D Elbow | 1/2" - 24" | C. HOT | SS | |
45 Degree Long Radius Elbow | 1/2" - 24" | C. HOT | SS | |
45 Degree Socket Weld Elbow | 1/8" - 4" | C. HOT | SS | |
45 Degree Threaded Elbow | 1/8" - 4" | C. HOT | SS | |
90 Degree 3D Elbow | 1/2" - 24" | C. HOT | SS | |
90 Degree Long Radius Elbow | 1/2" - 24" | C. HOT | SS | |
90 Degree Short Radius Elbow | 1/2" - 24" | C. HOT | SS | |
90 Degree Socket Weld Elbow | 1/8" - 4" | C. HOT | SS | |
90 Degree Threaded Elbow | 1/8" - 4" | C. HOT | SS | |
Beveled Nipple Branchette | 1/8" - 24" | C. HOT | SS | |
Bleed Ring[2] | 1/2" - 24" | C. HOT | SS | |
Blind Flange[3] | 1/2" - 24" | C. HOT | SS | |
Bull Plug | 1/8" - 12" | C. HOT | SS | |
Butt Weld Branchette | 1/8" - 24" | C. HOT | SS | |
Butt Weld Cap | 1/2" - 24" | C. HOT | SS | |
Butt Weld Elbow Branchette | 1/8" - 24" | C. HOT | SS | |
Butt Weld Insert Branchette | 1/8" - 24" | C. HOT | SS | |
Butt Weld Lateral Branchette | 1/8" - 24" | C. HOT | SS | |
Combination Boss | 1/8" - 4" | C. HOT | SS | |
Combination Couplet | 1/8" - 4" | C. HOT | SS | |
Combination Socket Weld X Threaded Coupling | 1/8" - 4" | C. HOT | SS | |
Combination Socket Weld X Threaded Tee | 1/8" - 4" | C. HOT | SS | |
Combination Threaded X Socket Weld Coupling | 1/8" - 4" | C. HOT | SS | |
Combination Threaded X Socket Weld Tee | 1/8" - 4" | C. HOT | SS | |
Concentric Reducer | 1/2" - 24" | C. HOT | SS | |
Concentric Swage | 1/8" - 12" | C. HOT | SS | |
Eccentric Reducer | 1/2" - 24" | C. HOT | SS | |
Eccentric Swage | 1/8" - 12" | C. HOT | SS | |
Flanged Branchette[3] | 1/8" - 24" | C. HOT | SS | |
Flanged Insert Branchette[3] | 1/8" - 24" | C. HOT | SS | |
Flanged Nozzle[3] | 1/2" - 24" | C. HOT | SS | |
Flush Bushing | 1/8" - 4" | C. HOT | SS | |
Hex Bushing | 1/8" - 4" | C. HOT | SS | |
Hex Head Plug | 1/8" - 4" | C. HOT | SS | |
Lap Joint Flange[3] | 1/2" - 24" | C. HOT | SS | |
Lap Joint Stub End | 1/2" - 24" | C. HOT | SS | |
Long Weld Neck Flange[3] | 1/2" - 24" | C. HOT | SS | |
Pipe Nipple Beveled Both Ends | 1/8" - 12" | C. HOT | SS | |
Pipe Nipple Beveled X Plain | 1/8" - 12" | C. HOT | SS | |
Pipe Nipple Beveled X Threaded | 1/8" - 12" | C. HOT | SS | |
Pipe Nipple Plain Both Ends | 1/8" - 12" | C. HOT | SS | |
Pipe Nipple Plain X Threaded | 1/8" - 12" | C. HOT | SS | |
Pipe Nipple Threaded Both Ends | 1/8" - 12" | C. HOT | SS | |
Plain Nipple Branchette | 1/8" - 24" | C. HOT | SS | |
Reducing Cross | 1/2" - 24" | C. HOT | SS | |
Reducing Lateral | 1/2" - 24" | C. HOT | SS | |
Reducing Tee | 1/2" - 24" | C. HOT | SS | |
Reducing Wye | 1/2" - 24" | C. HOT | SS | |
Round Head Plug | 1/8" - 4" | C. HOT | SS | |
Slip On Flange[3] | 1/2" - 24" | C. HOT | SS | |
Slip-On Orifice Flange[3] | 1/2" - 24" | C. HOT | SS | |
Socket Weld Boss | 1/8" - 4" | C. HOT | SS | |
Socket Weld Branchette | 1/8" - 24" | C. HOT | SS | |
Socket Weld Cap | 1/8" - 4" | C. HOT | SS | |
Socket Weld Coupling | 1/8" - 4" | C. HOT | SS | |
Socket Weld Cross | 1/8" - 4" | C. HOT | SS | |
Socket Weld Elbow Branchette | 1/8" - 24" | C. HOT | SS | |
Socket Weld Flange[3] | 1/2" - 24" | C. HOT | SS | |
Socket Weld Half Coupling | 1/2" - 24" | C. HOT | SS | |
Socket Weld Insert Branchette | 1/8" - 24" | C. HOT | SS | |
Socket Weld Lateral | 1/8" - 4" | C. HOT | SS | |
Socket Weld Lateral Branchette | 1/8" - 24" | C. HOT | SS | |
Socket Weld Pipe Union | 1/8" - 4" | C. HOT | SS | |
Socket Weld Plug | 1/8" - 4" | C. HOT | SS | |
Socket Weld Reducing Coupling | 1/8" - 4" | C. HOT | SS | |
Socket Weld Reducing Insert | 1/4" - 4" | C. HOT | SS | |
Socket Weld Reducing Tee | 1/8" - 4" | C. HOT | SS | |
Socket Weld Tee | 1/8" - 4" | C. HOT | SS | |
Socket Weld Union | 1/8" - 3" | C. HOT | SS | |
Spectacle Blind | 1/2" - 36" | C. HOT | SS | |
Square Head Plug | 1/8" - 4" | C. HOT | SS | |
Straight Cross | 1/2" - 24" | C. HOT | SS | |
Straight Lateral | 1/2" - 24" | C. HOT | SS | |
Straight Tee | 1/2" - 24" | C. HOT | SS | |
Straight Wye | 1/2" - 24" | C. HOT | SS | |
Studding (Studded) Outlet | 1/2" - 24" | C. HOT | SS | |
Threaded Boss | 1/8" - 4" | C. HOT | SS | |
Threaded Branchette | 1/8" - 24" | C. HOT | SS | |
Threaded Cap | 1/8" - 4" | C. HOT | SS | |
Threaded Couplet | 1/8" - 4" | C. HOT | SS | |
Threaded Coupling | 1/8" - 4" | C. HOT | SS | |
Threaded Cross | 1/8" - 4" | C. HOT | SS | |
Threaded Elbow Branchette | 1/8" - 24" | C. HOT | SS | |
Threaded Flange[3] | 1/2" - 24" | C. HOT | SS | |
Threaded Half Coupling | 1/8" - 4" | C. HOT | SS | |
Threaded Insert Branchette | 1/8" - 24" | C. HOT | SS | |
Threaded Lateral | 1/8" - 4" | C. HOT | SS | |
Threaded Lateral Branchette | 1/8" - 24" | C. HOT | SS | |
Threaded Nipple Branchette | 1/8" - 24" | C. HOT | SS | |
Threaded Pipe Union | 1/8" - 4" | C. HOT | SS | |
Threaded Reducing Coupling | 1/8" - 4" | C. HOT | SS | |
Threaded Reducing Tee | 1/8" - 4" | C. HOT | SS | |
Threaded Tee | 1/8" - 4" | C. HOT | SS | |
Threaded Union | 1/8" - 3" | C. HOT | SS | |
Weld Neck Flange[3] | 1/2" - 24" | C. HOT | SS | |
Weld Neck Orifice Flange[3] | 1/2" - 24" | C. HOT | SS | |
[1] Parts may be Threaded or Unthreaded.[2] The bleed ring may be RF (Raised Face) or RTJ (Ring Type Joint), male, female-octagonal, oval socket weld, or threaded.[3] Flanges may consist of Flat Face (FF), Raised Face (RF), or Ring Type Joint (RTJ).[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Weslor Enterprises, Inc. | |
924 Sohn Alloway Road | |
Lyons, NY 14489 | |
United States | |
315.871.4405 |
Facility : Lyons, NY
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Miscellaneous Treatment Devices/Components[1][2] | ||||
Water Filtration Vessel | 200 gal - 1000 gal | CLD 23 | MLTPL | |
[1] Product requires a pre-service flush at a flow rate of 200 gallons per minute for four (4) minutes using tap water.[2] Certified product does not include a pressure relief valve. |
WesTech Engineering, Inc. | |
600 Arrasmith Trail | |
Ames, IA 50010 | |
United States | |
515-268-8521 |
Facility : New Bedford, MA
Process Media
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Adsorption Media | ||||
Adsorption Clarifier® Media[1] | 2.5 mm - 2.8 mm | CLD 23 | PE | |
[1] Certification is based on a bed depth up to 4 feet with a minimum flow rate of 10 gpm per square foot. |
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
Facility : West Jordan, UT
Process Media
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Adsorption Media[1] | ||||
Compressible Media | 40mm - 50mm | CLD 23 | SYN | |
[1] Media use not to exceed 1450 g/ft^2 in a vertical column, and for a minimum flow rate of 5 gpm/ft^2. | ||||
Clarifier Media[1] | ||||
Compressible Media | 40mm - 50mm | CLD 23 | SYN | |
[1] Media use not to exceed 1450 g/ft^2 in a vertical column, and for a minimum flow rate of 5 gpm/ft^2. |
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
WesTech Engineering, Inc. | |
600 Arrasmith Trail | |
Ames, IA 50010 | |
United States | |
515-268-8400 | |
Visit this company's website |
Facility : Freeport, IL
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Filter Underdrain | ||||
Concrete Insert | [1] | CLD 23 | MLTPL | |
Underdrain Nozzle | [1] | CLD 23 | MLTPL | |
[1] Certified sizes are as follows: Concrete Insert - Multiple Pan Form - 541 sq. in./sq. ft. Underdrain Nozzle - 3014 sq. in./sq. ft. | ||||
Water Treatment Devices | ||||
Pan Form | [1] | CLD 23 | MLTPL | |
Underdrain Nozzle | [1] | CLD 23 | MLTPL | |
[1] Certified sizes are as follows: Concrete Insert - Multiple Pan Form - 541 sq. in./sq. ft. Underdrain Nozzle - 3014 sq. in./sq. ft. |
Facility : Holiday City, OH
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Filter Underdrain | ||||
Multiblock Filter Underdrain | [1] | CLD 23 | PE | |
Multicrete II Pan Form | [2] | CLD 23 | HDPE | |
[1] Certified for a minimum flow of 2 gallons/minute/square foot of filter surface area.[2] Certified for a minimum flow of 1.5 gallons/minute/square foot of filter surface area. |
Western Waterworks Supply | |
1209 3rd Avenue North | |
Nampa, ID 83687 | |
United States | |
208-463-2948 | |
Visit this company's website |
Facility : Nampa, ID
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe Spools[G] | ||||
Stainless Steel 304L Pipe Spools | 3" - 24" | CLD 23 | SS | |
Stainless Steel 316L Pipe Spools | 3" - 24" | CLD 23 | SS | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Westfall Manufacturing Company, Inc. | |
15 Broad Common Road | |
Bristol, RI 02809 | |
United States | |
888-928-3747 | |
401-253-3799 | |
Visit this company's website |
Facility : Bristol, RI
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Miscellaneous Process Devices/Components[1] | ||||
Model 2800 316 SS Static Mixers | 1/4" - 300"[2] | CLD 23 | MLTPL | |
Model 2800 CPVC Static Mixers | 1/4" - 300"[2] | CLD 23 | MLTPL | |
Model 2800 Hastelloy Static Mixers | 1/4" - 300"[2] | CLD 23 | MLTPL | |
Model 2800 PVC Static Mixers | 1/4" - 300"[2] | CLD 23 | MLTPL | |
WESTFALL MODEL 6000 STATIC MIXER | 1" - 120"[3] | CLD 23 | MLTPL | |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.[2] Certified for installation on pipes 1/4" - 300" in diameter.[3] Certified for installation on pipes 1" - 120" in diameter. Certified product does not include ports, injection nozzles or gaskets. |
Westlake Compounds LLC, a Westlake Chemical Corporation | ![]() |
210 Industrial Drive North | |
Madison, MS 39110 | |
United States | |
601-206-3255 | |
Visit this company's website |
Facility : Aberdeen, MS
Potable Water Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | End Use | Temp | Material | |
Potable Water Materials[1] | ||||
3085 White 1575 | P | CLD 23 | PVC | |
4526 Orange 25[2] | P | C. HOT | CPVC | |
6907 Blue 83[3] | F | CLD 23 | PVC | |
7048A Black 26 | A | CLD 23 | PVC | |
7048A Gray 50[4] | A | CLD 23 | PVC | |
7048A Gray 82[4] | A | CLD 23 | PVC | |
7048A White 50 | A | CLD 23 | PVC | |
7140 Brown 311 | P | CLD 23 | PVC | |
7140 White 94 | P | CLD 23 | PVC | |
7181 White 66[2] | A | CLD 23 | PVC | |
7434 Black 11 | A, F | CLD 23 | PVC | |
7434 Blue 123 | A,F | CLD 23 | PVC | |
7434 Blue 123 | A, F | CLD 23 | PVC | |
7434 Gray 73 | A,F | CLD 23 | PVC | |
7434 Red 81 | A, F | CLD 23 | PVC | |
7434 Red 82 | A, F | CLD 23 | PVC | |
7434 White 24 | A,F | CLD 23 | PVC | |
7800 Gray 471[4] | A | CLD 23 | PVC | |
7800 Natural 00[4] | A | CLD 23 | PVC | |
9246 Clear 08[5] | A | CLD 23 | PVC | |
9246 Clear 136[5] | A | CLD 23 | PVC | |
9260 Clear 136[5] | A | CLD 23 | PVC | |
GN HD-5009 White 24[4] | A,F | CLD 23 | PVC | |
GN HL-5009 White 24 | A, F | CLD 23 | PVC | |
Georgia Gulf 3152 Natural 00 | P | CLD 23 | PVC | |
Georgia Gulf 5009 Gray 73 | A,F | CLD 23 | PVC | |
Georgia Gulf 7521 White 24 | A,F | CLD 23 | PVC | |
Georgia Gulf DL-5009 Gray 73[2] | A,F | CLD 23 | PVC | |
Georgia Gulf DL-5009 White 24[2] | A,F | CLD 23 | PVC | |
Georgia Gulf HD 5009 White 24[4] | A,F | CLD 23 | PVC | |
Georgia Gulf HR-5009 White 772[4] | A,F | CLD 23 | PVC | |
Georgia Gulf LR-5009 Gray 251[4] | A,F | CLD 23 | PVC | |
Georgia Gulf LR-5009 Gray 251 | A,F | CLD 23 | PVC | |
Georgia-Gulf 3150 White 125 | P | CLD 23 | PVC | |
Georgia-Gulf 3152 Gray 434 | P | CLD 23 | PVC | |
Georgia-Gulf 3152 White 125 | P | CLD 23 | PVC | |
Georgia-Gulf 3401 White 125 | P | CLD 23 | PVC | |
Georgia-Gulf 4345 Orange 25 | P | C. HOT | CPVC | |
Georgia-Gulf 5009 Gray 251[4] | A,F | CLD 23 | PVC | |
Georgia-Gulf 5009 Gray 252[4] | A,F | CLD 23 | PVC | |
Georgia-Gulf 5009 Gray 309[4] | A,F | CLD 23 | PVC | |
Georgia-Gulf 5009 White 24[4] | A,F | CLD 23 | PVC | |
Georgia-Gulf 5034 Gray 02 | F | CLD 23 | PVC | |
Georgia-Gulf 5034 Gray 73 | F | CLD 23 | PVC | |
Georgia-Gulf 5034 White 24 | F | CLD 23 | PVC | |
Georgia-Gulf 6320 White 24 | F | CLD 23 | PVC | |
Georgia-Gulf 6380 Clear 01 | F | CLD 23 | PVC | |
Georgia-Gulf 6380J Clear 01 | F | CLD 23 | PVC | |
Georgia-Gulf 7107 Gray 341 | F | CLD 23 | PVC | |
Georgia-Gulf 7221 Gray 02 | A,F | CLD 23 | PVC | |
Georgia-Gulf 7221 Gray 252 | A,F | CLD 23 | PVC | |
Georgia-Gulf 7221 Gray 350 | A,F | CLD 23 | PVC | |
Georgia-Gulf 7221 White 24 | A,F | CLD 23 | PVC | |
Georgia-Gulf CL-6380 Clear 01 | F | CLD 23 | PVC | |
Georgia-Gulf CL-6380J Clear 01 | F | CLD 23 | PVC | |
Georgia-Gulf HR-5009 Black 11[4] | A,F | CLD 23 | PVC | |
Georgia-Gulf HR-5009 Gray 73[4] | A,F | CLD 23 | PVC | |
Georgia-Gulf HR-5009 Green 83 | A,F | CLD 23 | PVC | |
Georgia-Gulf HR-5009 White 24[4] | A,F | CLD 23 | PVC | |
Georgia-Gulf HR-5009 White 469[4] | A,F | CLD 23 | PVC | |
Georgia-Gulf LR-5009 Green 83 | F | CLD 23 | PVC | |
Georgia-Gulf LR-5009 White 24[4] | A,F | CLD 23 | PVC | |
Georgia-Gulf MD-5009 Gray 73[4] | A,F | CLD 23 | PVC | |
Georgia-Gulf MD-5009 White 24[4] | A,F | CLD 23 | PVC | |
Georgia-Gulf NR-5009 White 24[4] | A,F | CLD 23 | PVC | |
Georgia-Gulf SP-5034 Gray 02 | F | CLD 23 | PVC | |
Georgia-Gulf SP-5034 Gray 73 | F | CLD 23 | PVC | |
Georgia-Gulf SP-5034 White 24 | F | CLD 23 | PVC | |
Georgia-Gulf SP-7107 Gray 341 | F | CLD 23 | PVC | |
Georgia-Gulf SP-7221 White 24 | A,F | CLD 23 | PVC | |
HL-5009 Gray 73 | A,F | CLD 23 | PVC | |
HL-5009 White 24 | A,F | CLD 23 | PVC | |
HL-5009 White 952[4] | A,F | CLD 23 | PVC | |
HR-5009 Brown 555 (8205302B) | A,F | CLD 23 | PVC | |
LR5009PP WHT 24 L2O | A,F | CLD 23 | PVC | |
Protherm 4303 Gray 165 | P | C. HOT | CPVC | |
Protherm 4303 Orange 25 | P | C. HOT | CPVC | |
Protherm 4303 Tan 01 | p | C. HOT | CPVC | |
Protherm 4303 Tan 351 | P | C. HOT | CPVC | |
Protherm 4345 Gray 165 | P | C. HOT | CPVC | |
Protherm 4345 Tan 01 | P | C. HOT | CPVC | |
Protherm 4353 Gray 165[6] | P | C. HOT | CPVC | |
Protherm 4353 Orange 25[6] | P | C. HOT | CPVC | |
Protherm 4526 Black 11 | F | C. HOT | CPVC | |
Protherm 4526 Gray 165 | F | C. HOT | CPVC | |
Protherm 4526 Tan 01 | F | C. HOT | CPVC | |
Protherm 4526 Tan 351 | F | C. HOT | CPVC | |
Protherm 4529 Black 11 | F | C. HOT | CPVC | |
Protherm 4529 Black 66 | F | C. HOT | CPVC | |
Protherm 4529 Blue 115 | F | C. HOT | CPVC | |
Protherm 4529 Blue 116 | F | C. HOT | CPVC | |
Protherm 4529 Gray 165 | F | C. HOT | CPVC | |
Protherm 4529 Gray 451 | F | C. HOT | CPVC | |
Protherm 4529 Gray 73 | F | C. HOT | CPVC | |
Protherm 4529 Orange 25 | F | C. HOT | CPVC | |
Protherm 4529 Tan 01 | F | C. HOT | CPVC | |
Protherm 4555 Black 11 | F | C. HOT | CPVC | |
[1] Material trade designation may or may not be followed by either an "M" or an "R": M - Milled/chopped pellets R - Round pellets[2] This material has been accepted for mechanical device applications not to exceed 1000 sq. in./4 L.[3] Certified for a maximum surface to volume ratio of 295 sq. in./L.[4] Certified for a maximum surface area to volume ratio of 250 sq. in./L.[5] Certified for a maximum surface area to volume ratio of 81 sq. in./L.[6] Certified for a maximum surface to volume ratio of 500 sq. in./L. |
NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the NSF Mark.NOTE: The trade designation may or may not include "Georgia Gulf".
Facility : Gallman, MS
Potable Water Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | End Use | Temp | Material | |
Potable Water Materials[1] | ||||
3085 White 1575 | P | CLD 23 | PVC | |
4526 Orange 25 | F | C. HOT | CPVC | |
6907 Blue 83[2] | F | CLD 23 | PVC | |
7048A Black 26 | A | CLD 23 | PVC | |
7048A Gray 50[3] | A | CLD 23 | PVC | |
7048A Gray 82[3] | A | CLD 23 | PVC | |
7140 Brown 311 | P | CLD 23 | PVC | |
7140 White 94 | P | CLD 23 | PVC | |
7181 White 66[4] | A | CLD 23 | PVC | |
7434 Black 11 | A, F | CLD 23 | PVC | |
7434 Blue 123 | CLD 23 | PVC | ||
7434 Blue 123 | A, F | CLD 23 | PVC | |
7434 Gray 73 | A,F | CLD 23 | PVC | |
7434 Red 81 | A, F | CLD 23 | PVC | |
7434 Red 82 | A, F | CLD 23 | PVC | |
7434 White 24 | A,F | CLD 23 | PVC | |
7800 Gray 471[3] | A | CLD 23 | PVC | |
7800 Natural 00[3] | A | CLD 23 | PVC | |
9246 Clear 08[5] | A | CLD 23 | PVC | |
9246 Clear 136[5] | A | CLD 23 | PVC | |
9260 Clear 136[5] | A | CLD 23 | PVC | |
GN HD-5009 White 24[3] | A,F | CLD 23 | PVC | |
GN HL-5009 White 24 | A, F | CLD 23 | PVC | |
Georgia Gulf 3152 Natural 00 | P | CLD 23 | PVC | |
Georgia Gulf 5009 Gray 73 | A,F | CLD 23 | PVC | |
Georgia Gulf 7521 White 24 | A,F | CLD 23 | PVC | |
Georgia Gulf 9209 Clear 03[3] | A | CLD 23 | PVC | |
Georgia Gulf DL-5009 Gray 73[3] | A,F | CLD 23 | PVC | |
Georgia Gulf DL-5009 White 24[3] | A,F | CLD 23 | PVC | |
Georgia Gulf HD 5009 White 24[3] | A,F | CLD 23 | PVC | |
Georgia Gulf HR-5009 White 772[3] | A,F | CLD 23 | PVC | |
Georgia Gulf LR-5009 Gray 251 | A,F | CLD 23 | PVC | |
Georgia Gulf LR-5009 Gray 251[3] | A,F | CLD 23 | PVC | |
Georgia-Gulf 3150 White 125 | P | CLD 23 | PVC | |
Georgia-Gulf 3152 Gray 434 | P | CLD 23 | PVC | |
Georgia-Gulf 3152 White 125 | P | CLD 23 | PVC | |
Georgia-Gulf 3401 White 125 | P | CLD 23 | PVC | |
Georgia-Gulf 4345 Orange 25 | P | C. HOT | CPVC | |
Georgia-Gulf 5009 Gray 251[3] | A,F | CLD 23 | PVC | |
Georgia-Gulf 5009 Gray 252[3] | A,F | CLD 23 | PVC | |
Georgia-Gulf 5009 Gray 309[3] | A,F | CLD 23 | PVC | |
Georgia-Gulf 5009 White 24[3] | A,F | CLD 23 | PVC | |
Georgia-Gulf 5034 Gray 02 | F | CLD 23 | PVC | |
Georgia-Gulf 5034 Gray 73 | F | CLD 23 | PVC | |
Georgia-Gulf 5034 White 24 | F | CLD 23 | PVC | |
Georgia-Gulf 6320 White 24 | F | CLD 23 | PVC | |
Georgia-Gulf 6380 Clear 01 | F | CLD 23 | PVC | |
Georgia-Gulf 6380J Clear 01 | F | CLD 23 | PVC | |
Georgia-Gulf 7107 Gray 341 | F | CLD 23 | PVC | |
Georgia-Gulf 7221 Gray 02 | A,F | CLD 23 | PVC | |
Georgia-Gulf 7221 Gray 252 | A,F | CLD 23 | PVC | |
Georgia-Gulf 7221 Gray 350 | A,F | CLD 23 | PVC | |
Georgia-Gulf 7221 White 24 | A,F | CLD 23 | PVC | |
Georgia-Gulf CL-6380 Clear 01 | F | CLD 23 | PVC | |
Georgia-Gulf CL-6380J Clear 01 | F | CLD 23 | PVC | |
Georgia-Gulf HR-5009 Black 11[3] | A,F | CLD 23 | PVC | |
Georgia-Gulf HR-5009 Gray 73[3] | A,F | CLD 23 | PVC | |
Georgia-Gulf HR-5009 Green 83 | A,F | CLD 23 | PVC | |
Georgia-Gulf HR-5009 White 24[3] | A,F | CLD 23 | PVC | |
Georgia-Gulf HR-5009 White 469[3] | A,F | CLD 23 | PVC | |
Georgia-Gulf LR-5009 White 24[3] | A,F | CLD 23 | PVC | |
Georgia-Gulf MD-5009 Gray 73[3] | A,F | CLD 23 | PVC | |
Georgia-Gulf MD-5009 White 24[3] | A,F | CLD 23 | PVC | |
Georgia-Gulf NR-5009 White 24[3] | A,F | CLD 23 | PVC | |
Georgia-Gulf SP-5034 Gray 02 | F | CLD 23 | PVC | |
Georgia-Gulf SP-5034 Gray 73 | F | CLD 23 | PVC | |
Georgia-Gulf SP-5034 White 24 | F | CLD 23 | PVC | |
Georgia-Gulf SP-7107 Gray 341 | F | CLD 23 | PVC | |
Georgia-Gulf SP-7221 White 24 | A,F | CLD 23 | PVC | |
HL-5009 Gray 73 | A,F | CLD 23 | PVC | |
HL-5009 White 24 | A,F | CLD 23 | PVC | |
HL-5009 White 952[3] | A,F | CLD 23 | PVC | |
HR-5009 Brown 555 (8205302B) | A,F | CLD 23 | PVC | |
LR5009PP WHT 24 L2O | A,F | CLD 23 | PVC | |
Protherm 4303 Gray 165 | P | C. HOT | CPVC | |
Protherm 4303 Orange 25 | P | C. HOT | CPVC | |
Protherm 4303 Tan 01 | P | C. HOT | CPVC | |
Protherm 4303 Tan 351 | P | C. HOT | CPVC | |
Protherm 4345 Gray 165 | P | C. HOT | CPVC | |
Protherm 4345 Tan 01 | P | C. HOT | CPVC | |
Protherm 4353 Gray 165[6] | P | C. HOT | CPVC | |
Protherm 4353 Orange 25[6] | P | C. HOT | CPVC | |
Protherm 4526 Black 11 | F | C. HOT | CPVC | |
Protherm 4526 Gray 165 | F | C. HOT | CPVC | |
Protherm 4526 Tan 01 | F | C. HOT | CPVC | |
Protherm 4526 Tan 351 | F | C. HOT | CPVC | |
Protherm 4529 Black 11 | F | C. HOT | CPVC | |
Protherm 4529 Black 66 | F | C. HOT | CPVC | |
Protherm 4529 Blue 115 | F | C. HOT | CPVC | |
Protherm 4529 Blue 116 | F | C. HOT | CPVC | |
Protherm 4529 Gray 165 | F | C. HOT | CPVC | |
Protherm 4529 Gray 451 | F | C. HOT | CPVC | |
Protherm 4529 Gray 73 | F | C. HOT | CPVC | |
Protherm 4529 Orange 25 | F | C. HOT | CPVC | |
Protherm 4529 Tan 01 | F | C. HOT | CPVC | |
Protherm 4555 Black 11 | F | C. HOT | CPVC | |
[1] Material trade designation may or may not be followed by either an "M" or an "R": M - Milled/chopped pellets R - Round pellets[2] Certified for a maximum surface to volume ratio of 295 sq. in./L.[3] Certified for a maximum surface area to volume ratio of 250 sq. in./L.[4] This material has been accepted for mechanical device applications not to exceed 1000 sq. in./4 L.[5] Certified for a maximum surface area to volume ratio of 81 sq. in./L.[6] Certified for a maximum surface to volume ratio of 500 sq. in./L. |
NOTE: The trade designation may or may not include "Georgia Gulf".NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the NSF Mark.
Facility : Madison, MS
Potable Water Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | End Use | Temp | Material | |
Potable Water Materials[1] | ||||
24880 Black[2] | A | CLD 23 | FPVC | |
24880 NATURAL[2] | A | CLD 23 | FPVC | |
[1] Material trade designation may or may not be followed by either an "M" or an "R": M - Milled/chopped pellets R - Round pellets[2] Certified for a maximum surface area to volulme ratio of 80 sq. in./L. |
NOTE: The trade designation may or may not include "Georgia Gulf".NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the NSF Mark.
Westlake Corporation DBA Westlake Chemicals & Vinyls LLC (Formerly Axiall, LLC) | |
(formerly PPG Industries) | |
11 Stanwix Street | |
Suite 1900 | |
Pittsburgh, PA 15222 | |
United States | |
800-245-2974 | |
412-515-8098 | |
Visit this company's website |
Facility : Burgettstown, PA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Chemical Feeders[1] | ||||
Accu-Tab® Model 2300 Chlorinator[2] | N/A | CLD 23 | MLTPL | |
Accu-Tab® Model 2600 Chlorinator[2] | N/A | CLD 23 | MLTPL | |
Accu-Tab® Model 30600 Chlorinator[2] | N/A | CLD 23 | MLTPL | |
Accu-Tab® Model 3012 Chlorinator[3] | N/A | CLD 23 | MLTPL | |
Accu-Tab® Model 3075 Chlorinator[2] | N/A | CLD 23 | MLTPL | |
Accu-Tab® Model 3150 Chlorinator[2] | N/A | CLD 23 | MLTPL | |
Accu-Tab® Model 3530 Chlorinator[2] | N/A | CLD 23 | MLTPL | |
Accu-Tab® Model 3550 Chlorinator[2] | N/A | CLD 23 | MLTPL | |
[1] Certification of this product has been performed to the health effects requirements of NSF/ANSI/CAN 61, which assesses the acceptability of potential extractants from the chemical feeder when used with the manufacturer's recommended use chemicals. Any modifications including the use of chemicals other than those recommended by the manufacturer and chemicals that are not compliant to NSF/ANSI/CAN 60 will void the NSF Certification for this feeder.[2] Certified for a minimum daily flow of 21,800 L.[3] Product was evaluated and Certified based upon dosing of water at 5ppm chlorine residual. Certified for a minimum daily flow of 27,000 L per day. |
Facility : Rock Hill, SC
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Chemical Feeders[1][2] | ||||
Accu-Tab 2075 P | [3] | CLD 23 | MLTPL | |
Accu-Tab 2150 P | [3] | CLD 23 | MLTPL | |
[1] Certification of this product has been performed to the health effects requirements of NSF/ANSI/CAN 61, which assesses the acceptability of potential extractants from the chemical feeder when used with the manufacturer's recommended use chemicals. Any modifications including the use of chemicals other than those recommended by the manufacturer and chemicals that are not compliant to NSF/ANSI/CAN 60 will void the NSF Certification for this feeder.[2] The product is evaluated and Certified based on dosing water at 10 ppm residual chlorine.[3] Certified for a minimum flow of 21,800 L/day. |
Westlake Pipe & Fittings Corporation | |
The Westlake Center | |
2801 Post Oak Boulevard, Suite 650 | |
Houston, TX 77056 | |
United States | |
800-999-7473 | |
713-585-2621 |
Facility : Yucca, AZ
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe Only[1][G] | ||||
Westlake Pipe & Fittings | >= 1/2" | CLD 23 | PVC | |
[1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings or AquaSpring®.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Pipe[G] | ||||
Certa-Lok® | >= 1/2" | CLD 23 | PVC | |
Certa-Lok® C900/RJ | >= 4" | CLD 23 | PVC | |
Sure-Fit™ | >= 1/2" | CLD 23 | PVC | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product,product packaging, and/or documentation shipped with the product are Certified.
Facility : Lodi, CA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe[1][G] | ||||
AquaSpring Certa Lok® C900/RJ | >= 4" | CLD 23 | MLTPL | |
AquaSpring Certa-Lok® RJIB Pipe with Fluid-Tite™ Gasket | 6" - 16" | CLD 23 | MLTPL | |
AquaSpring Westlake Pipe & Fittings | >= 1/2" | CLD 23 | MLTPL | |
AquaSpring [Certa-Lok Logo] C900/RJIB | >= 4" | CLD 23 | MLTPL | |
Certa-Lok® Drop Pipe | >= 1/2" | CLD 23 | MLTPL | |
Certa-Lok® Yelomine™ IB | >= 4" | CLD 23 | MLTPL | |
KWIK-SET® | >= 1" | CLD 23 | MLTPL | |
Westlake Pipe & Fittings | >= 1/2" | CLD 23 | MLTPL | |
[1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Well Casing[2][G] | ||||
Certa-Lok® CLIC IB Well Casing | >= 4" | CLD 23 | MLTPL | |
Certa-Lok® IB Well Casing | >= 4" | CLD 23 | MLTPL | |
Certa-Lok® Well Casing | >= 2" | CLD 23 | MLTPL | |
Sure-Fit™ Well Casing | >= 2" | CLD 23 | MLTPL | |
[2] Certa-Lok® IB Well Casing, Sure-Fit™ Well Casing, and Certa-Lok® Well Casing have been specifically evaluated for well casing applications and have not been evaluated for the effects of field slotting, and Capping.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product,product packaging, and/or documentation shipped with the product are Certified.
Facility : Greensboro, GA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe Only[1][G] | ||||
Certa-Lok® C900/RJ* | >= 4" | CLD 23 | PVC | |
Westlake Pipe & Fittings | >= 1/2" | CLD 23 | PVC | |
* Product not evaluated to AWWA C900 by NSF International.[1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings or AquaSpring®.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product,product packaging, and/or documentation shipped with the product are Certified.
Facility : McPerson, KS
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[G] | ||||
Certa-Lok® C900/RJ[3] | >= 2" | CLD 23 | MLTPL | |
Certa-Lok® Composite Couplings | >= 14" | CLD 23 | MLTPL | |
Certa-Lok® Drop Couplings | >= 2" | CLD 23 | MLTPL | |
Certa-Lok® Yelomine™ Couplings | >= 2" | CLD 23 | MLTPL | |
Certa-Lok® Yelomine™ Couplings | >= 14" | CLD 23 | MLTPL | |
Certa-Set® Couplings | >= 2" | CLD 23 | MLTPL | |
Westlake Pipe & Fittings Fluid-Tite™ | >= 1/2" | CLD 23 | MLTPL | |
Westlake Pipe & Fittings Fluid-Tite™ Couplings | >= 1 1/2" | CLD 23 | MLTPL | |
[3] Product not evaluated to AWWA C900 by NSF International.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Pipe[G] | ||||
AquaSpring® | >= 1/2" | CLD 23 | MLTPL | |
Certa Lok® C900/RJ[3] | >= 4" | CLD 23 | MLTPL | |
Certa Lok® C900/RJIB[3] | >= 4" | CLD 23 | MLTPL | |
Certa Lok® Yelomine™ | >= 2" | CLD 23 | MLTPL | |
Certa Lok® Yelomine™ IB | >= 4" | CLD 23 | MLTPL | |
Certa-Lok® Drop Pipe | >= 1/2" | CLD 23 | MLTPL | |
Certa-Set® | >= 2" | CLD 23 | MLTPL | |
KWIK-SET® | >= 1" | CLD 23 | MLTPL | |
[3] Product not evaluated to AWWA C900 by NSF International.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Pipe Only[1][G] | ||||
Westlake Pipe & Fittings | >= 1/2" | CLD 23 | MLTPL | |
[1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Well Casing[2][G] | ||||
Certa-Lok® CLIC IB Well Casing | >= 4" | CLD 23 | MLTPL | |
Certa-Lok® IB Well Casing | >= 4" | CLD 23 | MLTPL | |
Certa-Lok® Well Casing | >= 2" | CLD 23 | MLTPL | |
SureFit™ Well Casing | >= 2" | CLD 23 | MLTPL | |
[2] Certa-Lok® Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for well casing applications and have not been evaluated for the effects of field slotting, and capping.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product,product packaging, and/or documentation shipped with the product are Certified.
Facility : Shelby Township, MI
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings*[G] | ||||
D604 Stop Coupling | 4" | CLD 23 | PVC | |
D606 Stop Coupling | 6" | CLD 23 | PVC | |
D608 Stop Coupling | 8" | CLD 23 | PVC | |
D1604 Cap | 4" | CLD 23 | PVC | |
D1604.500 End Cap | 4 1/2" | CLD 23 | PVC | |
D1606 Cap | 6" | CLD 23 | PVC | |
D1606.250 End Cap | 6 1/4" | CLD 23 | PVC | |
D1608 Cap | 8" | CLD 23 | PVC | |
D6010 Stop Coupling | 10" | CLD 23 | PVC | |
D6012 Stop Coupling | 12" | CLD 23 | PVC | |
D16010 Cap | 10" | CLD 23 | PVC | |
D16012 Cap | 12" | CLD 23 | PVC | |
NAPCO Yelomine™ | 3" | CLD 23 | MLTPL | |
NAPCO Yelomine™ Certa-Lok® | 2" - 4" | CLD 23 | MLTPL | |
Tapped Tee 6"X6" CIOD IB | 3/4" - 2" | CLD 23 | PVC | |
Tapped Tee 8"X8" CIOD IB | 3/4" - 2" | CLD 23 | PVC | |
* Trade names can be represented by PTI, PTI-Logo, Plastic Trend Inc, Royal Pipe Systems, or NAPCO.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Booneville, MS
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe Only[1][G] | ||||
Westlake Pipe & Fittings | >= 1/2" | CLD 23 | PVC | |
[1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings or AquaSpring®.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product,product packaging, and/or documentation shipped with the product are Certified.
Facility : Leola, PA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe Only[1][G] | ||||
Westlake Pipe & Fittings | >= 1/2" | CLD 23 | PVC | |
[1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings or AquaSpring®.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Facility : Brownsville, TN
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1][2][G] | ||||
45 Degree Ell SP x Slip (C623-XXX) | 10" - 12" | C. HOT | CPVC | |
45 Street Ell SP x Slip (C623-XXX) | 10" - 12" | C. HOT | CPVC | |
854-XXX Slip – Vanstone flange | 2" - 2 1/2" | CLD 23 | PVC | |
90 Degree Street Ell SP x Slip (C609-XXX) | 10" - 12" | C. HOT | CPVC | |
Blind Flange (853-XXX) | 1/2" - 8" | C. HOT | CPVC | |
LASCO 22 1/2° Elbow (S x S)(465-XXX) | 1" - 12" | CLD 23 | PVC | |
LASCO 45° Ell (S x S)(C617-100) | 10" - 12" | CLD 23 | PVC | |
LASCO 90° Ell (S x S)(C606-XXX) | 10" - 12" | CLD 23 | PVC | |
LASCO 90° SWEEP ELBOW (406-XXX-SW) | 1" - 6" | CLD 23 | PVC | |
LASCO 90° SWEEP ELBOW (409-XXX-SW) | 1" - 6" | CLD 23 | PVC | |
LASCO BH TEE (S X S X SPG) (B1171-00) | 1" x 1" x 1-1/2" | CLD 23 | PVC | |
LASCO Blind Flange (9853-XXX) | 1 1/2" - 8" | C. HOT | CPVC | |
LASCO Bushing (SP x S) (C637-XXX) | 12" x 3" | CLD 23 | PVC | |
LASCO Bushing (SP x S) (C637-XXX) | 10" x 3" | CLD 23 | PVC | |
LASCO Bushing (SP x S) (C637-XXX) | 12" x 6" | CLD 23 | PVC | |
LASCO Bushing (SP x S) (C637-XXX) | 10" x 4" | CLD 23 | PVC | |
LASCO Bushing (SP x S) (C637-XXX) | 12" x 4" | CLD 23 | PVC | |
LASCO Bushing (SP x S)(C637-XXX) | 10" x 6" | CLD 23 | PVC | |
LASCO Bushing (SP x S)(C637-XXX) | 10" x 8" | CLD 23 | PVC | |
LASCO Bushing (SP x S)(C637-XXX) | 12" x 10" | CLD 23 | PVC | |
LASCO Bushing (SP x S)(C637-XXX) | 12" x 8" | CLD 23 | PVC | |
LASCO CPVC REDUCER WYE SLIP x SLIP x SLIP (9875-XXX) | 2" x 1 1/4" | C. HOT | CPVC | |
LASCO CPVC REDUCER WYE SLIP x SLIP x SLIP (9875-XXX) | 2" x 1/2" | C. HOT | CPVC | |
LASCO CPVC REDUCER WYE SLIP x SLIP x SLIP (9875-XXX) | 2" x 3/4" | C. HOT | CPVC | |
LASCO CPVC REDUCER WYE SLIP x SLIP x SLIP (9875-XXX) | 2" x 1" | C. HOT | CPVC | |
LASCO CPVC REDUCER WYE SLIP x SLIP x SLIP (9875-XXX) | 2" x 1 1/2" | C. HOT | CPVC | |
LASCO Cap (C647-XXX) | 10" - 12" | CLD 23 | PVC | |
LASCO Comp Flange S (851-XXX) | 1/2" - 6" | CLD 23 | PVC | |
LASCO Comp Flange T (852-XXX) | 1/2" - 4" | CLD 23 | PVC | |
LASCO Comp Flange T (9852-XXX) | 1/2" - 4" | C. HOT | CPVC | |
LASCO Coupling (S x S)(C629-XXX) | 10" - 12" | CLD 23 | PVC | |
LASCO Fiber Tuff Flange-Slip (854-XXXFT) | 3" - 12" | CLD 23 | PVC | |
LASCO Flange S (9851-XXX) | 1/2" - 6" | C. HOT | CPVC | |
LASCO Reducer Coupling (S x S) (C629-XXX) | 10" x 8" | CLD 23 | PVC | |
LASCO Reducer Coupling (S x S)(C629-XXX) | 12" x 8" | CLD 23 | PVC | |
LASCO Reducer Coupling (S x S)(C629-XXX) | 10" x 6" | CLD 23 | PVC | |
LASCO Reducer Coupling (S x S)(C629-XXX) | 12" x 10" | CLD 23 | PVC | |
LASCO Sch 40 Wye S (475-XXX) | 8" X 8" X 4" | CLD 23 | PVC | |
LASCO Sch 40 Wye S (475-XXX) | 1 1/2" - 8" | CLD 23 | PVC | |
LASCO Sch 40 Wye S (475-XXX) | 6" X 6" X 4" | CLD 23 | PVC | |
LASCO Sch 80 Wye S (875-XXX) | 3" | CLD 23 | PVC | |
LASCO Sch 80 Wye S (9875-XXX) | 2" | C. HOT | CPVC | |
LASCO Schedule 80 Wye S (875-XXX) | 8" x 8" x 4" | CLD 23 | PVC | |
LASCO Schedule 80 Wye S (875-XXX) | 8" x 8" x 3" | CLD 23 | PVC | |
LASCO Schedule 80 Wye S (875-XXX) | 8" x 8" x 2" | CLD 23 | PVC | |
LASCO Schedule 80 Wye S (875-XXX) | 6" x 6" x 4" | CLD 23 | PVC | |
LASCO Schedule 80 Wye S (875-XXX) | 6" x 6" x 3" | CLD 23 | PVC | |
LASCO Schedule 80 Wye S (875-XXX) | 6" x 6" x 2" | CLD 23 | PVC | |
LASCO Schedule 80 Wye S (875-XXX) | 4" x 4" x 3" | CLD 23 | PVC | |
LASCO Schedule 80 Wye S (875-XXX) | 4" x 4" x 2" | CLD 23 | PVC | |
LASCO Schedule 80 Wye S (875-XXX) | 3" x 3" x 2 1/2" | CLD 23 | PVC | |
LASCO Schedule 80 Wye S (875-XXX) | 3" x 3" x 2" | CLD 23 | PVC | |
LASCO Schedule 80 Wye S (875-XXX) | 3" x 3" x 1 1/2" | CLD 23 | PVC | |
LASCO Schedule 80 Wye S (875-XXX) | 3" x 3" x 1 1/4" | CLD 23 | PVC | |
LASCO Schedule 80 Wye S (875-XXX) | 3" x 3" x 1" | CLD 23 | PVC | |
LASCO Schedule 80 Wye S (875-XXX) | 2" x 2" x 1 1/2" | CLD 23 | PVC | |
LASCO Schedule 80 Wye S (875-XXX) | 2" x 2" x 1 1/4" | CLD 23 | PVC | |
LASCO Schedule 80 Wye S (875-XXX) | 2" x 2" x 1" | CLD 23 | PVC | |
LASCO Schedule 80 Wye S (875-XXX) | 2" x 2 3/4" | CLD 23 | PVC | |
LASCO Schedule 80 Wye S (875-XXX) | 2" x 2 1/2" | CLD 23 | PVC | |
LASCO Schedule 80 Wye S (875-XXX) | 2" - 8" | CLD 23 | PVC | |
LASCO Schedule 80 Wye S (875-XXX) | 8" x 8" x 6" | CLD 23 | PVC | |
LASCO Surge Guard Elbow 45 Deg (370-020) | 2" | CLD 23 | PVC | |
LASCO Surge Guard Elbow 90 Deg (306-249) | 2" x 1" | CLD 23 | PVC | |
LASCO Surge Guard Elbow 90 Deg (306-250) | 2" x 1 1/4" | CLD 23 | PVC | |
LASCO Surge Guard Elbow 90 Deg (306-251) | 2" x 1 1/2" | CLD 23 | PVC | |
LASCO Surge Guard Elbow 90 Deg (306-XXX) | 2" - 2 1/2" | CLD 23 | PVC | |
LASCO Surge Guard Tees (301-249) | 2" x 1" | CLD 23 | PVC | |
LASCO Surge Guard Tees (301-250) | 2" x 1 1/4" | CLD 23 | PVC | |
LASCO Surge Guard Tees (301-251) | 2" x 1 1/2" | CLD 23 | PVC | |
LASCO Surge Guard Tees (301-XXX) | 2" - 2 1/2" | CLD 23 | PVC | |
LASCO Surge Guard® Elbow 22.5 DEG (365-025) | 2 1/2" | CLD 23 | PVC | |
LASCO Surge Guard® Elbow 45 DEG (317-XXX) | 2" x 2 1/2" | CLD 23 | PVC | |
LASCO Surge Guard® Elbow 90 DEG (306-025) | 2 1/2" | CLD 23 | PVC | |
LASCO Surge Guard® Tees (301-025) | 2 1/2" | CLD 23 | PVC | |
LASCO Tee (S x S x S)(C601-XXX) | 10" - 12" | CLD 23 | PVC | |
LASCO VANSTONE FLANGE (9854-XXX) | 1/2" - 2 1/2" | C. HOT | CPVC | |
LASCO VANSTONE FLANGE (9854-XXXFT) | 3" - 12" | C. HOT | CPVC | |
LASCO VANSTONE FLANGE SPG (9856-XXX) | 1" - 2 1/2" | C. HOT | CPVC | |
LASCO VANSTONE FLANGE SPG (9856-XXXFT) | 3" - 8" | C. HOT | CPVC | |
LASCO Venturi Tee (473-210) | 1-1/2” x 3/4" | CLD 23 | PVC | |
LASCO Venturi Tee (473-825) | 3/4" x 1" x 3/4" | CLD 23 | PVC | |
LASCO WYE S (B1640-00) | 1" | CLD 23 | PVC | |
Lasco Threaded white Union Sch 40 (458-XXX) | 1/2" - 4" | CLD 23 | PVC | |
Loose Ring Flange Spigot Style (856-XXX) | 1/2" - 2 1/2" | C. HOT | CPVC | |
Loose Ring Flange Spigot Style (856-XXXFT) | 3" - 12" | C. HOT | CPVC | |
Reducer Tee Class 125 (C601-XXX) | 12" x 12" x 10" | CLD 23 | PVC | |
Reducer Tee Class 125 (C601-XXX) | 12" x 12" x 8" | CLD 23 | PVC | |
Reducer Tee Class 125 (C601-XXX) | 12" x 12" x 6" | CLD 23 | PVC | |
Reducer Tee Class 125 (C601-XXX) | 12" x 12" x 4" | CLD 23 | PVC | |
Reducer Tee Class 125 (C601-XXX) | 10" x 10" x 8" | CLD 23 | PVC | |
Reducer Tee Class 125 (C601-XXX) | 10" x 10" x 6" | CLD 23 | PVC | |
Reducer Tee Class 125 (C601-XXX) | 10" x 10" x 4" | CLD 23 | PVC | |
Slip x MIPT (896-XXX) | 1/2" - 3" | C. HOT | CPVC | |
Slip x MIPT Reducer (896-XXX) | 1 1/4" x 1" | C. HOT | CPVC | |
[1] XXX designates the following sizes: 002 – 1/4" 003 – 3/8" 005 – 1/2" 007 – 3/4" 010 – 1" 012 - 1 1/4" 015 – 1 1/2" 020 – 2" 025 – 2 1/2" 030 – 3" 040 – 4" 052 – 3/8" x 1/4" 060 – 6" 072 – 1/2" x 1/4" 073 – 1/2" x 3/8" 080 – 8" 100 - 10" 120 - 12" 094 - 3/4" x 1/2" x 1/2" 101 – 3/4" x 1/2" 130 – 1" x 1/2" 131 – 1" x 3/4" 166 – 1 1/4" x 1/2" 167 – 1 1/4" x 3/4" 168 – 1 1/4" x 1" 209 – 1 1/2" x 1/2" 210 – 1 1/2" x 3/4" 211 – 1 1/2" x 1" 212 - 1 1/2" x 1 1/4" 247 – 2" x 1/2" 248 – 2" x 3/4" 249 – 2" x 1" 250 – 2" x 1 1/4" 251 – 2" x 1 1/2" 289 – 2 1/2" x 1" 291 – 2 1/2" x 1 1/2" 292 – 2 1/2" x 2" 334 – 3" x 3" x 3/4" 337 – 3" x 1 1/2" 335 – 3" x 3" x 1" 338 – 3" x 2" 339 – 3" x 2 1/2" 420 – 4" x 2" 421 – 4" x 2 1/2" 422 – 4" x 3" 532 – 6" x 4" 530 - 6" X 6" x 3" 585 – 8" x 6"[2] Product may also be marked with the trade designation Westlake Pipe & Fittings.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Wichita Falls, TX
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe Only[1][G] | ||||
Certa-Lok® C900/RJ | >= 4" | CLD 23 | PVC | |
Westlake Pipe & Fittings | >= 1/2" | CLD 23 | PVC | |
[1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Facility : Janesville, WI
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe Only[1][G] | ||||
Certa-Lok® C900/RJ | >= 4" | CLD 23 | PVC | |
Westlake Pipe & Fittings | >= 1/2" | CLD 23 | PVC | |
AquaSpring® | >= 1/2" | CLD 23 | PVC | |
[1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings or AquaSpring®.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Whipps, Inc. | |
370 South Athol Road | |
Athol, MA 01331 | |
United States | |
978-249-7924 | |
Visit this company's website |
Facility : Athol, MA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Miscellaneous Treatment Devices/Components | ||||
Series 529 Stop Logs | CLD 23 | MLTPL | ||
Series 900 Slide Gates[1] | 4" - 180" | CLD 23 | MLTPL | |
Series 900 Sluice Gates[1] | 4" - 180" | CLD 23 | MLTPL | |
[1] Certified for a minimum daily flow of 10,000 liters. |
Wika Instrument LP | |
1000 Wiegand Boulevard | |
Lawrenceville, GA 30043 | |
United States | |
888-WIKA-USA | |
678-739-2608 |
Facility : Lawrenceville, GA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pressure Gauges[G] | ||||
WIKA Model 111.10DW 1.5" LM | N/A | D. HOT | MLTPL | |
WIKA Model 111.10DW 1.5" LM | N/A | CLD 23 | MLTPL | |
WIKA Model 111.10DW 2" LM | N/A | CLD 23 | MLTPL | |
WIKA Model 111.10DW 2.0" LM | N/A | D. HOT | MLTPL | |
WIKA Model 111.10DW 2.5" LM | N/A | D. HOT | MLTPL | |
WIKA Model 111.10DW 2.5" LM | N/A | D. HOT | MLTPL | |
WIKA Model 111.10DW 2.5" LM | N/A | CLD 23 | MLTPL | |
WIKA Model 111.10DW 4" LM | N/A | CLD 23 | MLTPL | |
WIKA Model 111.12DW 1.5" CBM | N/A | CLD 23 | MLTPL | |
WIKA Model 111.12DW 1.5" CBM | N/A | D. HOT | MLTPL | |
WIKA Model 111.12DW 2" CBM | N/A | D. HOT | MLTPL | |
WIKA Model 111.12DW 2" CBM | N/A | CLD 23 | MLTPL | |
WIKA Model 111.12DW 2.5" CBM | N/A | CLD 23 | MLTPL | |
WIKA Model 111.12DW 2.5'' CBM | N/A | D. HOT | MLTPL | |
WIKA Model 111.12DW 4" CBM | N/A | CLD 23 | MLTPL | |
WIKA Model 111.16DW.063 2.5" CBM | N/A | D. HOT | MLTPL | |
WIKA Model 111.16DW.063 2.5" CBM | N/A | CLD 23 | MLTPL | |
WIKA Model 111.25DW 4.5" LM | N/A | D. HOT | MLTPL | |
WIKA Model 111.25DW 4.5" LM | N/A | CLD 23 | MLTPL | |
WIKA Model 113.13DW 1.5" CBM | N/A | D. HOT | MLTPL | |
WIKA Model 113.13DW 1.5" CBM | N/A | CLD 23 | MLTPL | |
WIKA Model 113.13DW 2" CBM | N/A | CLD 23 | MLTPL | |
WIKA Model 113.13DW 2" CBM | N/A | D. HOT | MLTPL | |
WIKA Model 113.13DW 2.5" CBM | N/A | D. HOT | MLTPL | |
WIKA Model 113.13DW 2.5" CBM | N/A | CLD 23 | MLTPL | |
WIKA Model 212.53DW 2" CBM | N/A | CLD 23 | MLTPL | |
WIKA Model 212.53DW 2" CBM | N/A | D. HOT | MLTPL | |
WIKA Model 212.53DW 2.5" CBM | N/A | D. HOT | MLTPL | |
WIKA Model 212.53DW 2.5" CBM | N/A | CLD 23 | MLTPL | |
WIKA Model 212.53DW 2.5" LM | N/A | D. HOT | MLTPL | |
WIKA Model 212.53DW 2.5" LM | N/A | CLD 23 | MLTPL | |
WIKA Model 213.53DW 2" CBM | N/A | D. HOT | MLTPL | |
WIKA Model 213.53DW 2" CBM | N/A | CLD 23 | MLTPL | |
WIKA Model 213.53DW 2.5" CBM | N/A | D. HOT | MLTPL | |
WIKA Model 213.53DW 2.5" CBM | N/A | CLD 23 | MLTPL | |
WIKA Model 213.53DW 2.5" LM | N/A | CLD 23 | MLTPL | |
WIKA Model 213.53DW 2.5" LM | N/A | D. HOT | MLTPL | |
WIKA Model 21X.53DW 2" LM | N/A | CLD 23 | MLTPL | |
Wika Model 111.10DW 4" LM | N/A | D. HOT | MLTPL | |
Wika Model 111.12DW 4" CBM | N/A | D. HOT | MLTPL | |
Wika Model 21X.53DW 2" LM | N/A | D. HOT | MLTPL | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
William H. Harvey Company | |
4334 South 67th Street | |
Omaha, NE 68117 | |
United States | |
800-228-9681 | |
402-331-1175 |
Facility : Omaha, NE
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Brazing/Solders/Fluxes | ||||
Cebtrak Goulet Solder Paste | >= 1/2" | C. HOT | FLX | |
Coburn's Solder Paste | >= 1/2" | C. HOT | FLX | |
Do It Best Solder Paste | >= 1/2" | C. HOT | FLX | |
Do It Solder Paste | >= 1/2" | C. HOT | FLX | |
Durst Solder Paste | >= 1/2" | C. HOT | FLX | |
Gorman Solder Paste | >= 1/2" | C. HOT | FLX | |
Hajoca Solder Paste | >= 1/2" | C. HOT | FLX | |
Harveys Lead Free Solder Paste | >= 1/2" | C. HOT | FLX | |
Harveys Liquid Solder Flux | >= 1/2" | C. HOT | FLX | |
McDonald Supply Solder Paste | >= 1/2" | C. HOT | FLX | |
Morrison Supply Solder Paste | >= 1/2" | C. HOT | FLX | |
Northeastern Solder Paste | >= 1/2" | C. HOT | FLX | |
Plumb Supply Solder Paste | >= 1/2" | C. HOT | FLX | |
Plumber's Choice Solder Paste | >= 1/2" | C. HOT | FLX | |
Pro Plus Solder Paste | >= 1/2" | C. HOT | FLX | |
ProFlo Solder Paste | >= 1/2" | C. HOT | FLX | |
Proven Solder Paste | >= 1/2" | C. HOT | FLX | |
Sutherlands Solder Paste | >= 1/2" | C. HOT | FLX | |
Winnelson Solder Paste | >= 1/2" | C. HOT | FLX | |
Lubricants | ||||
Bruce Supply Pipe Lube | >= 1/2" | CLD 23 | LUB | |
Builders Pipe Joint Lubricant | >= 1/2" | CLD 23 | LUB | |
Coburn's Pipe Lube | >= 1/2" | CLD 23 | LUB | |
Columbia Pipe Joint Lubricant | >= 1/2" | CLD 23 | LUB | |
FNW Pipe Joint Lubricant | >= 1/2" | CLD 23 | LUB | |
Familian Waterworks Pipe Lube | >= 1/2" | CLD 23 | LUB | |
Foley Products Company First Choice Pipe Joint Lubricant | >= 1/2" | CLD 23 | LUB | |
Plumbest Pipe Lube | >= 1/2" | CLD 23 | LUB | |
RIM Supply Pipe Lube | >= 1/2" | CLD 23 | LUB | |
Trade Select Pipe Lube | >= 1/2" | CLD 23 | LUB | |
Water Pro Pipe Joint Lubricant | >= 1/2" | CLD 23 | LUB | |
William H. Harvey Co. Pipe Joint Lubricant | >= 1/2" | CLD 23 | LUB | |
Winnelson Pipe Lube | >= 1/2" | CLD 23 | LUB | |
Sealants | ||||
ACO Pipe Thread Compound | >= 1/2" | C. HOT | EPOXY | |
ACO TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Ace Pipe Thread Compound | >= 1/2" | C. HOT | EPOXY | |
Ace TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Ay McDonald TFE Paste | >= 1/2" | C. HOT | EPOXY | |
BEI Pipe Joint Compound | >= 1/2" | C. HOT | EPOXY | |
Bruce Supply TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Central Goulet TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Chicago Speciality Pipe Thread Compound | >= 1/2" | C. HOT | EPOXY | |
Chicago Specialty TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Coburn TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Conner TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Do It Best TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Do It Blue Thread Sealant | >= 1/2" | C. HOT | SLT | |
Do It Pipe Thread Compound | >= 1/2" | C. HOT | SLT | |
Do It TFE Paste | >= 1/2" | C. HOT | SLT | |
Do it Best Blue Seal Thread Sealant | >= 1/2" | C. HOT | SLT | |
Do it Best Pipe Thread Compound | >= 1/2" | C. HOT | EPOXY | |
Durst Pipe Thread Compound | >= 1/2" | C. HOT | EPOXY | |
Durst TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Easter TFE Paste | >= 1/2" | C. HOT | EPOXY | |
FNW TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Gorman TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Hajoca TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Harveys Pipe Thread Compound | >= 1/2" | C. HOT | EPOXY | |
Harveys TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Home Base Pipe Thread Compound | >= 1/2" | C. HOT | EPOXY | |
Home Base TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Illustrated TFE Paste | >= 1/2" | C. HOT | EPOXY | |
KF Pipe Thread Compound | >= 1/2" | C. HOT | EPOXY | |
LDR Pipe Thread Compound | >= 1/2" | C. HOT | EPOXY | |
LDR TFE Paste | >= 1/2" | C. HOT | EPOXY | |
LH Pipe Joint Compound | >= 1/2" | C. HOT | EPOXY | |
Lasco Pipe Thread Compound | >= 1/2" | C. HOT | EPOXY | |
Lasco TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Lincoln Products Pipe Tread Compound | >= 1/2" | C. HOT | EPOXY | |
Lincoln Products TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Maintenance Warehouse TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Marvins Pipe Thread Compound | >= 1/2" | C. HOT | EPOXY | |
Marvins TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Master Plumber Pipe Thread Compound | >= 1/2" | C. HOT | EPOXY | |
Master Plumber TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Melard Pipe Thread Compound | >= 1/2" | C. HOT | EPOXY | |
Moen Pipe Joint Compound | >= 1/2" | C. HOT | EPOXY | |
Moen Pipe Thread Compound | >= 1/2" | C. HOT | EPOXY | |
Morrison TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Mountain Country TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Northeastern TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Payless Cashways Pipe Thread Compound | >= 1/2" | C. HOT | EPOXY | |
Payless Cashways TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Plumb Craft Pipe Thread Compound | >= 1/2" | C. HOT | EPOXY | |
Plumb King Pipe Thread Compound | >= 1/2" | C. HOT | EPOXY | |
Plumb Shop TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Plumb Shop Thread Compound | >= 1/2" | C. HOT | EPOXY | |
Plumb Supply TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Plumbers Brand Pipe Thread Compound | >= 1/2" | C. HOT | EPOXY | |
Plumbers Brand TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Premier Pipe Joint Compound | >= 1/2" | C. HOT | EPOXY | |
Premier TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Proflo TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Proven Pipe Joint Compound | >= 1/2" | C. HOT | EPOXY | |
Proven TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Ross Pipe Thread Compound | >= 1/2" | C. HOT | EPOXY | |
Ross TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Slakey TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Sutherlands Pipe Thread Compound | >= 1/2" | C. HOT | EPOXY | |
Sutherlands TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Westburne TFE Paste | >= 1/2" | C. HOT | EPOXY | |
Winnelson TFE Paste | >= 1/2" | C. HOT | EPOXY |
Winholt Equipment | |
20 Crossways Park Drive North | |
Woodbury, NY 11797 | |
United States | |
516-222-0335 | |
Visit this company's website |
Facility : Columbus, OH
Mechanical Plumbing Devices
Trade Designation | ||||
Commercial Faucets | ||||
WS-SF-10ST-WH[G] | ||||
WS-SF-12ST-WH[G] | ||||
WS-SF-14ST-WH[G] | ||||
WS-SF-8ST-WH[G] | ||||
WS-SFSM-10ST-WH[G] | ||||
WS-SFSM-12ST-WH[G] | ||||
WS-SFSM-14ST-WH | ||||
WS-SPR-ST-WH[G] | ||||
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Faucets | ||||
WS-G.NECK-WH[G] | ||||
WS-GSDM-10-WH[G] | ||||
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Miscellaneous Faucet Components | ||||
WS-FP-K252000-WH[G] | ||||
WS-KV-K254000-WH[G] | ||||
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
WL Plastics Corporation | ![]() |
3575 Lone Star Circle | |
Suite 300 | |
Fort Worth, TX 76177 | |
United States | |
682-831-2727 | |
Visit this company's website |
Facility : Statesboro, GA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe[G] | ||||
WL Plastics GA | >= 1/2" | CLD 23 | PE | |
WLP GA | >= 1/2" | CLD 23 | PE | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Facility : Elizabethtown, KY
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe | ||||
WL Plastics KY[G] | >= 1/2" | CLD 23 | PE | |
WLP KY[G] | >= 1/2" | CLD 23 | PE | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Facility : Titusville, PA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe | ||||
WL Plastics PA/WLP PA | 1/2" - 24" | CLD 23 | PE | |
WL Plastics PA/WLP PA Blue | 1/2" - 24" | CLD 23 | PE | |
WL Plastics PA/WLP PA Blue Ice | 1/2" - 24" | CLD 23 | PE | |
WL Plastics PA/WLP PA Bluestripe | 1/2" - 24" | CLD 23 | PE |
Facility : Rapid City, SD
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe | ||||
WL Plastics SD[G] | >= 1/2" | CLD 23 | PE | |
WLP SD[G] | >= 1/2" | CLD 23 | PE | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Facility : Bowie, TX
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe Only | ||||
WL Plastics TX[G] | >= 1/2" | CLD 23 | PE | |
WLP TX[G] | >= 1/2" | CLD 23 | PE | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Facility : Lubbock, TX
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe[G] | ||||
WL Plastics LTX | >= 1/2" | CLD 23 | PE | |
WLP LTX | >= 1/2" | CLD 23 | PE | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Facility : Snyder, TX
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe | ||||
WL Plastics WTX[G] | >= 1/2" | CLD 23 | PE | |
WLP WTX[G] | >= 1/2" | CLD 23 | PE | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Facility : Cedar City, UT
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe | ||||
WL Plastics UT[G] | >= 1/2" | CLD 23 | PE | |
WLP UT[G] | >= 1/2" | CLD 23 | PE | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Facility : Mills, WY
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pipe | ||||
WL Plastics WY[G] | >= 1/2" | CLD 23 | PE | |
WLP WY[G] | >= 1/2" | CLD 23 | PE | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Wolverine Brass Inc. | |
2951 East Highway 501 | |
Conway, SC 29526 | |
United States | |
800-673-2803 | |
Visit this company's website |
Facility : San Clemente, CA
Mechanical Plumbing Devices
Trade Designation | ||||
Flexible Plumbing Connectors[Q] | ||||
57572US | ||||
57573US | ||||
57574US | ||||
57575US | ||||
57576US | ||||
57577US | ||||
57578US | ||||
57624US | ||||
57629US | ||||
57632US | ||||
57633US | ||||
57634US | ||||
57635US | ||||
57641US | ||||
57642US | ||||
57643US | ||||
57645US | ||||
57646US | ||||
57660US | ||||
57661US | ||||
57662US | ||||
57672US | ||||
57673US | ||||
57674US | ||||
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61. |
Xylem Inc. – Vertical Turbine Products | |
4608 Bradley | |
Lubbock, TX 79415 | |
United States | |
806-795-5700 |
Facility : Lubbock, TX
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Submersible Pump - Pump Ends[1][2][3][4][G] | ||||
Vertical Turbine Pumps - (1)(2)(3)(4)(5) | 5" - 30" | CLD 23 | MLTPL | |
[1] (1) May include any combination of the following sub-assemblies: bowl assembly, head assembly, column assembly. (2) Listing includes pumps suitable for applications in deep well/borehole, sump, and submersible. (3) Listing includes both enclosed and product lubrication methods . (4) Certification does not include submersible motor or cable. (5) Models include [s][m][c][t] s – Size of pump in inches (5 – 30) m – Pump model (A, B, C, CN, CS, D, DH, E, F, FD, FR, G, H, L, M, RA, RC, RG, RH, RJ, RWA, T, TN, TS, WA, WS) c – Impeller capacity, if applicable (EL, H, L, M) EL - Extra low, H - High, M - Medium, L - Low t – Impeller type (C, O, XC, C-LL) C - Closed, O - Open, XC - Low NPSHr, C-LL - Long Laterial[2] Certified for a minimum daily flow of 60,000 gallons.[3] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.[4] Certification does not include submersible motor, cable, washers, and clamps.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Pewaukee, WI
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Pumps - Submersible Pumps - Pump Ends[1][2][3][G] | ||||
Vertical Turbine Pumps - (1),(2),(3),(4),(5) | 30" - 60" | CLD 23 | MLTPL | |
[1] (1) May include any combination of the following sub-assemblies: bowl assembly, head assembly, column assembly. (2) Listing includes pumps suitable for applications in deep well/borehole, sump, and submersible. (3) Listing includes both enclosed and product lubrication methods . (4) Certification does not include submersible motor or cable. (5) Models include [s][m][c][t] s – Size of pump in inches (30 – 60) m – Pump model (A, B, C, CN, CS, D, DH, E, F, FD, FR, G, H, L, M, RA, RC, RG, RH, RJ, RWA, T, TN, TS, WA, WS) c – Impeller capacity, if applicable (EL, H, L, M) EL - Extra low H - High M - Medium, L - Low t – Impeller type (C, O, XC, C-LL) C - Closed O - Open XC - Low NPSHr C-LL - Long Laterial[2] Certified for a minimum daily flow of 21,600,000 gallons.[3] Certification does not include submersible motor, cable, washers, and clamps.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Xylem Water Solutions Zelienople LLC | |
108 Tomlinson Drive | |
Suite 400 | |
Zelienople, PA 16063 | |
United States | |
724-452-6300 | |
Visit this company's website |
Facility : # 4 USA
Process Media
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Filtration Media[1] | ||||
Anthracite Filter Media | .56 mm - 2 mm | CLD 23 | ANTH | |
[1] Carbon source is anthracite coal. |
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
Facility : Burlington, NC
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Filter Underdrain | ||||
Leopold Type 360 Underdrain Installation System[1] | [2] | CLD 23 | MLTPL | |
[1] Certification includes installation accessories: hold down bracket, end cap, cradle, wall plate, flume plate, and flume seal.[2] Certified for a minimum daily flow of 1 gallon/minute per square foot of filter area. |
Facility : Erie, PA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Filter Underdrain[G] | ||||
Leopold Texler Lamella Clarifier | [1] | CLD 23 | MLTPL | |
[1] Certified for a minimum daily flow of 0.2 gallons per minute per square foot of filter area.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Zelienople, PA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Filter Underdrain[G] | ||||
Leopold Texler Lamella Clarifier | [1] | CLD 23 | MLTPL | |
[1] Certified for a minimum daily flow of 0.2 gallons per minute per square foot of filter area.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
YSI Incorporated | |
1725 Brannum Lane | |
Yellow Springs, OH 45387 | |
United States | |
877-726-0975 | |
937-767-7241 | |
Visit this company's website |
Facility : Yellow Springs, OH
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Water Meters[G] | ||||
MagFlux® 7200 Sensor | 3/4" - 48" | CLD 23 | MLTPL | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
[1] Certified for SS316Ti electrode only.
Z Technologies Corporation | |
26500 Capitol Avenue | |
Redford, MI 48239 | |
United States | |
313-937-0710 |
Facility : Redford, MI
Protective (Barrier) Materials
Water | Water | |||
Water Contact | Contact | Contact | ||
Trade Designation | Size Restriction | Temp | Material | |
Coatings - Fittings | ||||
Z Shield® 2505 Black Dip Coating[1] | >= 1/2" | CLD 23 | ASPH | |
Z Shield™ 2000[2] | 3/4" - 120" | CLD 23 | ASPH | |
[1] Coating Notes: Colors: Black Number Of Coats: 1 Maximum Field Use Dry Thickness(in mils): 6 mils Final Cure Time/Temperature: 24 hours at 77°F Special Comments: Flush with tap water for 10 hours.[2] Coating Notes: Colors: Black Number Of Coats: 1-4 Maximum Field Use Dry Thickness(in mils): 5 (10 wet) Recoat Cure Time and Temperature: Immediately at 70°F Final Cure Time/Temperature: 7 days at 70°F | ||||
Coatings - Pipe | ||||
Z Shield® 2505 Black Dip Coating[1] | >= 3/4" | CLD 23 | ASPH | |
Z Shield™ 2000[2] | 3/4" - 120" | CLD 23 | ASPH | |
[1] Coating Notes: Colors: Black Number Of Coats: 1 Maximum Field Use Dry Thickness(in mils): 6 mils Final Cure Time/Temperature: 24 hours at 77°F Special Comments: Flush with tap water for 10 hours.[2] Coating Notes: Colors: Black Number Of Coats: 1-4 Maximum Field Use Dry Thickness(in mils): 5 (10 wet) Recoat Cure Time and Temperature: Immediately at 70°F Final Cure Time/Temperature: 7 days at 70°F | ||||
Coatings - Pump | ||||
Z Shield® 2505 Black Dip Coating[1] | >= 1/2" | CLD 23 | ASPH | |
[1] Coating Notes: Colors: Black Number Of Coats: 1 Maximum Field Use Dry Thickness(in mils): 6 mils Final Cure Time/Temperature: 24 hours at 77°F Special Comments: Flush with tap water for 10 hours. | ||||
Coatings - Valve | ||||
Z Shield® 2505 Black Dip Coating[1] | >= 1/2" | CLD 23 | ASPH | |
[1] Coating Notes: Colors: Black Number Of Coats: 1 Maximum Field Use Dry Thickness(in mils): 6 mils Final Cure Time/Temperature: 24 hours at 77°F Special Comments: Flush with tap water for 10 hours. |
ZCL Composites and Xerxes Corporation by Shawcor DBA Mattr | |
7901 Xerxes Avenue South | |
Minneapolis, MN 55431 | |
United States | |
952-887-1890 | |
Visit this company's website |
Facility : Williamsport, MD
Protective (Barrier) Materials
Water | Water | |||
Water Contact | Contact | Contact | ||
Trade Designation | Size Restriction | Temp | Material | |
Tanks | ||||
Potable Water Tank[1][2] | >= 550 gal. | CLD 23 | MLTPL | |
[1] Listed Potable Water Tank includes FRP Anti-Vortex Plate, Flanges, Nozzles (Gusseted and Flanged), Pump Platforms, Conical Nozzles, Baffles, and Ladders.[2] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified. |
Ziegler Chemical & Mineral Corp. | |
600 Prospect Avenue | |
Piscataway, NJ 08854 | |
United States | |
732-752-4111 | |
Visit this company's website |
Facility : Piscataway, NJ
Protective (Barrier) Materials
Water | Water | |||
Water Contact | Contact | Contact | ||
Trade Designation | Size Restriction | Temp | Material | |
Coatings - Fittings | ||||
AA-0344 WB-10[1] | >= 3" | CLD 23 | ASPH | |
AA-4108 Sealkote HF[2] | >= 3" | CLD 23 | ASPH | |
AA-4109 Drion FD-5[2] | >= 3" | CLD 23 | ASPH | |
AA-4117 Dri-Seal HF[2] | >= 3" | CLD 23 | ASPH | |
[1] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 3 dry Recoat Cure Time and Temerature: 7 days at 73°F[2] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 3 Maximum Thinner: None Final Cure Time and Temperature: 7 days at 75°F | ||||
Coatings - Pipe | ||||
AA-0344 WB-10[1] | >= 3" | CLD 23 | ASPH | |
AA-4108 Sealkote HF[3] | >= 3" | CLD 23 | ASPH | |
AA-4109 Drion FD-5[3] | >= 3" | CLD 23 | ASPH | |
AA-4117 Dri-Seal HF[3] | >= 3" | CLD 23 | ASPH | |
[1] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 3 dry Recoat Cure Time and Temerature: 7 days at 73°F[3] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 3 Recoat Cure Time and Temperature: 7 days at 75°F | ||||
Coatings - Tank | ||||
AA-0344 WB-10[1] | >= 1000 gal. | CLD 23 | ASPH | |
AA-4108 Sealkote HF[3] | >= 1000 gal. | CLD 23 | ASPH | |
AA-4117 Dri-Seal HF[3] | >= 1000 gal. | CLD 23 | ASPH | |
[1] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 3 dry Recoat Cure Time and Temerature: 7 days at 73°F[3] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 3 Recoat Cure Time and Temperature: 7 days at 75°F | ||||
Coatings - Valve | ||||
AA-0344 WB-10[1] | >= 3" | CLD 23 | ASPH | |
AA-4108 Sealkote HF[2] | >= 3" | CLD 23 | ASPH | |
AA-4109 Drion FD-5[2] | >= 3" | CLD 23 | ASPH | |
AA-4117 Dri-Seal HF[2] | >= 3" | CLD 23 | ASPH | |
[1] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 3 dry Recoat Cure Time and Temerature: 7 days at 73°F[2] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 3 Maximum Thinner: None Final Cure Time and Temperature: 7 days at 75°F |
Zoeller Company | |
3649 Cane Run Road | |
Louisville, KY 40211 | |
United States | |
502-778-2731 |
Facility : # 1 USA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Valves[G] | ||||
30-0015 | 1 1/2" | CLD 23 | MLTPL | |
30-0020 | 2" | CLD 23 | MLTPL | |
30-0030 | 3" | CLD 23 | MLTPL | |
30-0208 | 1 1/4" | CLD 23 | MLTPL | |
30-0211 | 3" | CLD 23 | MLTPL | |
30-0212 | 4" | CLD 23 | MLTPL | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Zurn PEX, Inc. | |
116 Maple Street | |
Commerce, TX 75428 | |
United States | |
903-886-2580 | |
Visit this company's website |
Facility : Harborcreek, PA
Mechanical Plumbing Devices
Trade Designation | ||||
Supply Stops[Q] | ||||
Zurn Qicktite® QV301 1/2" FPT x 1/2" MPT Angle Stop Valves | ||||
Zurn Qicktite® QV302 1/2" FPT x 3/8" OD Angle Stop Valves | ||||
Zurn Qicktite® QV311 1/2" T x 1/2" MPT Angle Stop Valves | ||||
Zurn Qicktite® QV321 3/4" MPT x 1/2" MPT Angle Stop Valves | ||||
Zurn Qicktite® QV401 1/2" FPT x 1/2" MPT Straight Stop Valves | ||||
Zurn Qicktite® QV411 1/2" MPT x 1/2" MPT Straight Stop Valves | ||||
Zurn Qicktite® QV421 3/4" MPT x 1/2" MPT Straight Stop Valves | ||||
Zurn Qicktite® QV504 Hose Thread - 1/2" FPT Hose Bib Valves | ||||
Zurn Qicktite® QV514 Hose Thread - 1/2" MPT Hose Bib Valves | ||||
Zurn Qicktite® QV524 Hose Thread - 3/4" MPT Hose Bib Valves | ||||
[Q] This product meets the reduced Q test statistic criteria of 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61. |
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[G] | ||||
Qest® 90° Drop Ear Ell, MPT x FPT | 1/2" - 1" | CLD 23 | POM | |
Qest® 90° Ell, MPT x MPT | 3/8" - 1 1/4" | CLD 23 | POM | |
Qest® 90° Street Ell, MPT x FPT | 1/2" - 1" | CLD 23 | POM | |
Qest® Angle Stop, FPT x MHT | 1/2" - 1 1/4" | CLD 23 | POM | |
Qest® Angle Stop, FPT x MPT | 1/2" - 1 1/4" | CLD 23 | POM | |
Qest® Angle Stop, MPT x MHT | 1/2" - 1 1/4" | CLD 23 | POM | |
Qest® Angle Stop, MPT x MPT | 1/2" - 1 1/4" | CLD 23 | POM | |
Qest® Cap, FPT | 1/2" - 3/4" | CLD 23 | POM | |
Qest® Check Valve, MPT x MPT | 1/2" - 1 1/4" | CLD 23 | POM | |
Qest® Coupling, FPT x FPT | 1/2" - 1" | CLD 23 | POM | |
Qest® Coupling, MPT x FPT | 1/8" - 1 1/4" | CLD 23 | POM | |
Qest® Coupling, MPT x MPT | 1/2" - 1 1/4" | CLD 23 | POM | |
Qest® Globe Valve, MPT x MPT | 1/2" - 1 1/4" | CLD 23 | POM | |
Qest® Plug, MPT | 1/2" - 3/4" | CLD 23 | POM | |
Qest® Straight Stop, FPT x MPT | 1/2" - 1 1/4" | CLD 23 | POM | |
Qest® Straight Stop, MPT x MPT | 1/2" - 1 1/4" | CLD 23 | POM | |
Qest® Straight Stop, MPT x MPT x MPT | 1/2" - 1 1/4" | CLD 23 | POM | |
Qest® Tee, MPT | 1/2" - 1 1/4" | CLD 23 | POM | |
Qest® Tee, MPT x MPT x FPT | 1/8" - 1/2" | CLD 23 | POM | |
Qickport Fittings | 1/2" - 1 1/4" | CLD 23 | POM | |
Qicktite Fittings | 1/2" - 1 1/4" | CLD 23 | POM | |
ZurnPEX Fittings | 1/2" - 1 1/4" | CLD 23 | POM | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. | ||||
Manifolds[G] | ||||
1" MPT Manifold Adapter - Female (QPAF) | 1" x 1/2" | C. HOT | PSU | |
1" MPT Manifold Adapter - Male (QPAM) | 1" x 1/2" | C. HOT | PSU | |
1" MPT Manifold Eldow (QPE) | 1" x 1/2" | C. HOT | PSU | |
1" MPT Manifold Tee (QPT) | 1" x 1/2" | C. HOT | PSU | |
ZurnPEX 3-Port Manifold body | 1" x 1/2" | C. HOT | PSU | |
ZurnPEX 5-Port Manifold body | 1" x 1/2" | C. HOT | MLTPL | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Zurn PEX, Inc. | |
116 Maple Street | |
Commerce, TX 75428 | |
United States | |
903-886-2580 |
Facility : # 9 USA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[G] | ||||
QXXBC32TGX | 3/4" – 1 1/4" | C. HOT | BRASS | |
QXXBC42TGX | 3/4" – 1 1/4" | C. HOT | BRASS | |
QXXBC43TGX | 3/4" – 1 1/4" | C. HOT | BRASS | |
QXXBC53TGX | 3/4" – 1 1/4" | C. HOT | BRASS | |
QXXBC54TGX | 3/4" – 1 1/4" | C. HOT | BRASS | |
QXXBC64TGX | 3/4" – 1 1/4" | C. HOT | BRASS | |
QXXBC65TGX | 3/4" – 1 1/4" | C. HOT | BRASS | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Point Comfort, TXFormosa Plastics Corporation, Texas 201 Formosa Drive P.O. Box 700 Point Comfort, TX 77978 United States 361-987-7960
Trade Designation
Resin [1] Use of this ingredient in NSF Certified products requires prior authorization from NSF.
Number of matching Manufacturers is 761
Number of matching Products is 21562
Processing time was 21 seconds